Shopping Search

No Description

CRL "CK" and "DK" Attachment Rollers CRL 'CK' and 'DK' Attachment Rollers are for replacement of old and worn rollers for the Cottage Series Frameless Shower Door Sliders. Sold two per pack. Replacement Rollers for Cottage Series Sliding Shower Doors Catalog Number: DKR78 Also Available in These Catalogs: CRL23 Shower Door and Mirror Hardware Catalog, PAGE J291 CRL83 Master Window and Door Catalog, PAGE W300 Ship Via: Can Ship UPS Shipping Weight: 4 oz (113g) PAYMENT POLICY We accept all forms

Amerec Offers a choice of compact digital controls that are designed for use with AK and 3K steam generators. All digital control kits include a steam head and cables necessary to connect the controls and temperature sensor with the steam generator. KT60, K60 and K30 controls are available in dual control kits so one control can be mounted inside the steam bath and the other outside for user convenience. DK60-K60 Dual 3-button digital system with on/off, temperature setting and time setting up to 60 minutes. Digital displays alternately show room temperature and time remaining on each control. DK60-K60 dual control kit includes a remote sensor. One control to be mounted inside and the other mounted outside the steam room.

Hammerite RustCap is a self-priming, rust preventive coating designed to provide long-lasting metal protection. It provides a decorative finish that resists corrosion and the damaging effects from moisture. It is ideal for interior and exterior applications. The surface must be clean, free of dust, grease, wax, peeling paint, mold and mildew. Scrape off loose paint and rust with a wire brush and sand to a smooth surface. On glossy surfaces, for maximum adhesion, scuff sand the surface thoroughly. Eye protection is recommended. Apply using brush, roller or sprayer. Use in well-ventilated area when temperature is between 60 degrees F and 80 degrees F and humidity is below 60% to ensure proper drying. Mix paint thoroughly before and during application. Always maintain a wet edge, but avoid over-brushing, over-rolling or over-spraying. Apply with a quality synthetic bristle brush or a high quality 1/4''" nap Mohair roller cover. Dries to touch in approximately 90 minutes. Clean all tools, equipment and paint spatters with xylene or lacquer thinner. Aluminum and galvanized surfaces require a prime coat of Hammerite Galvanized and Aluminum Primer. One step and the rust is history, no primer needed. Great for patio furniture, yard ornaments, swing sets, wine rack, lawn mower, tools, lamp post, mailbox, fence, bicycle, toolbox, auto frames and wheels, hardware and much more.

No Description

Chicago Steel Case Key Blank Set of 2 Fits Steel Case Office Furniture and file cabinets You will need to send me your code to know which blank you need, the code determines the blank Code cutting is included Email code before purchase and I will make sure this is the key blank you need or I will point you in the direction of the right one, Thanks Most Chicago blanks are in the store or we can get what you need within a few days Feel free to email before purchase. Payment is expected within 3 d

No Description

Amerec Offers a choice of compact digital controls that are designed for use with AK and 3K steam generators. All digital control kits include a steam head and cables necessary to connect the controls and temperature sensor with the steam generator. KT60, K60 and K30 controls are available in dual control kits so one control can be mounted inside the steam bath and the other outside for user convenience. DK60-K30 Dual digital system with 3-button on/off, temperature setting and time setting up to 60 minutes, plus 1-button on-off controls. K60 display alternately shows room temperature and time remaining. Control kit comes with a remote mounted temperature sensor, allowing either control to be mounted inside and the other to be mounted outside the steam room. DK60-K30 Dual Control Kit includes two controls, sensor, cables and steam head.

Hammerite RustCap is a self-priming, rust preventive coating designed to provide long-lasting metal protection. It provides a decorative finish that resists corrosion and the damaging effects from moisture. It is ideal for interior and exterior applications. The surface must be clean, free of dust, grease, wax, peeling paint, mold and mildew. Scrape off loose paint and rust with a wire brush and sand to a smooth surface. On glossy surfaces, for maximum adhesion, scuff sand the surface thoroughly. Eye protection is recommended. Apply using brush, roller or sprayer. Use in well-ventilated area when temperature is between 60 degrees F and 80 degrees F and humidity is below 60% to ensure proper drying. Mix paint thoroughly before and during application. Always maintain a wet edge, but avoid over-brushing, over-rolling or over-spraying. Apply with a quality synthetic bristle brush or a high quality 1/4''" nap Mohair roller cover. Dries to touch in approximately 90 minutes. Clean all tools, equipment and paint spatters with xylene or lacquer thinner. Aluminum and galvanized surfaces require a prime coat of Hammerite Galvanized and Aluminum Primer. One step and the rust is history, no primer needed. Great for patio furniture, yard ornaments, swing sets, wine rack, lawn mower, tools, lamp post, mailbox, fence, bicycle, toolbox, auto frames and wheels, hardware and much more.

