Shopping Search

KLV216 - Kim Lighting Micro-flood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Micro-floodFamily: 12 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Housing and Lens Frame: Die-cast, low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance.Reflector: (KLV215) Hydroformed aluminum.Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleBD215BL -Optional Barn DoorsBD215DB - Extruded aluminum, fullyBD215GR - adjustable. Provides beam and glare control.FH215BL - Optional Fixed HoodFH215DB - Formed .062" thick aluminum.Click here to view Options and Accessories application guidelines.

KLV270 - Kim Lighting Ravenna Lowlighter Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Ravenna LowlighterFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 50WProduct Details:Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners, and stainless steel set screw lock for aiming pivot.Aiming: Aimable 358¦ vertically, horizontal aiming controlled by installation on mounting device.Ravenna Yoke: Cast aluminum, stainless steel fasteners and 1/2" NPSM brass nipple mount.Lens: Tempered glass, B" nominal thickness.Gasketing: Silicone gaskets used throughout.Socket: G4 to GY6.35 socket for bipin lamp.Transformer: Remote transformer required. Wiring: 6' No. 18-2 12 volt cable with spade connectors for low voltage cable system connection.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleJBR-2 thru 24 - In-grade J-BoxJBR30 - Staked In-grade Mount SM18 - Stanchion MountColored Lens (Replaces standard clear lens.)Internal Louver - Clips onto rim of MR16 lamp and provides additional brightness control.Click here to view Options and Accessories application guidelines.

KLV216 - Kim Lighting Micro-flood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Micro-floodFamily: 12 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Housing and Lens Frame: Die-cast, low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance.Reflector: (KLV215) Hydroformed aluminum.Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleBD215BL -Optional Barn DoorsBD215DB - Extruded aluminum, fullyBD215GR - adjustable. Provides beam and glare control.FH215BL - Optional Fixed HoodFH215DB - Formed .062" thick aluminum.Click here to view Options and Accessories application guidelines.

KLV270 - Kim Lighting Ravenna Lowlighter Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Ravenna LowlighterFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 50WProduct Details:Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners, and stainless steel set screw lock for aiming pivot.Aiming: Aimable 358¦ vertically, horizontal aiming controlled by installation on mounting device.Ravenna Yoke: Cast aluminum, stainless steel fasteners and 1/2" NPSM brass nipple mount.Lens: Tempered glass, B" nominal thickness.Gasketing: Silicone gaskets used throughout.Socket: G4 to GY6.35 socket for bipin lamp.Transformer: Remote transformer required. Wiring: 6' No. 18-2 12 volt cable with spade connectors for low voltage cable system connection.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleJBR-2 thru 24 - In-grade J-BoxJBR30 - Staked In-grade Mount SM18 - Stanchion MountColored Lens (Replaces standard clear lens.)Internal Louver - Clips onto rim of MR16 lamp and provides additional brightness control.Click here to view Options and Accessories application guidelines.

KLV215 - Kim Lighting Square Hood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Square HoodFamily: 12 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Housing and Lens Frame: Die-cast, low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Reflector: (KLV215) Hydroformed aluminum.Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleBD215BL -Optional Barn DoorsBD215DB - Extruded aluminum, fullyBD215GR - adjustable. Provides beam and glare control.FH215BL - Optional Fixed HoodFH215DB - Formed .062" thick aluminum.Click here to view Options and Accessories application guidelines.

KLV215 - Kim Lighting Square Hood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Square HoodFamily: 12 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Housing and Lens Frame: Die-cast, low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Reflector: (KLV215) Hydroformed aluminum.Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleBD215BL -Optional Barn DoorsBD215DB - Extruded aluminum, fullyBD215GR - adjustable. Provides beam and glare control.FH215BL - Optional Fixed HoodFH215DB - Formed .062" thick aluminum.Click here to view Options and Accessories application guidelines.

EL205 - Kim Lighting Square Hood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Square HoodFamily: 120 Volt LuminairesLamping: 50W PAR20 Halogen / 50W R20 IncandescentWattage: 50W Halogen / 50W IncandescentProduct Details:Housing and Shield: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens: Convex clear tempered glass with silicone gasket.Socket: Porcelain medium base.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Hex Cell Louver Available.Optional Accessories (Sold Separately):EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxJBR32 - Staked In-grade J-BoxSM18 - Stanchion MountColored Lens (Replaces standard clear lens)Internal Louver - Clips onto rim of PAR20 lamp and provides additional brightness control.Click here to view Options and Accessories application guidelines.

