Shopping Search

Amplify Those Signals! Designed specifically for AM/FM radio reception, the K2622 provides 22dB gain between 10MHz and 150MHz. The sleek metal housing provides the necessary shielding and assures you of the least amount of interference. Input power is 12-15VDC at 2mA and can be powered directly or up the coax. Input/output impedance is 50-75 ohm. Measures 3.4 x 1.4 x .9. From Velleman. ;

The MXR M-80 Bass Direct Box with Distortion is more than just a direct box. It's got so many features, you may wonder how you ever did without it! It includes a distortion channel with gain, volume, and blend controls; a noise gate to help keep it clean; a Color control; and 3-band EQ control that lets you dial in any tone you need. It also provides phantom power, and sports a parallel output jack for flexibility in routing.

Input impedance 470K ohms, output impedance <150 ohms, maximum input/output level +20dBu, MIDI in 7 pin DIN, power requirements 9VAC 3400mA, dimentions 19" x 1 75" x 7", UL and CSA approved operation VooDu Valve⢠is a trademark of Rocktron Corporation All Access® and HUSH® are registered trademarks of Rocktron Corporation

Ultra-compact 9.5 inch microphone modeling preamp for studio and stage applications High-end preamplifier for all microphone, instrument and line-level sources. Perfectly complements studio-grade condenser mics Ultra-flexible Preamp Modeling allows you to quickly optimize your recordings Choose between 16 preamp voicings designed for electric and acoustic guitars, keyboards, bass guitars, drums, vocals, etc. Authentic VTC Tube Modeling technology creates the warmth of vacuum tubes

The Pure XLR Preamp has the same great sound and super low noise as the time-proven K&K Pure Preamp with the addition of a DI balanced XLR out and a phase switch. It is 9-volt battery or phantom power operated, features a 1/4" line-out, plus the XLR active balanced output in a compact package. The Pure XLR Preamp is specially designed to complement our line of Pure pickups. However, due to its adjustable input gain and wide frequency range it will work with many more applications. The Pure XLR Preamp features +/-20 db bass, mid, and treble controls, plus an adjustable input gain control. Its simple and super-noiseless circuit provides unsurpassed clarity and power and the adjustable input gain allows you to dial in the precise amplification factor needed for your instrument. An LED light indicates if phantom power is present. Frequency response is 10-30, 000Hz. The bass control is set to roll of at 100Hz, the midrange at 1.5kHz with extra large bandwidth and the treble are set at 10kHz. Input impedance is 1 me

We've managed to distill the essence of Eden tone into this handy little direct box/preamp. Eden fans have been requesting this for quite a while and we've listened. Much more than a direct box, the WTDI is like bringing a little Eden preamp to every stage and studio gig. Always have one handy in your gigbag, case or pedal board. Use it to Edenize that junk box of an amp they gave you for backline at the gig by going direct into the power amp section. Use it to add a 2nd, 3rd or solo/boost channel to your current rig. Also works extremely well with acoustic guitars & basses.

The MP13 is designed to provide a small, simple, and inexpensive microphone pre amplification for a variety of applications. The unit has both XLR and 1/4" Inputs and Outputs, and a single Gain control with a Clip indicator. Phantom powering is included for use with a condenser microphone. The 1/4" Output is specially designed for use as either a mono unbalanced output, or a stereo headphone output. The unit comes complete with a power adapter.

No Description

No Description

Product Features: Guitars Amps Type: Guitar Preamps; Musical Instrument Type: Bass Guitars, Amps and Accessories

In the 400W headlite Bass Amp Head a legendary SWR tube preamplifier meets Class D power amp technology! The SWR headlite, weighing just under 4 lbs, delivers the tonal clarity SWR amps are famous for, as well as an astonishingly thunderous low-end response for such a diminutive package. But don't let the SWR headlite amp's size fool you, this is a full-featured, professional-quality bass amplifier!Ideal as a stand-alone amp in a head/speaker rig or partnered with SWR's amplite—a matching 400W power amplifier—in a multiple power-amp rig, the headlite is an extremely versatile performance amplifier for stage or studio. The SWR headlite amp head includes a handy accessory bag designed for a headlite, an amplite and all the necessary cables, or it can be rack-mounted in 1/2-rackspace with the optional rackmount kit. The optional SWR headlite 2-button footswitch lets you mute and turn the effects loop on or off as well as containing an integrated bass tuner.

