Shopping Search

Multiquip ST3020BCUL Features: -Electric Submersible Clean Water Pump with Single-Phase Motors. -Has built-in thermal overload protection that shuts down the pump when operating temperature rises to unsafe levels. -Ideally suited for 8" casing pipe applications for dewatering coffers and excavations. -UL or CSA approved. -Stainless steel hardware resists corrosion, simplifies service. Specifications: -Item # ST3020BCUL. -Impeller Type: Cast-Ductile-Iron. -Impeller Disc Size: 3". -Total Head: 72'. -Water Capacity: 170 gpm. -Power: 2 HP. -Phase: Single. -Voltage: 230 V. -Starting Amperage: 52 A. -Running Amperage: 10.5 A. -Cable Length: 50'. -Pump Diameter: 6.7". -Overall Height: 28.5". -Weight: 73 lbs.

LINK2311-1 Features: -Power feed 10SM motor conversion kit.-For use with NA series gear head. Includes: -Includes an ArcLink motor retrofit kit used to replace existing motor on NA-3, 4 or 5 wire feed head. Specifications: -Used to convert NA-series wire drives into PF-10S wire drives.

Reversing switch for electric motors, single phase only. Instructions included. Note: We recommend this control only be installed by a qualified technician that understands how electric motors are wired. Motor must have wire leads for connections. If motor only has a terminal board it will be very difficult to wire the switch. This installation would most likely require a skilled electric motor technician.

No Description

No Description

Multiquip ST6125D Features: -Electric Submersible Clean Water Pump with Three-Phase Motors. -In addition to benefits designed for every application. -This heavy duty submersible pump is also extremely quiet and can run for hours unattended. -Designed bolt-on flange fitting for the discharge port. -Multiquip's highest capacity sub pump. -Stainless steel hardware resists corrosion. Specifications: -Item # ST6125D. -Impeller Type: Cast-Ductile-Iron. -Impeller Disc Size: 6". -Discharge Size: 6". -Total Head: 125'. -Water Capacity: 610 gpm. -Power: 15 HP. -Phase: Three. -Voltage: 230/460 V. -Cable Length: 50'. -Pump Diameter: 14.5". -Overall Height: 38.8". -Weight: 325 lbs.

115-230 volts 15.0/7.5 amps 60hz Open Drip Proof - Ball Bearings - Service Factor 1.0 Non-Reversible - CCW Rotation facing the shaft NEMA 56 Frame - Flat Rigid base mount Shaft: 5/8" diameter x 1 7/8", Weight: 28 lbs., Manufacturer: AO Smith

Leeson Farm Duty High Starting Torque, Capacitor Start motor. Overall Length = 11.31" Excellent motor for any application requiring a 3/4hp motor. This Totally Enclosed motor is Excellent for woodworking machines and other industrial machines where the motor is exposed to saw dust, dirt, oil and other partics in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 56 frame, flat base with 4 hos. 3" x 5" mounting. Farm duty motors have many extra features over standard motors such as double sealed bearings with Exxon grease for a temperature range of -20F to +350F. Rubber boot over reset button provides additional protection. Gasketed junction box and capacitor covers. 1 Year Manufacture Warranty.

230 volts 15.0 amps 60hz Open Drip Proof - Ball Bearings - Service Factor 1.0 Non-Reversible - CCW Rotation facing the shaft NEMA 56 Frame - Flat Rigid base mount Shaft: 5/8" diameter x 1 7/8", Weight: 40 lbs., Manufacturer: AO Smith

AO Smith/Century Farm Duty Extra High Starting Torque, Capacitor Start motor. Designed for high starting torque loads (300-400% of full load torque). All parts corrosion resistant. Removable condensate plugs.Excellent motor for any application requiring a 5 hp motor. This Totally Enclosed motor is excellent for woodworking machines, farm equipment and other industrial machines where the motor is exposed to saw dust, dirt, oil and other particles in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 184T frame, flat base with 6 holes, ball bearings. Gasketed junction box and capacitor covers. Manual Overload Protection (red reset button). 1 Year Manufacture Warranty.

