Shopping Search

This is a brand-new E5 circulation pump (part number 74427 aka E5-NSHN1_14) from Watkins manufacturing - this is not a rebuilt part.  This new model uses less electricity and moves more water per minute than the older circulation pump. This small circulation pump is used on the following models: Tiger River Spas: all models Hot Spring Spas: 1986 to current Limelight Spas: 2008 to Current Caldera Spas:  all models Replaces part number 73588 and73491 (old model SilentFlo 5000).  The new E5 circulation pump is designed to replace your SilentFlo 5000 with no retrofits to your tub.  Installation instructions are included. Please note that it does not come with a cordset, so you will have to use the one from your existing pump. If a new one is required please call our store, or write note in comment section of ordering process. Tech Note: This pump should NOT be operated without water present in the spa. If a "dry run" occurs , the pump has an internal safety device that will automatically shut it down. To reset this pump simply power down the spa for 30 seconds then power it back up.  

This is a 4 pack of the Hot Spring Tri-X filters - part number is 73178 (the filter has 0969601 imprinted on it). Stop messing around with paper filters and try the Hot Spring Tri-X filter.  The unique 3 dimensional design enables it to filter twice the water per minute than a common paper filter and delivers a more effective filtration and lasts longer. You don’t have to clean it as often either and it is dishwasher safe! Note: no soap or drying cycle.  Click here to download the Tri-X cleaning procedure. This 4 pack of filters will work in the following models: Highlife QTY 4 2003 and 2006 (Costco) Vanguard V and Vanguard VV QTY 4 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

This is a Caldera Spas IQ2020 Control Box part number 73181 for 2002 through 2008 model years on these models: Caldera Spas Utopia Series, Tahitian, Niagra, Geneva Caldera Spas Aquatic Melodies Series Elation, Aspire Caldera Spas Paradise Series Moorea, Hawaiian, Martinique and Kauai.  

This is the newly designed Hot Spot Freshwater III Ozonator system part number 72606. The newly designed system replaces the Freshwater II system. The Freshwater® III CD Ozonator produces ozone differently than the typical ultraviolet style ozonators from other manufacturers. This uses the corona discharge method of ozone generation and will crank out a higher concentration (PPM) of ozone and that concentration level won't decrease over the years like the ultraviolet style ozonators. This model is intended for Hot Spot hot tubs only.  Installation time is about 45 minutes. Power Consumption: 8 watts, .21AMP.  Instructions included. This model replaces obsolete part number 72870.

This is a genuine Watkins Titanium PDR heater part number 73791 (old part number 73039) and is not a 3rd party brand. This No-Fault PDR (Power Down Reset) Titanium Heater is the newest universal replacement heater from the makers of Hot Springs spas. Its double-pass sleek design replaces all previously discontinued heater styles that are listed below. The double-pass feature efficiently heats the water in two stages. Now factory approved and warranted for all 230volt installations for 1995-Current Hot Spring and Tiger River spa models. This heater replaces all No Fault® 6000 heaters, Watkins Hot Spring No Fault® 5500 cartridge heater elements, No-Fault 6000 cartridge heater replacements.   UPS 2 DAY SHIPPING NOTE:  YOU MUST STILL SELECT FREE SHIPPING DURING THE CHECKOUT PROCESS.  WE WILL CHANGE IT TO UPS 2 DAY WHEN WE PROCESS YOUR ORDER.   This heater is used in the following spa models: HotSpring:  Aria, Envoy, Grandee, and Vista models use PN 73791 4kw Heater (the Classic, Jetsetter, Prodigy, Sovereign, and Vanguard use the 73790 6kw heater Heater) Tiger River: Caspian uses the 73791 4kw Heater (the Sumatran and Bengal use the 73790 6kw heater) Limelight: all Limelight Spas by Hotspring use this 4kw heater  Not sure if this is the right part?  Contact us with the year and model (and serial number if posible) of your spa and we can confirm using our Hot Spring diagnostic tools and guarantee it is the right part. What's Included: Watkins No-Fault PDR Titanium Heater, 1/4" vinyl tubing 12", 1/4" clamps & thermistor o-rings, and easy-to-follow install instructions for the DIYer