EL740 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: PAR38 Incandescent / HalogenWattage: 45W - 150WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

EL720 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: PAR20 HalogenWattage: 35W - 50WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

EL215 - Kim Lighting Micro-flood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Micro-floodFamily: 120 Volt LuminairesLamping: T-3 or T-4 Mini-can HalogenWattage: 50W - 100WProduct Details:Housing and Shield: Die-cast low copper aluminum.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Reflector: Specular Alzak aluminum, peened. Lens: Clear flat tempered glass with silicone gasket.Fasteners: Stainless steel.Socket: Mini-can.Wiring: No. 18 SF rated 200¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Barn Doors, Fixed Hood and Lamps are available.Optional Accessories (Sold Separately):EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxJBR32 - Staked In-grade J-BoxSM18 - Stanchion MountJ-27N - Surface MountJW - Architectural Wall MountClick here to view Options and Accessories application guidelines.

EL150 - Kim Lighting Compact Bollard Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Compact BollardFamily: 120 Volt LuminairesLamping: T-3 or T-4 Bipin HalogenWattage: 20W - 50WProduct Details:Top and Louvers: Interlocking die-cast aluminum sections drawn together with four concealed stainless steel screws. Louver base assembly fastens internally to riser.Riser: 5" diameter extruded aluminum, 1/8" typical wall thickness. Attaches to anchor base with four countersunk stainless steel flat socket head screws.Anchor Base: Concealed cast aluminum. Three 3/8" x 10" + 2" zinc plated anchor bolts.Globe: Diffuse-coated glass, threaded to husk, with neoprene gasket.Socket: G4 to GY6.35 socket for bipin lamp. Transformer: 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed in riser.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.MOUNTING INFORMATION:Bollards are installed with anchor bolts imbedded in a poured in place concrete footing (by others).CAUTION:Concrete footing should be high enough above grade to avoid contact between fixture shaft and soil or standing water.Click here to view Options and Accessories application guidelines.

EL720 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: PAR20 HalogenWattage: 35W - 50WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

EL731 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: 6 Emitters LEDWattage: 6WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

LTV764 - Kim Lighting Minivault In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Series: MinivaultFamily: 120 Volt LuminairesLamping: MR16 Halogen Integral TransformerWattage: 50WProduct Details:Lens Ring: Die-cast brass, natural finish. Five captive 1/4" blackened stainless steel hex-socket cap screws.Lens: Clear tempered soda lime, 3/16" thick, flush with lens ring, slightly crowned.Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.Housing: Heavy wall die-cast brass.Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2" NPT taps in bottom, 12 cu in. volume.Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15¦ vertical adjustment and 340¦ rotation, locking screws, black anodized gimble ring.Transformer: Integral 120 Volt to 12 Volt, 50 watt electronic stepdown transformer Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.With Integral 120/12 TransformerOptional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Internal Louver - clips onto rim of MR16 lamp and provides additional brightness control. Internal Louver - clips onto rim of PAR20 lamp and provides additional brightness control.Half Shield - for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Rock Guard - protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Trim Ring - for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.Click here to view Options and Accessories application guidelines.

LTV766 - Kim Lighting Minivault In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Finish: Natural BrassSeries: MinivaultFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 75WProduct Details:Lens Ring: Die-cast brass, natural finish. Five captive 1/4" blackened stainless steel hex-socket cap screws.Lens: Clear tempered soda lime, 3/10" thick, flush with lens ring, slightly crowned.Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.Housing: Heavy wall die-cast brass.Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15¦ vertical adjustment and 340¦ rotation, locking screws, black anodized gimble ring.Cable: 6' #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixtureNote: Remote transformer required.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Internal Louver - Clips onto rim of MR16 lamp and provides additional brightness control.Half Shield - For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. ( Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No.)Rock Guard - Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring.( Replaces standard lens ring. May be ordered separately.To order assembled with fixture, add to fixture Cat No.)Trim Ring - For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.Click here to view Options and Accessories application guidelines.

KLV201 - Kim Lighting MR16 Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: MR16Family: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 75WProduct Details:Housing: Die-cast low copper aluminum.Compression Ring: Die-cast aluminum threaded to body, with silicone gasket. Black anodized finish.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens: Tempered glass with silicone gasket.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with fork connectors.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Available in standard pack quantities only. Standard pack discount below does not apply.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear Mount (Must be installed in concrete)KLV405 - Surface Mount KLV415 - Extension ModuleColored Lens (Replaces standard clear lens.)Internal Louver - Clips onto rim of MR16 lamp and provides additional brightness control.Prismatic Lens - Prismatic spread lens softens lamp distribution. Best with flood lamps.(Inserts behind lens.)Spread Lens - Linear spread lens creates an oval beam pattern. Best with spot lamps (Inserts behind lens.)Click here to view Options and Accessories application guidelines.