BTG-DK Clear Plastic Designer Thermostat Guard - Fits Thermostats up to: 7" wide x 4" high x 2" deep. Includes solid and ring base. Vented base to allow for optimal performance while limiting unwanted access and elimminate accidental temperature changes. Includes Box, 2 bases, Mounting Hardware, 1 key. Outside dimensions: 8-1/2" W X 5-1/2" X 2-1/2" Maximum Thermostat Size - 7" wide x 4" high x 2" deep . Slim Contemporary Style . Tamper Resistant Design Prevents Unauthorized Adjustment of Thermostat Settings . Strong Durable Clear Plastic Protects Against Damage to Thermostat . For New and Existing Thermostat Applications Applications Offices, Lobbies, Hospitals, Schools, Supermarkets, Restaurants, Convenience Stores (public areas to prevent unauthorized personnel from adjusting temperature). Included: Clear Plastic Guard Cover, Opaque Plastic Ring Base, Opaque Plastic Wallplate, Tumbler Lock 1 Key, Mounting Screws

No Description

Depth Screw Adjustment Assures Each Groove Will be Exactly Alike Built-In Water Tank for Maximum Portability and Dust Elimination Fully Adjustable Counterweight Allows User to Change the Rate of Cut The CRL FP1 Finger Pull Machine is the fastest and easiest way to grind a 5/8 inch (15.9 mm) wide long finger groove in glass. These grooves are actually recessed into the glass to act as handles in sliding glass windows and glass furniture doors. The most common examples would be in showcases in reception areas; two places where the constant opening and closing of sliding windows is needed, but typical handles are not used or desired. The FP1 is precision built. The entire body is welded steel and finished with an enamel paint. Sealed bearings are used throughout the machine to ensure long life from all of the drive components. All parts are carefully machined and balanced to ensure smooth, quiet operation.CRL's FP1 is powered by a 1/2 HP, 1, 725 R.P.M., 115/230 Volt, Single Phase, 60Hz TEFC motor. The unit comes pre-wired with a steel switch and a heavy duty 8-foot power cord with grounded plug. The replaceable abrasive wheel measures 14 x 5/8 inch (355 x 15.9 mm) thick with a 3/4 inch (19 mm) diameter bore. At 47 pounds (21.32 kg) total weight, the CRL FP1 is portable right to the job-site. A rugged all-around machine designed for years of service. One year manufacturer's warranty covers all major components.

No Description

Chicago Steel Case Key Blank Set of 2 Fits Steel Case Office Furniture and file cabinets You will need to send me your code to know which blank you need, the code determines the blank Code cutting is included Email code before purchase and I will make sure this is the key blank you need or I will point you in the direction of the right one, Thanks Most Chicago blanks are in the store or we can get what you need within a few days Feel free to email before purchase. Payment is expected within 3 d

Black PTI 707 Butyl Rubber Sealant Product Details: Non-Skinning, High Quality, Gunnable Sealant Will Not Harden or Lose Flexibility Under Adverse Conditions 40° to 120° F (4° to 49° C) Application Range PTI 707 is a uniquely formulated non-skinning elastomeric sealant with a balance of adhesion-cohesion characteristics that enables it to perform in areas where dynamic conditions exist.

No Description

No Description

All Temperature Gunnability Fast Curing to a Durable, Flexible Seal Excellent Resistance to Ultraviolet, Ozone and Temperature Extremes The CRL Tremco? Proglaze? is a one-part, moisture curing, acetoxy, silicone sealant, easily gunned under all types of weather conditions. It rapidly cures to produce a durable, flexible seal. Proglaze? provides a high performance seal for a wide variety of glazing applications such as cap bead, toe bead, heel bead, butt glazing and metal-to-metal joints. Clear, white aluminum and black are acceptable for indirect contact of edible products under U.S.D.A. requirements for use in federally inspected meat and poultry plants.Technical Data: Conforms to: U.S. Federal Specification TT-S-001543A (COM-NBS) Class A; U.S.