This is a genuine Watkins replacement heater part number 73790 and is not a 3rd party brand. Watkins Titanium PDR (Power Down Reset) Heater Assembly, 6kw (220/230V spas) / 1.5kw (110/115V spas) - see spa model listing below.   UPS 2 DAY SHIPPING NOTE:  YOU MUST STILL SELECT FREE SHIPPING DURING THE CHECKOUT PROCESS.  WE WILL CHANGE IT TO UPS 2 DAY WHEN WE PROCESS YOUR ORDER.   What's Included: Watkins No-Fault PDR Titanium Heater, 1/4" vinyl tubing 12", 1/4" clamps & thermistor o-rings, and easy-to-follow install instructions.  It is easiest to replace this part when the spa is drained but you can try removing the vinyl tubing from your old heaters and corking them. This is the newest universal replacement heater from the makers of Hot Springs spas. Its double-pass sleek design replaces all previous heater styles and the double-pass feature efficiently heats the water in two stages. Now factory approved and warranted for all 115 volt and 230 volt installations. This heater replaces all No Fault® 6000 heaters, Watkins Hot Spring No Fault® 5500 cartridge heater elements, and No-Fault 6000 cartridge heater replacements. Not sure if this is the right part?  Contact us with the year and model (and serial number if posible) of your spa and we can confirm using our Hot Spring diagnostic tools and guarantee it is the right part. The 73790 6kw/1.5kw heater is for the following spa models: Hot Spring: Classic Jetsetter Prodigy Sovereign Vanguard Highlife Landmark Summit  NOTE: the Aria, Envoy, and Vista models use the part number 73791 4kw heater Tiger River: Khyber Manora Siberian Sumatran Bengal Tondi  NOTE:  the Caspian uses the part number 73791 4kw Hheater Limelight: All Limelight Spas by Hotspring use the part number 73791 4kw heater

Genuine replacement filter for Caldera Spas Utopia Niagara model spa, 100 Sq. Ft Filter part number 73722 (with cap). This filter works in the following models:  Utopia Niagara   2003, 2004, 2005, 2006, 2007, 2008 2009, 2010, 2011    NOTE:  The 2002 Utopia Niagara model uses part number 73531. Dimensions Outside diameter 8"  Inside diameter  3 5/8"  Length 16-1/2" Identical to: 17-175-1141 171751141 FC-3965 C-8399 PLE-051-9370 PCD100W C-8399 C-8401 645544039651 1039607

The PoolWarden is the most advanced single and multiple pool chemical controller available, providing the ultimate in pool and spa chemical automation. Single pool version includes 3 dry contact output relays (3 per pool) providing control for pH, sanitizer, heaters, pumps and alarm outputs. The easy to read 80 character display with back-light and 16 button keypad makes setting up the PoolWarden quick and easy. Setup wizards are included for standard types of control including acid, base, cal-hypo, erosion feeders, salt systems, heaters and more. -Includes Temperature sensing -Programmable pH, ORP and temperature setpoints. -Proportional feed for precise chemical control with minimal overshoot. The proportional feed percentage is also adjustable -Each relay has a wizard for configuration making setup a snap. -80 Character display with back light. -2 Levels of password protection and a lockable enclosure. -16 Button keypad for easy value entry. -Includes real time clock with both the time and date. -Designed to work with salt chlorine generators. -Control options include programmable feed on and off times, proportional control and over-feed limits -Includes 3 Dry contact relays that can be connected to 110 VAC internally, or other voltages when supplied externally. -Programmable manual feed mode. -All relays disable for when the pool is being serviced. -Service Logging with the optional WIFI communication, track when and who serviced the pool. -Data recording with the optional WIFI. The flow cell is pre-mounted on 3/8 white polypropylene backboard with space free for installing a feed pump. The pH and ORP sensor have their protective caps on, 3 foot color coded BNC cables are included as well as 2 - 1/2" tube to 1/4" NPT Jaco fittings.