The SSL Xlogic Alpha VHD preamp gives you the flexibility to track transparent, clear audio, or add sonic character ranging from warm to raging. Four premium SSL preamps (with up to 75dB of gain) are on board the Alpha VHD, combined with a Variable Harmonic Drive circuit that will make this unit an incredibly versatile part of your signal chain. You already know SSL's products feature quality and reliablity that's second to none; now get some of that great SSL sound for yourself with the Alpha VHD preamp!SSL Xlogic Alpha VHD 4-channel Preamp at a glance:SSL quality and innovationVariable Harmonic DriveAn array of controlsSSL quality and innovationBased on the VHD circuit from SSL's Duality console, the VHD Pre adds four SSL mic preamps to any line level DAW audio interface, transforming it into a professional quality, multi-channel analogue recording system. These preamps provide up to 75dB of gain, so everything from robust line-level instruments to delicate ribbon mics will benefit.Variable Harmonic DriveThe preamps are combined with independent Variable Harmonic Drive circuits that use 100% analog signal paths to generate rich harmonic distortion - adding SSL analogue attitude to your digital recordings. As you increase the input gain, the Variable Harmonic Drive circuit introduces a blendable mix of 2nd or 3rd harmonic distortion to your source material, taking it from gentle tube-style warmth to transistorized clipping. It's a new world of overdriven possibilities.ControlYou get an array of controls, including illuminated 20dB pad switches, Hi-Z switches, individual input, output, and Variable Harmonic Drive controls for each channel. You can really take control of your signal and add character with this preamp.SSL Xlogic Alpha VHD 4-channel Preamp Features:Ultra-clean SSL preamp with 75dB of gain48V phantom power20dB pad switches that illuminate to indicate overloadHi-Z switches to accommodate mic, line and instrument level signalsFour independent Variable Harmonic Drive systemsFront panel 1/4" jack instrument/line level inputs with passive DI type impedance detection and level matchingIndividual input, output and VHD controls for each sectionRear panel XLR mic/line inputs and XLR outputThe SSL Xlogic Alpha VHD preamp lets you add as much color to your sound as you want!

LOW NOISE GAIN-SELECTABLE STEREO PREAMP - HARD WIRED SOUND PROFESSIONALS - LOW NOISE GAIN-SELECTABLE PORTABLE STEREO PREAMP. MADE IN USA. Finally, a great sounding, low noise, high quality preamp that runs on a battery! This preamp will give you professional quality amplification for your microphones. On the hardwired versions, there is a power switch to turn the unit on and off. On the removable cable version, the power is turned off by unplugging the output cable. Add a set of built-in quality stereo mics here for only $30 more! Used to raise high or low impedance microphone signal level to line level 3 amplifier gain ranges for maximum flexibility 0dB gain for recording loud sounds (loud rock concerts, etc.) 22dB gain for recording medium sounds (acoustic music, lectures, meetings, rehearsals, etc.) 42dB gain for recording quiet sounds (nature sounds, distant talking, soft spoken people, etc.) Output cable: choice of 24" shielded cable terminated with right angle 1/8" (3.5mm) stereo mini plug or several re

The UltraSound DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after UltraSound's famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power.

This is a reprint of an Audio Review from 1978!This review will have SPECS, COMMENTARY, DETAILS, and INFORMATION about the unit listed..You won't be dissapointed! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5" by 11" -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additiona

SOUND PROFESSIONALS - LOW NOISE GAIN-SELECTABLE PORTABLE STEREO PREAMP. MADE IN USA.Finally, a great sounding, low noise, high quality preamp that runs on a battery! This preamp will give you professional quality amplification for your microphones. Other similar preamps available (sometimes for under $50) offer similar amplification, but not with this low level of noise and distortion. When looking for a mic preamp, it's important to look closely at the frequency response, noise and distortion specifications. If you don't see them, there is usually a good reason! Previously, preamps of this quality cost several hundred dollars - now, you can get professional quality for much less!The output cable is available in two versions: A permanently installed "hardwired" cable or one of several removable cable options (see option box above). On the hardwired versions, there is a power switch to turn the unit on and off. On the removable cable version, the power is turned off by unplugging the output cable.Add a set of built-in quality stereo mics here for only $30 more! * Output level control - allows you to fine tune the output of the preamp within the gain range you select (especially useful for recorders that do not have recording level adjustments built-in). Note: This control comes after the amplifier, not before, to maximize performance and minimize noise. * Runs 75+ hours on a single 9 volt battery * Output cable: choice of 24" shielded cable terminated with right angle 1/8" (3.5mm) stereo mini plug or several removable cable options * Input connector: 1/8" (3.5mm) stereo mini jack * Signal to noise ratio: 117 dBu EIN unweighted (quieter than built-in Walkman preamps) * Harmonic distortion: 0.06% * 106dB dynamic range * Frequency response 20 to 20khz +/- 1dB * EMI input protection * High output drive-capable of providing 1.5V RMS into a 10K load * Built-in

Acoustic preamp. Made by Fishman. The Fishman Pro-EQ Platinum is simply the best acoustic preamp that money can buy! A feature-loaded preamp/D.I, this unit utilizes a four-band equalizer, modeled after the versatile Fishman Prefix Plus onboard preamp. Each band of the Pro-EQ Platinum's EQ section is assigned to just the right frequencies for acoustic equalization. Also borrowed from the Prefix Plus design are feedback fighting phase and notch controls. An innovation for the Pro-EQ Platinum is Fishman's "Smooth" acoustic compression circuit. It subdues the explosive high frequencies when you strum hard or snap the strings. Additionally, the Pro-EQ Platinum has a balanced XLR output. This output will allow you to power the Platinum via phantom power and the ground lift feature will function even with the phantom power applied. Suitable for all acoustic instruments, including guitar, banjo and mandolin as well as stringed instruments.