LTV761 - Kim Lighting Minivault In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Series: MinivaultFamily: 120 Volt LuminairesLamping: PAR20 Halogen In-grade mount only.Wattage: 50WProduct Details:Lens Ring: Die-cast brass, natural finish. Five captive 1/4" blackened stainless steel hex-socket cap screws.Lens: Clear tempered soda lime, 3/16" thick, flush with lens ring, slightly crowned.Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.Housing: Heavy wall die-cast brass.Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2" NPT taps in bottom, 12 cu in. volume.Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15¦ vertical adjustment and 340¦ rotation, locking screws, black anodized gimble ring.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Internal Louver - clips onto rim of MR16 lamp and provides additional brightness control. Internal Louver - clips onto rim of PAR20 lamp and provides additional brightness control.Half Shield - for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Rock Guard - protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Trim Ring - for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.Click here to view Options and Accessories application guidelines.

EL730 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: PAR30 HalogenWattage: 50W - 75WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

KLV365 - Kim Lighting Minivault In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: MinivaultFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 75WProduct Details:Lens Ring: Die-cast low copper aluminum. Five captive 1/4" blackened stainless steel hex-socket cap screws.Lens: Clear tempered soda lime, 3/16" thick, flush with lens ring, slightly crowned.Lens Gasket: One piece molded silicone, U-channel wraps completely around lens flange.Housing: Die-cast low copper alloy aluminum.Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing +/-15¦ vertical adjustment and 340¦ rotation, locking screws, black anodized gimble ring.Cable: 6' #18-2 12 Volt cable with fork connector, sealed entry into body with anti-siphon plug.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over an anodized pre-treatment and chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Internal Louver - Clips onto rim of MR16 lamp and provides additional brightness control.Click here to view Options and Accessories application guidelines.

KLV720 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 75WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistanceLens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear MountKLV405 - Surface Mount KLV415 - Extension ModuleColored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Adjustable Glare Shield - Finish to match fixture ( Replaces standard lens ring/hood on fixture.)Click here to view Options and Accessories application guidelines.

EL220 - Kim Lighting Bullet Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: BulletFamily: 120 Volt LuminairesLamping: 150W PAR38 Halogen / 150W R40 IncandescentWattage: 150W Halogen / 150W IncandescentProduct Details:Housing and Shield: Die-cast low copper aluminum.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens: Convex clear or colored tempered glass with clip (optional).Half Shield: Formed .06" thick aluminum fully rotatable (optional)Socket: Porcelain medium base with silicone lamp gasket.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Lens and Clip and Half Shield are available.NOTE: Do not aim down unless protected from direct water spray.Optional Accessories (Sold Separately):Clear Lens and Clip - Required when using R40 lamp aimed up to prevent lamp breakage by thermal shock from water.Colored Lens and Clip (Replaces standard clear lens.)Debris Shield - (Will not work with Half Shield)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxJBR32 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

EL731 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: 6 Emitters LEDWattage: 6WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

KLV400 - Kim Lighting Spear MountAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Spear Mount ()Finish: Black, Dark Bronze, Verde GreenSeries: Spear MountFamily: 12 Volt AccessoriesProduct Details:Die-cast low copper aluminum with 1/2" NPSM fixture mount. Stainless steel set screw locks fixture into mount. Cable slot allows easy fixture mounting before or after installation in ground. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating.Spear Mounting in Concrete In addition to soil mounting, the KLV400 can be installed in a concrete footing for added stability and permanence.Spear MountAccessories are shipped in standard pack quantities only for landscape lighting distribution stock.Click here to view Options and Accessories application guidelines.

C54 - Kim Lighting Well Light In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Finish: Copper and BrassSeries: Well LightFamily: 120 Volt LuminairesLamping: 150W PAR38 Halogen / 150W R40 IncandescentWattage: 150W Halogen / 150W IncandescentProduct Details:Housing: Spun copper, bronze clamping ring, prewired cord through brass seal.Lens: Convex tempered clear glass with silicone gasket.Socket: Porcelain medium base.Well: 9" diameter x 14-3/4" depth direct burial PVC pipe.Louver: Cast aluminum finished black with polished edges, secured to well with socket head set screws.Junction Box: Die-cast brass, 1/2" rigid conduit and brass seal for fixture cord, two 1/2" NPT conduit entries in sides, one 1/2" NPT conduit entry in bottom. 21 cu. in. volume.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.NOTE: Fixture will tilt 15¦ within well. If greater tilt is needed, entire well can be installed at an angle.Optional Accessories (Sold Separately):Directional Louver - 9-1/2" square. Cast aluminum. Replaces standard full louver. Provides glare control and allows maximum light output in direction of fixture tilt (Add to fixture Cat. No.)Tree Grate Louver - 9-1/2" diameter x 1" deep. Gray cast iron. Replaces standard full louver. Fits any tree grate with 9-1/2" diameter x 1" deep opening.Click here to view Options and Accessories application guidelines.