No Description

Voc kit dk bs garg epoxyVOC compliant formula for South Coast of California (SCAQMD)This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coatThe epoxy is fortified with new heavy-duty resin technology to provide superior durabilityIt beautifies and protects with a durable finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tearDo not apply this product over sealed surfacesAllow 60 days minimum for new concrete surfaces to cure before paintingClean and etch new or bare concrete with Bond-Lok cleaner1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile trafficClean up with warm, soapy waterKit contains: Part A and B (1 gallon equivalent), 1 gallon Bond-Lok cleaner, 1 How To DVD, and 1 stir stickGray kit comes with blue/black/white color flakesTan kit comes with tan/brown/white color flakesTintable base kits do not have color flakesRefer to model No. 002.000020C.000 for selection of decorative color flakesTint base formula pages available from ValsparBrand #: Valspar 002.1050027.022UPC: 080047020803Keywords: epoxy concrete paint garage floor voc quikrete kit

Contemporary / Modern 1-1/4" Diameter Mushroom Shaped Cabinet Knob from the DK SeriesA well-adorned kitchen brings comfort to a family making dinner or style to a dinner party with friends. With Hamilton Sinkler s knobs and pulls, you can outfit your kitchen appliances and cabinetry with well-crafted appliance fixtures. The clean lines of the Circle Knob can be used with any of Hamilton Sinkler s knob bases, or alone, to create the look you are striving for in your home. The Bronze Patina and Brushed Nickel finishes will ship within 1-2 business days. All other finishes are special order and will take 4-6 weeks to ship.Welcoming to the touch and pleasing to the eye, the Hamilton Sinkler architectural hardware collections are designed to complement a lifestyle of grace and ease. These collections offer a refined finishing touch to elegant homes and luxury hospitality environments, yet they are far more than mere embellishment. Crafted to last a lifetime, and designed to harmonize with fine furnishings, fabrics and finishes, they become part of the total experience of a home. Hamilton Sinkler: Architectural Hardware for the Thoughtfully Curated Home.Features:Contemporary / Modern DesignBrass or Bronze ConstructionThese Amazing Finishes Coordinate Well with Other Brass or Bronze Accessories from Hamilton Sinkler1-1/4" Diameter1-1/4" Projection

Color-coded hem. Contoured fit. Machine washable. Size Group: X-Large. Lining: Nylon Knit. Coating: Nitrile. Cuff Style: Knit-Wrist. Color: Gray/Black.

ASCO PRESSURE SWITCH SB21DK SEE PICS FOR MORE SPECS CONDITION: NEW - OLD INVENTORY. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD - NO DOA GUARANTEE Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder

For Interior Use Only For LED Power Supplies PT2512 or PT10012 This Power Supply Enclosure Box is made of steel and painted gray. The full size hinged door locks with a quarter turn rotation of the latch. It has plenty of room to accommodate either of the LED Power Supplies Cat No. PT2512 or Cat. No. PT10012. It prevents tampering and protects the Power Supply. For interior use only, waterproof boxes for exterior use are available on special order.

No Description

No Description

Based on the award winning and popular DK-26 keypad programming 6 AA batteries (included) tested to over 100, 000 cycles, two year average battery life Fits in a standard ANSI 2-3/4" backset Weatherproof keypad with true 10 digit functioning Grade 1 lock, "Clutched" and vandal resistant Non-handed, available with PB handle (standard) or AU handle (26D only) 55 users codes, 2 passage codes and 2 lockout codes Request To Exit (REX) input Four attractive architectural finishes available Keyways available: (see chart below) KIL (Key In Lever) format - Sargent LA, Yale, Schlage SC1 IC (Interchangeable Core) format - Best IC Core Prep (cylinder not included) RC (Removeable Core) format - ASSA, Medeco, Sargent, Corbin Russwin, Schlage SI Specification Data Batteries: 6 AA alkaline batteries (included) Operating Temperature: -22 to +158F [-30 to +70C] Shipping Weight: 9 lbs. Warranty: MagnaCare Lifetime Replacement Warranty Finishes: Brushed Chrome (U

No Description

No Description

No Description