Shopping Search

No Description

No Description

Stereo 1/8" (3.5mm) Input Four Stereo 1/8" (3.5mm) Outputs with Level controls Operates on a single 9V battery, or optional AC adapter(Not Included) Comes with a single 1/8" to 1/8" adapter cable, and a stereo RCA to 1/8" adapter cable

Ultra-compact monitor headphone amplifier for studio and stage applications Personal 'more me' mixer -- mix a mic and a monitor signal and hear them via headphones Flexible Mic In and Mic Through XLR connectors with Ground Lift switch Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch High-power headphone output on 1/4' and 1/8' jack connectors

The HA04 4-Channel Headphone Amplifier from Live Wire is a single-input headphone amp that provides high-quality audio monitoring for up to four pairs of stereo headphones, with individual volume control. It's the ideal solution for sound reinforcement, studio, choir, and other applications where space is limited.

No Description

Premium headphone amp Machined from a solid block of mahogany High-current output capability Convenient AC operation

THIS LISTING IS FOR AN ASSEMBLED AND TESTED PROJECT SUNRISE WITH RUSSIAN 6N23P TUBE/VALVE, 24V POWER SUPPLY AND HARD CASE! This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. Project Sunrise Version II was designed by headphone enthusiasts Jeremy H (based in the USA) and Frans G (Based in the Netherlands). No need to use a multimeter anymore when rolling tubes! Access from the side of the amp, no removal of top cover - Easy access to bias trimmers. You can use a jewelers screwdriver to dial in the bias through the top cover, no need to remove the cover to set - Access to the 6/12V jumper through the top cover, no need to remove the top - Output impedance selection can now be set from each side of the chassis - Line output for pre-amp use - Revised protection circuit protects your headphones and audio gear - Revised circuitry overall - Comes with gold plated 3.5mm headphone adapter! While Proje

Four channel headphone mixer amplifier providing individual controls for each channel. Ideal for digital-audio-workstations, stage and studios. Dual headphone outputs one rear, plus one front panel output per channel allowing a total of eight headphones connected at the same time. Maximum output power on each channel regardless of different headphone impedances. Left and Right Line inputs for master stereo bus on balanced TRS Tip Ring Sleeve 1/4 phone connectors. Inject input on TRS Tip Ring Sleeve unbalanced stereo phone connector allowing for the insertion of an additional stereo signal that is mixed with the stereo Line input for more me mixing.

The S phone is a versatile single rack space 4-channel headphone amplifier, loaded with advanced features that provide tremendous flexibility for monitor and cue mixing. The Master Input features an input level and LED meter to control and display the overall stereo input.

No Description

Now headphone enthusiasts can utilize the RA1's sonic qualities with a wide selection of headphones. The RA1-HG is designed to drive headphones with impedances of 100 ohms or more.

The compact, flexible HA400 can power up to four pairs of headphones and up to four independent volumes. Let up to four different people in your studio listen to the main mix while recording, while each listener determines their own volume level.

Making key improvements on a already strong amp design we added significant improvements on the ALO Rx amp. Larger higher capacity Dual Li-Ion batteries Illuminated on/off "smart" LED switch, indicating charging and battery status Heavy duty 3.5mm jacks Hi-Lo gain front mounted switch with power to properly drive 600ohm headphones on Hi gain high quality anodized "brushed" aluminum enclosures Improved bass response, slam and audio power Comes with deluxe box, 3 silicone ALO amp straps Equipped with super compact 100v-240V charger, USA plug type prong adapter is not included. Made in the USA Fantastic with IEM earphones as well as 32ohm - 600ohm full size headphones

PyleHome PHE3AW PHE3AW Headphone Amplifier with Bass Boost-White Color Designed for high impendence and low sensitivity headphones with bass boost function. Small and easy to carry and use in the outdoors. Increase your music player s play time. Uses only one AAA battery for 20 hours playtime. Output Power: 70 mW (32 ohms Loaded) 12 mW (300 ohms Loaded). Signal to Noise Ratio: =90 dB (A Weight). Distortion: 0.05% (10 mW). Frequency Response: 10 Hz - 40 kHz.

Experience the highest quality from this ultra-compact, ultra-flexible headphone amplifier system with virtually any pair of headphones, even at maximum volume. It boasts 4 high-power amplifier sections. The phones level control and accurate 6-digit LED output meter per channel make for easy level monitoring. There are 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers. An accurate 6-digit LED main input meter is provided for precise level indication of both line inputs. Dual headphone outputs on each channel allow for connecting 8 headphones at once. A parallel Link Output enables cascading several headphone amplifiers. Our potentiometers and illuminated switches are guarenteed reliable, and our ultra low-noise audio operational amplifiers offer outstanding sound. In addition, all Mini Series models can be stacked together for an ultra-compact signal processing solution!

TASCAM's MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other MH-8s into a system.

Fits in your pocket Headphones are included New vintage stylings Built-in clip Includes echo effect and line out

This portable headphone amplifier also functions as a USB soundcard for your PC. Bypass your PC or Mac’s existing DAC circuit and use the high-quality Wolfson DAC for a cleaner, more accurate sound. This headphone amplifier utilizes Texas Instruments amplifier technology for high performance, good resolution, low distortion, and powerful output. You can use the 3.5mm jack and included short cable to hook up with a conventional digital music player. The built-in EQ has three levels of bass boost. The battery charges automatically when you plug in to a USB port. Built from quality anodized aluminum with a satin finish and includes a rubber case.