The Clean Screen Water Pre Filter (part number 76028) should be used when filling your spa to ensure water is as clean as possible and can be used on any Hot Spring, Hot Spot, Limelight, Caldera, Solana, and Tiger River spas. One-of-a-kind pre-filter traps organic contaminants, metals (such as copper and iron), and tannins before they are introduced to the spa. It does not contain silver ions, so it can be used with any chlorine, bromine, or biguanide water care programs. Helps decrease the need for additional chemicals which means less work for the hot tub owner Contributes to a lower Total Dissolved Solids (TDS) level which may extend the life of the water, which will also save you time and money Attaches to garden hose to filter out iron, copper, rust, dirt, detergents, algae and chemicals Use Hot Spring Clean Screen Pre-Filter to fill your spa through the filter compartment. Typical lifespan is 5 years or 5, 000 gallons Includes on/off valve connector Use every time you fill, refill or top-off your hot tub.

Genuine replacement filter for Caldera Spas Utopia Tahitian model spa, 100 Sq. Ft Filter part number 73722 (with cap). This filter works in the following models:  Utopia Tahitian   2002, 2003, 2004, 2005, 2006, 2007, 2008 2009, 2010, 2011    Dimensions Outside diameter 8"  Inside diameter  3 5/8"  Length 16-1/2" Identical to: 17-175-1141 171751141 FC-3965 C-8399 PLE-051-9370 PCD100W C-8399 C-8401 645544039651 1039607

Genuine replacement filter for Caldera Spas C-Series model C-30 or C-45, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  C-30   2006, 2007, 2008, 2009   C-45   2006, 2007, 2008, 2009  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Utopia Elation model spa, 100 Sq. Ft Filter part number 73722 (with cap). This filter works in the following models:  Utopia Elation    2009, 2010    Dimensions Outside diameter 8"  Inside diameter  3 5/8"  Length 16-1/2" Identical to: 17-175-1141 171751141 FC-3965 C-8399 PLE-051-9370 PCD100W C-8399 C-8401 645544039651 1039607

The PoolWarden is the most advanced single and multiple pool chemical controller available, providing the ultimate in pool and spa chemical automation. Includes 3 dry contact output relays providing control for pH and sanitizer and an auxiliary such as a heater, pump or alarm output. The easy to read 80 character display with back-light and 16 button keypad makes setting up the PoolWarden quick and easy. Setup wizards are included for standard types of control including acid, base, cal-hypo, erosion feeders, salt systems, heaters and more. -Programmable pH, ORP and temperature setpoints. -Proportional feed for precise chemical control with minimal overshoot. The proportional feed percentage is also adjustable -Each relay has a wizard for configuration making setup a snap. -80 Character display with back light. -2 Levels of password protection and a lockable enclosure. -16 Button keypad for easy value entry. -Includes real time clock with both the time and date. -Designed to work with salt chlorine generators. -Control options include programmable feed on and off times, proportional control and over-feed limits -Includes 3 Dry contact relays that can be connected to 110 VAC internally, or other voltages when supplied externally. -Programmable manual feed mode. -All relays disable for when the pool is being serviced. -Service Logging with the optional communication, track when and who serviced the pool. -Data recording with the optional WIFI. - Heater control includes energy management, the ability to lower the temperature during times on non use - ORP Conditioner calibration factor, adds a second setpoint for better sanitizer control when there is stabilizer in the water.

This is a factory replacement (part number 72596) teal pillow  for Hot Spring Spa models from 2002 (2nd quarter) through 2007 (1st quarter).  Hot Spring no longer offers the two-piece design (as shown in the old style picture). If you have a pre-2002 (2nd quarter) hot tub, you will need part number 71854. Model years 2002, 2003, 2004, 2005, 2006, and 2007.