KLV710 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 50WProduct Details:Housing: Die-cast aluminum body and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with spade connectors for low voltage cable system connection.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear MountKLV405 - Surface Mount KLV415 - Extension ModuleColored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Adjustable Glare Shield - Finish to match fixture ( Replaces standard lens ring/hood on fixture.)Click here to view Options and Accessories application guidelines.

EL210 - Kim Lighting Square Hood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Square HoodFamily: 120 Volt LuminairesLamping: PAR38 Incandescent / HalogenWattage: 150WProduct Details:Housing and Shield: Die-cast low copper aluminum.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistanceGasket: Silicone lamp gasket.Socket: Porcelain medium base.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxJBR32 - Staked In-grade J-BoxSM18 - Stanchion MountJ-27N - Surface MountJW - Architectural Wall MountClick here to view Options and Accessories application guidelines.

KLV710 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 12 Volt LuminairesLamping: MR16 Bipin HalogenWattage: 20W - 50WProduct Details:Housing: Die-cast aluminum body and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: G4 to GY6.35 socket for bipin lamp.Wiring: 6' No. 18-2 12 Volt cable with spade connectors for low voltage cable system connection.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Trim Ring, Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available.Note: Remote transformer required.Optional Accessories (Sold Separately):EP17 - PowerPost MountKLV400 - Spear MountKLV405 - Surface Mount KLV415 - Extension ModuleColored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Adjustable Glare Shield - Finish to match fixture ( Replaces standard lens ring/hood on fixture.)Click here to view Options and Accessories application guidelines.

EL210 - Kim Lighting Square Hood Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: Square HoodFamily: 120 Volt LuminairesLamping: PAR38 Incandescent / HalogenWattage: 150WProduct Details:Housing and Shield: Die-cast low copper aluminum.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistanceGasket: Silicone lamp gasket.Socket: Porcelain medium base.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxJBR32 - Staked In-grade J-BoxSM18 - Stanchion MountJ-27N - Surface MountJW - Architectural Wall MountClick here to view Options and Accessories application guidelines.

EL730 - Kim Lighting Scarab Accent LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: Accent Lighting ()Finish: Black, Dark Bronze, Verde GreenSeries: ScarabFamily: 120 Volt LuminairesLamping: PAR30 HalogenWattage: 50W - 75WProduct Details:Housing: Die-cast aluminum body, lamp housing and socket enclosure.Swivel: Die-cast aluminum with locking teeth and 1/2" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless set screw. Clear anodized prior to chromate conversion coating for added corrosion resistance.Lens Frame: Integral die-cast aluminum lens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.Wiring: No. 18AWM rated 105¦C.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a chromate conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)EP17 - PowerPost MountJB1 - Architectural J-BoxJ-25N - Portable Spear MountJBR-2 thru 24 - In-grade J-Box JBR30 - Staked In-grade J-BoxClick here to view Options and Accessories application guidelines.

LTV761 - Kim Lighting Minivault In-grade LightAbove image represents the general form of the fixture. Please refer to product finish and details for exact information.Fixture Type: In-grade Lighting ()Series: MinivaultFamily: 120 Volt LuminairesLamping: PAR20 Halogen In-grade mount only.Wattage: 50WProduct Details:Lens Ring: Die-cast brass, natural finish. Five captive 1/4" blackened stainless steel hex-socket cap screws.Lens: Clear tempered soda lime, 3/16" thick, flush with lens ring, slightly crowned.Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange.Housing: Heavy wall die-cast brass.Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and antisiphonplug, two 1/2" NPT taps in bottom, 12 cu in. volume.Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing +/-15¦ vertical adjustment and 340¦ rotation, locking screws, black anodized gimble ring.Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Fixture manufacturer shall employ a quality program that is certified to meet the ISO 9001:2000 standard.Optional Colored Lens, Hex Cell Louver, Prismatic and Spread Lenses Available. Optional Half Shield and Rock Guard available separate from fixture.Optional Accessories (Sold Separately):Colored Lens (Replaces standard clear lens)Hex Cell Louver - provides additional brightness control. (Inserts behind lens into existing lens gasket.)Prismatic Lens - prismatic spread lens softens lamp distribution. Best with flood lamps. (Inserts behind lens into existing lens gasket.)Spread Lens - linear spread lens creates an oval beam pattern. Best with spot lamps. (Inserts behind lens into existing lens gasket.)Internal Louver - clips onto rim of MR16 lamp and provides additional brightness control. Internal Louver - clips onto rim of PAR20 lamp and provides additional brightness control.Half Shield - for directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Rock Guard - protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. (Replaces standard lens ring. May be ordered separately.)Trim Ring - for flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw.Click here to view Options and Accessories application guidelines.