The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal

SOFTWARE LIGHTING BUNDLES Authorized Dealer - Full Warranty Rolls HA540 Pure Class A Stereo Headphone Amplifier -BRAND NEW- Description The Bellari HA540 is a audiophile grade headphone amplifier. The all class A signal path ensures smooth clean analog audio. The 0 feedback design means smooth natural analog response. It features 2 input paths and high gain for MP3 players, ipod, etc and a low gain path from audio selectors, mixers, satellite receivers, etc.. It also features direct into the tube grid coupling for no loss or distortion. The unit is included with a universal powersupply for use most anywhere in the world. Features Max overall avaliable gain 35dB (that's a lot!) Bandwidth: 5 - 40K Hz

The music hall mmf 5.1 special edition is a significant upgrade over the standard mmf 5.1. The special edition includes upgrades to the following critical components; vibration damping system, cartridge, and plinth. The mmf 5.1se like the mmf 5.1 is a two speed belt driven audiophile turntable employing music hall s unique dual plinth construction. The distinctive design isolates the key sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Sorbothane orbs separate the two platforms and provide vibration damping. The mmf 5.1se comes complete with cartridge mounted.

Making key improvements on a already strong amp design we added significant improvements on the ALO Rx amp. Larger higher capacity Dual Li-Ion batteries Illuminated on/off "smart" LED switch, indicating charging and battery status Heavy duty 3.5mm jacks Hi-Lo gain front mounted switch with power to properly drive 600ohm headphones on Hi gain high quality anodized "brushed" aluminum enclosures Improved bass response, slam and audio power Comes with deluxe box, 3 silicone ALO amp straps Equipped with super compact 100v-240V charger, USA plug type prong adapter is not included. Made in the USA Fantastic with IEM earphones as well as 32ohm - 600ohm full size headphones

Brand NEW Mini Guitar Pocket Amplifier English Channel fr MP3 Headphone US STOCK (OT806) Description Specifications:Mp3 input jack:3.5mm Earphone input jack:3.5mm Power: AAA battery, 2 pieces(included) Material: ABS Plastic Weight:54g(with the clamshell) Power indicator Dimension:89(L)77(W)26(H)mm Sound Effect : English Channel 100% Brand new in retail package Package included:1x Amplifier 2x AAA battery Shipping Estimated Delivery Time (subjects to stock availability) USA (excl. Alaska, Hawaii

Tascam's MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other Tascam MH-8s into a system.

The HP6 is a 6 channel headphone amplifier that can monitor up to 4 independent stereo sources with the flick of a switch. How many times have you wanted to listen to the mix through a pair of headphones at the same time as someone else but there were none left? Time to get a multi-channel headphone amplifier. All studios require a flexible headphone amplifier to satisfy a multitude of monitoring needs. Sometimes you will need to distribute a stereo signal evenly to 6 sets of headphones. On other occasions, totally different mixes are required on each headphone. How can this be done? Enter the solution.... the HP6. Featuring 6 high powered stereo headphone amplifiers each with independent volume control, the HP6 satisfies all your headphone monitoring needs. In addition, each amplifier can select its source from up to four stereo input signals connected at the rear of the unit.

The new PHA40 from Pyle answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The PHA40 features four headphone outputs on the front panel giving you an extremely powerful monitoring solution at an amazingly low price. Unit includes LED level indicators as well. Use it at the studio, for mixing -- or for simply listening to audio without disturbing others. With the PHA40 you can watch movies, practice with your band, or do any other group activity in solitude.

Authorized Dealer - Full Warranty Rolls RA62C Headphone Amplifier Headphone Amplifier -BRAND NEW- Description The ROLLS RA62c is a six-channel headphone/earphone amplifier for professional audio monitoring. A variety of input options are available including 1/4", RCA, and balanced XLR. FEATURES: * Six Channels of clean, quiet headphone/earphone amplification. * Individual Direct Inputs to mix separate stereo signal with Main Input signals. * 1/4" and 3.5mm Headphone/Earphone Outputs. * LED Clip indication. * Stereo/Mono operation. SPECIFICATIONS: Input Impedance: 10K Ohms unbalanced Max Input Level: +18 dBV Input Connectors: 1/4" TRS stereo, R & L bal. / unbal. 1/4" RCA, R & L balanced XLR 6: 1/4" TRS Direct Input jacks Output Connectors: 12: 1/4" TRS Stereo jacks 6: 1/8" (3.5 mm) TRS Stereo jacks Max Gain: 20 dB/Channel Max Output Power: up to 300 mW/side, 600 mW/Channel ( @ 16 Ohms ) Frequency Response: DC - 30 kHz S/N Ratio: 90 dB THD: <.008% IMD: <.008% Phase Shift (In to Out): 0 deg. Slew Rate: 25 V per

No Description

HA-6AB HEADPHONE/MONITOR AMPLIFIERDescriptionThe HA-6AB Headphone/Monitor Amplifier is a unique combination of a headphone amp and a conventional power amp. This combination of functions can save the expense of an extra power amp in many recording studios. The HA-6AB is basically an economical 20 watt per channel stereo amplifier. Unlike a conventional power amp, however, it has six headphone outputs (stereo phone jacks) on the front panel, each with an associated volume control. When used for overdubbing or rehearsal, this provides more than adequate loudness in all headphones (even older low-impedance models), and allows each musician to set his or her own comfortable volume level. When the overdubbing is complete and the musicians remove their headphones, the HA-6AB can power the tape playback through either (or both) of two sets of studio monitor speakers, selected by pressing front panel pushbuttons. Without the HA-6AB, a separate amp would be needed for the studio speakers. The H