Shopping Search

I have a large supply of unused, brand new stock on this 2 gal. reservoir. These tanks are used on Fenner/Stone hydraulic power units. Included is a new filler/breather cap a 4 mounting bolts. The tank is 13 inches long, 6.7 inches wide and 7.34 inches from bottom to the top of the molded breather port.

No Description

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

The Zamac Nailin is a nail drive anchor which has a body formed from Zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light duty, tamperproof applications. This anchor is not recommended for applications overhead. For overhead applications, please refer to the Zamac Hammer-Screw.

No Description

1/2 x 2 3/4 Mushroom Spike Zinc (50) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

No Description

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

No Description

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

1/4 x 2 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

PC-7® is the tough job epoxy! This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7® formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High wet grab or tack of PC-7® Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. ***Note: PC-7® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt. As Adhesive: Wood, Metal (all types), Glass, Brick, Block, Rubber, Concrete, Stone, Slate, Fiberglass, tile, and more in any and all combinations. As Sealant: Oil, Gas, Water Tanks, Cellar Cracks, Pressure Tanks, and Plumbing Leaks. As a Filler: Holes, Castings, Patterns, Molds, Voids, Wel

120 Volt 1000 Watt Spec Grade Magnetic Low Voltage Digital Fade Dimmer from the Maestro Wireless CollectionMagnetic low voltage spec grade 120 volt 1000 watt capacity digital fade dimmer.Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. The Pico- Wireless control and Radio Powr Savr- sensors give the system even greater flexibility, plus the added benefit of improved energy savings. The system is incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls all with the touch of a button.Features:Built in radio allows control from Pico - wireless control or Radio Powr Savr - occupancy/vacancy sensors.Delayed off provides light as you exit the room.LEDs glow softly in the dark so you can easily find the dimmer.Use companion dimmers to dim from up to ten locations.Power failure memory - Maestro Wireless remembers your settings even after a power interruption.Multi-location dimming compatible with 3-way wiring for easy installation and retrofit.Tap once for favorite level; tap twice for full on.Touch rocker to adjust light level.Available in 27 colors.Coordinating Claro wallplates available separately.Matching switches and accessories available.Incandescent/halogen and magnetic low voltage models available.Uses Lutron s reliable Clear Connect RF Technology -.3-wire, single-pole/multi-location dimmer.120V/277V, 6 A light, 3-wire fluorescent, Hi-lume, Compact SE, ECO-10, and EcoSystem ballasts.Specifications:Voltage: 120Wattage: 1000

3/16 x 2 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/2 x 3 1/2 Mushroom Spike Zinc (50) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/4 x 2 1/2 Mushroom Spike 316 SS (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

3/16 x 1 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

PC-7® is the tough job epoxy! This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7® formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High wet grab or tack of PC-7® Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. ***Note: PC-7® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt. As Adhesive: Wood, Metal (all types), Glass, Brick, Block, Rubber, Concrete, Stone, Slate, Fiberglass, tile, and more in any and all combinations. As Sealant: Oil, Gas, Water Tanks, Cellar Cracks, Pressure Tanks, and Plumbing Leaks. As a Filler: Holes, Castings, Patterns, Molds, Voids, Wel

1/2 x 4 Mushroom Spike Zinc (25) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/2 x 5 Mushroom Spike Zinc (25) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

3/8 x 2 Mushroom Spike Zinc (25) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/4 x 2 Mushroom Spike 316 SS (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/4 x 1 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

11 1/2-2 1/2-1 Two Grade Sharpening Stone PN: 11 1/2-2 1/2-1 11122121 Two Grade Sharpening Stone Length: 11 1/2 Width: 2 1/2 Height: 1 Some Shelf Wear This is a surplus part it is New but is either missing the box or is from a bulk package.FREE SHIPPING DISCLAIMER : In order to offer Free Shipping as well as faster delivery options eBay #039s technical requirements force us to select a carrier. We reserve the right to change carriers in order to get the best price and options (Applies to free s

3/16 x 3 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

3/16 x 2 Mushroom Spike 316 SS (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

3/8 x 3 1/2 Mushroom Spike Zinc (25) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

1/4 x 3 1/2 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.