Avalon microphone preamplifiers have been in use around the world since 1986. All preamplifiers share the combined technologies of low ratio transformer balanced inputs coupled with high-voltage cascade FET twin bipolar discrete class A amplifiers.

Rocktron Prophesy II - valve preamp and effects processor. The preamp section of the Prophesy features four channels each with their own distinct "voicings" to provide a vast array of desired valve amp sounds. Each voicing may be thought of as a 'channel' and each channel has its own basic gain and master controls with bass, mid, treble and presence controls, all easily accessible with 'real amp' knobs on the front panel, just like a regular amp head.

No Description

Avalon AD2022 Microphone Preamp Details The AD2022 is Avalon's fourth generation of fully discrete, symmetrical Pure Class A microphone preamplifiers.

Footswitchable 3-band EQ with sweepable midrange frequencies Overdrive circuit Flexible gain structure, can drive a power amp! Switchable pre/post eq balanced output Ground lift switch

The Microphono PP400 is a small preamp designed to boost the signal from your turntable to a line level suitable for sending to a mixer, computer, speakers, or other equipment. Features dedicated RCA and 1/4" outputs and RCA inputs.

Completely eliminate the static you've caught lately about your wardrobe by rocking the legit Preamp L/S Shirt from Hurley®. Lightweight cotton fabric provides for an exceptional wear. Eye-popping plaid pattern keeps you looking great. Spread collar. Full button-up front closure. Black chambray inside yoke. Long sleeves can be rolled and buttoned at the elbow. Buttoned flap chest pockets. Hurley logo tag at left chest pocket. Shirttail hem. 100% cotton. Machine wash cold, tumble dry low. Imported. Length: 31 in ; Chest Measurement: 42 in ; Product measurements were taken using size MD. Please note that measurements may vary by size.

Usually 3-5 Days. 45 Day Lowest Price - 100% Satisfaction Guarantee. The ADL 600 is a high voltage two-channel microphone preamp that utilizes a unique Class A discrete design with 3 vacuum tubes per channel for maximum headroom and tonality. The ADL 600 is big, warm, smooth, and clear; a sound like no other.

Product Featuresseparate Gain Control For Preamp And SubwooferRms Power Rating: 8 Ohm: 300 Watts4 Ohms: 550 Watts2 Ohms: 800 WattsMax Power Output: 3000 WattsInputs: Rca (2 Audio Sources) Outputs: Banana Binding Post (to Speakers) 1 Rca Dedicated For Record Line Output2 Mono Rca Dedicated For Subwoofer Output 1 Rca Dedicated For Preamp OutputDigital Fluorescent Output Display MeterIpod / Mp3 Input With Cable110-220v SwitchableAm/fm Quartz Synthesized Tuner Auto Station SeekWeight: 14.3 Lbs (6.5 Kg)Dimensions: 13inl X 19inw X 3-1/16inh1-year Manufacturer's Warrantyinputs And Outputs2 X Microphone - Front4 X Binding Post Speaker Terminal - Rear1 X Headphone - Front2 X Rca Subwoofer Out - Rear1 X Rca Pre-amplifier Line Out - Rear1 X Ipod - Front 2 X Rca Stereo Audio Line In - Rear

EMG PA2 Preamp/Booster, 1 Miniswitch, Boost 0 - 20 dB, for Guitars and Basses, for EMGs and passive Pickups Guitars, Basses, Amps / Misc. Acessories

The Eureka is a professional recording channel strip containing a discrete class A transformer-coupled microphone preamplifier, compressor, and three-band parametric equalizer. The microphone preamplifier features variable input impedance so that the Eureka can be matched and "tuned" for all types of microphones and recording applications. The Class A transformer-coupled microphone preamplifier also features "SATURATE" which adjusts the drain current on the input FET amplifier to simulate of the effects of tape saturation and tube "warmth".The Eureka's ultra fast compressor has both soft and hard knee compression as well as a separate make up gain stage and hi-pass side chain compression to deliver hard pumping to ultra transparent compression and everything in between. The Eureka's three-band fully parametric EQ gives you variable Q (bandwidth) on each band as well as an EQ pre COMP switch to put the EQ before the Compressor in the signal path.

The EMG PA-V2 is an active pickup set with preamp for P-Bass. The PA-V2 includes two pickups, pre-wired harness and connectors, volume and tone controls, and mounting screws. The PA-V2 system has an embedded high output, low noise preamp for extended frequency range and sonic clarity. The PA is a new bass pickup option based on one of EMG's originals, the P-series pickup. This new addition differs in that it uses Alnico V magnets instead of the ceramic magnets of the original. Because the PA utilizes Alnico V magnets coupled with short, squat coils, the tone is endowed with openness and warmth for a more vintage tone, all with less noise and more signal. We have no doubt that the new PA, with its natural presence, powerful lows, expansive midrange, and superior definition, will be as successful as its predecessor. Package Includes: EMG's exclusive Quik-Connect cable, prewired solid shaft volume/tone control set, output jack, battery clip set, adjustment screws.

###############################################################################################################################################################################################################################################################