115/230 volts 15.0/7.5 amps 60hz Open Drip Proof - Ball Bearings - Service Factor 1.0 Non-Reversible - CCW Rotation facing the shaft NEMA 56 Frame - Flat Rigid base mount Shaft: 5/8" diameter x 1 7/8", Weight: 30 lbs., Manufacturer: AO Smith

230 volts 24.0 amps 60hz Open Drip Proof - Ball Bearings - Service Factor 1.0 Non-Reversible - CCW Rotation facing the shaft Flat Rigid Base Mount - Manual Overload Protection Shaft: 7/8" diameter x 2 1/4", Weight: 63 lbs., Manufacturer: AO Smith

Leeson Farm Duty High Starting Torque, Capacitor Start/Capacitor Run motor. Overall Length = 20.71" Excellent motor for any application requiring a 10 hp motor. This Totally Enclosed motor is Excellent for woodworking machines and other industrial machines where the motor is exposed to saw dust, dirt, oil and other partics in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 215T frame, flat base with 6 hos. Farm duty motors have many extra features over standard motors such as double sealed bearings with Exxon grease for a temperature range of -20F to +350F. Rubber boot over reset button provides additional protection. Gasketed junction box and capacitor covers. 1 Year Manufacture Warranty. Motor weight 144 lbs. SHIPS BY TRUCK - Should ship to business address.

No Description

No Description

INDUSTRIAL ELECTRIC HORIZONTAL UNIT HEATER These units provide space heating in factories, stores, warehouses, public buildings, workshops, or any exposed areas. Easy to install and service. The bottom of the control box hinges for easy access to controls and wiring. Heating element, fan delay control, thermal cutout, motor and fan are easily reached without dismounting the heater. A threaded mounting hole in the top of the heater facilitates the attachment of the heater to a mounting bracket or other mounting assembly. Large, dynamically balanced fan blades provide maximum air flow with minimum turbulence and noise. Totally enclosed motor features permanently lubricated bearings. Effective heat throws of 16' to 38'. Automatic fan delay with thermal cutout. Finished in a gray epoxy paint. Add the optional thermostat for more effiency.

1 Speed; 8-.9 amps, 208-240 Volts Shaft: 1/2" x 3 1/8"; Capacitor Included Rotation CCW Lead End; Motor Diameter = 5" Motor Case Length = 3 3/8" 1 Year Manufacture Warranty, Manufacturer: AO Smith

8.1 amps @ 230 Volts 60 hz. NEMA 145T Frame Keyed Shaft 7/8" Diameter x 2 1/4" TEFC Totally Enclosed Fan Cooled - Service Factor = 1.0; Reversible Manual Overload Protection 1 Year Manufacture Warranty, Weight: 42 lbs., Manufacturer: AO Smith

GENERAL ELECTRIC 5KSP29DK1232AS 1/20 HP 1000 RPM 115V 2.02A 1 PH ------ ROTATION OLD WAREHOUSE SURPLUS SOME SURFACE RUST ON SHAFT (SEE PICTURE) PLEASE NOTE: OFFICE IS CLOSED ON MONDAYS, WE DO SHIP ON SATURDAYS.IF SPECIAL ASSISTANCE IS NEEDED PLEASE CALL MIKE 757-287-9756

AO Smith/Century Farm Duty Extra High Starting Torque, Capacitor Start motor. Designed for high starting torque loads (300-400% of full load torque). All parts corrosion resistant. Removable condensate plugs.Excellent motor for any application requiring a 2 hp motor. This Totally Enclosed motor is excellent for woodworking machines, farm equipment and other industrial machines where the motor is exposed to saw dust, dirt, oil and other particles in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 182TZ frame, flat base with 6 holes, ball bearings. Gasketed junction box and capacitor covers. Manual Overload Protection (red reset button). 1 Year Manufacture Warranty.

No Description

No Description

No Description

AO Smith/Century Farm Duty Extra High Starting Torque, Capacitor Start motor. Designed for high starting torque loads (300-400% of full load torque). All parts corrosion resistant. Removable condensate plugs.Excellent motor for any application requiring a 3 hp motor. This Totally Enclosed motor is excellent for woodworking machines, farm equipment and other industrial machines where the motor is exposed to saw dust, dirt, oil and other particles in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 184T frame, flat base with 6 holes, ball bearings. Gasketed junction box and capacitor covers. Manual Overload Protection (red reset button). 1 Year Manufacture Warranty.

No Description

No Description

No Description

No Description

No Description

No Description