Genuine replacement filter for Caldera Spas Paradise Moorea model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Moorea   2006, 2007, 2008, 2009, 2010  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Paradise Hawaiian model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Hawaiian   2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

  Deluxe Leaf Bagger from Blue Devil Quickly removes leaves, bugs, and debris from your pool. Balanced for performance - its unique design keeps the front edge down for quick cleaning action. 8 powerful water jets SWIVEL WHEELS for easy cleaning connects to garden hose on/off water valve included quick-connects to standard pool pole E-Z on/off collection bag long life heavy duty construction Blue Devil has over 20 years of experience in high quality Pool & Spa products.   The Pool and Spa Center sells only Blue Devil products in our two stores and we use these same items in the field.

Genuine replacement filter for Caldera Spas Vacanza Series Palatino model spa, 65 Sq. Ft Filter part number 71827.  (NOTE:  this filter has 31114 stamped on the bottom.) This filter works in the following models  Vacanza Palatino  QTY 1 2010, 2011 Dimensions: Top:  Open Hole 3" Bottom:  Open Hole 3" Width:  8 1/2" Length:  10 1/2"   Same as: Filbur:  FC-3960 Pleatco:  PWK45N Unicel:  C-8465

Genuine replacement filter for Caldera Spas Caldera Spas Highland Series Olympia Model Spa Filter model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Highland Olympia   2003, 2004, 2005, 2006, 2007, 2008, 2009  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Paradise Tahitian model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Tahitian   2002, 2003, 2004, 2005  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Paradise Geneva model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Geneva   2002, 2003, 2004  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Vacanza Series Marino model spa, 65 Sq. Ft Filter part number 71827.  (NOTE:  this filter has 31114 stamped on the bottom.) This filter works in the following models  Vacanza Marino   QTY 1   2010, 2011  Dimensions: Top:  Open Hole 3" Bottom:  Open Hole 3" Width:  8 1/2" Length:  10 1/2"   Same as: Filbur:  FC-3960 Pleatco:  PWK45N Unicel:  C-8465

Genuine replacement filter for Caldera Spas Paradise Niagara model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Niagara   2002, 2003  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Paradise Salina model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Paradise Salina   2011  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Utopia Hawaiian model spa, 75 sq. ft. filter part number 73531 or also known as 1019301. This filter works on the following models:  Utopia Hawaiian   2002  DimensionsOutside diameter 7" Inside diameter 2 5/8" Length 14-3/4"

Genuine replacement filter for Caldera Spas Highland Cascade model spa, 50 sq ft filter part number 73532 or also known as 1019401. This filter will work on the following models:  Highland Cascade   2002, 2003  Dimension Outside diameter 7"  Inside diameter 2 5/8"  Length 10-3/4" 

This is a OEM factory replacement black cover locks part number 71515 and contains both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws. This kit replaces all other colors and styles for all Hot Spring, Tiger River, Hot Spot and Solana spa models. Don't forget the optional keys!

The Solana Freshwater AG+ Continuous Silver Ion Sanitizer will give you brilliantly clear, odor free spa water: Nature2 Mineral Sanitizer for spas Reduces potential for unpleasant odor and scum lines Enhanced bather comfort Installs in seconds - right into your spa filter Relax while it consistently and conveniently sanitizes your water Change every 4 months Specifically designed to use with HotSpring Tiger River, Hot Spot and Solana spas Compatible with the Freshwater III ozone systems Not for use with Bromine Manufacturer Part Number:  71325

Genuine replacement filter for Hot Spot Spas, 65 Sq. Ft.  Part number is 71827.  (NOTE:  this filter has 31114 stamped on the bottom.) This filter will work with the following Hot Spot models: La Palma QTY 1 2008, 2009  Relay QTY 1 2010, 2011 Tempo QTY 1 2010, 2011 Dimensions: Top:  Open Hole 3" Bottom:  Open Hole 3" Width:  8 1/2" Length:  10 1/2"   Same as: Filbur:  FC-3960 Pleatco:  PWK45N Unicel:  C-8465

This is a genuine replacement warm gray spa pillow for the Solana SX, TX & X spa models part number 73553.