Shopping Search

No Description

No Description

No Description

3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.

Pocket Door Frame Kit Pocket Door Set 8 foot tall doors For Doors up to 8' tall and 3' wide. Can be cut down to fit smaller openings. Complete "150 lbs"pocket door frame kit includes: 1 - Universal Header Length 4 - Upright Jamb posts for 8' high Doors 2 - Jamb Posts Floor Brackets 2 - 1125 3 Wheel Hangers 2 - Hanger Mounting Plates w/screws 2 - Hanger Adjusting Bolts 1 - 1550 Door Guide 1 - 1513 Door Stop 24- 5d nails 1 - #10x1 1/4" Screw 2 - #5x5/8" Screw 1 - Installation Instructions for Pocket Frame Set Can be cut down to adjust to your door size Designed for standard 2 x 4 stud walls For Doors 1-3/8" to 1-3/4" Thick For 8' High Doors up to 150 lbs. Up to 36" wide

JUSTRITE FLAMMABLE STORAGE CABINETS Manual-Close Single - 54 Gal. Capacity - 3-Shelf - Sure-Grip EX Handle - Slimline Justrite Slimline flammable safety cabinet offers expanded storage when used next to Justrites standard flammable cabinets and allow separation of incompatible liquids. The narrow fit design of these Slim flammable storage cabinet is ideal for tight spaces. Double walled 18-gauge all-welded steel with 1-1/2" insulating air space helps keep temperatures down. The dual 2" vents of this flammable cabinet can connect to an exhaust system. Safety cabinet has a 2D leak proof doorsill to contain spills. The 350 lb galvanized steel shelves of this flammable liquid cabinet adjusts at 3" increments and feature a SpillSlope design that directs spills to back and bottom of safety cabinet. Doors have full length piano hinges. Justrite Flammable Cabinet has a recessed paddle handle with cylinder lock and padlockable latch for security. Stainless steel 3-point self-latching system provides positive door locking. This safety storage cabinet includes a built in grounding connector. Includes adjustable leveling feet for uneven floors. Durable powder coat finish with Haz-Alert trilingual reflective warning label provides high visibility. Complies with the National Fire Protection Association Flammable Combustible Liquid Code #30 and OSHA standard 1910.106 for flammable storage of 1, 2 and 3 liquids. FM approved. 10 Year Limited Warranty. Manual-Close Single Doors will not close automatically.

No Description

No Description

No Description

No Description

No Description

No Description

Range is from 0-35 Pounds Door Pressure Gauge instrument design specifically to measure force. OPERATING INSTRUCTIONS Set the top (small) o-ring located on the plunger rod on zero, down against the instrument's flange; or set the o-ring on the desired force. Holding the instrument firmly, press slowly against the door at a point approximately handle-high, and 30 inches away from the door's hinges. Read the amount of force required to open the door on the plunger scale closest to the bottom of the small o-ring. MEET ADA REQUIREMENTS The Americans with Disabilities Act requires that both interior and exterior doors of a building be handicapped accessible. Door Opening Force (4.1311 ADAAG). Exterior hinged doors: (Reserved) Interior hinged doors: 5 lbs (22.2N) Sliding or folding doors: 5 lbs (22.2N) Automatic/Power Assisted Doors: (4.13.12) Such doors shall not open to back check faster than 3 seconds and shall require no more than 15 lbs (66.6N) to stop door movement. If a power assisted door is used, its door-opening force shall comply with 4.13.11 and its closing shall conform to the requirements in ANSI A156.19-1984.

Contemporary Design Keyed Lock This CRL Push Button Latch is designed for outswinging wood or metal, screen or storm doors which are one to 1-1/4 inches (25.4 to 31.8 millimeters) thick. It comes complete with a night lock. The tie-down screw at the bottom of the handle adds durability and strength. One inside and outside handle, keyed lock with installation screws per package.

No Description

CRL Black Screen and Storm Door Push Button Latch with Tie Down Screw with 1-3/4" Screw Holes This CRL Push Button Latch is designed for outswinging wood or metal, screen or storm doors which are one to 1-1/4 inches (25.4 to 31.8 millimeters) thick. It comes complete with a night lock. The tie-down screw at the bottom of the handle adds durability and strength. Contemporary Design One handle with installation screws per package. Catalog Number: K5071 Also Available in These Catalogs: CRL83 Master Window and Door Catalog, PAGE W193

No Description

Hallowell Knock-Down Electronic Access Locker Six Tier 3 Wide - 12x18x78 This Electronic Locker is perfect for shared and permanent use. Steel locker is made with a 24 gauge steel body and 18 gauge steel locker doors. Doors are louvered for ventilation and secured using continuous piano hinges. Electronic keypad is user programmable and can be programmed by management for permanent use. Lock is battery operated using 2 AAA batteries (not included) for up to 10, 000 uses. LED indicator lights for low battery, occupied locker and valid data entry. Uses 8-digit master codes and 4-digit user codes for operation. Includes a hidden button for password programming. 6"H legs provide convenient clearance space. Putty finish. Easy assembly. 2 Year Limited Warranty. 79.00 L. 19.00 W. 12.00 H.

Contemporary Design Keyed Lock This Push Button Latch is designed for out swinging wood or metal, screen or storm doors which are one to 1-1/4 inches (25.4 to 31.8 millimeters) thick. It comes complete with a night lock. The tie-down screw at the bottom of the handle adds durability and strength. Color: Black Minimum Order: 1 Package One inside and outside handle with installation screws per package.

No Description

Shed Door T-Handle Lock Set Black 3-1/2" stem For Storage Sheds, Playhouses, chicken coops, any small out door building Set includes: Front T-handle in black, Back "D" handle, 2 keys and screws This listing is for the 3-1/2" stem in black, these handles come in 5 different stem sizes, and in two colors Black or Chrome See Chart Below for the size you would need. If you are not sure what size stem you need, these can be cut down. 3-1/2" stem fits door thickness up to 2" 4-1/2" stem fits door thickness up to 3-1/2" 5-1/2" stem fits door thickness 3-3/4" to 4-1/2" 6" stem fits door thickness 4-3/4" to 5-1/2" 6-3/4" stem fits door thickness 5-1/2" to 6"

C.R. LAURENCE K5071 CRL Black Screen and Storm Door Push Button Latch with Tie Down Screw With 1-3/4" Screw Holes. This CRL Push Button Latch is designed for outswinging wood or metal, screen or storm doors which are one to 1-1/4 inches (25.4 to 31.8 millimeters) thick. It comes complete with a night lock. The tie-down screw at the bottom of the handle adds durability and strength..

PLEASE REFER TO THE ZAP SELECTION GUIDE TO DETERMINE WHAT ZAP OPENER WILL WORK WITH YOUR DOOR 825 Series 3 Super Drive Safety • NEMA 4X compliance for the controller as a standard feature • Compact size reduces potential for lifting injuries during installation • Universal torsion shaft mounting system reduces the potential for unsafe work practices during installation • Fully adjustable automatic obstruction sensing system detects obstructions on any part of the door in the open or close direction while monitoring the entire door movement for unsafe operation or service conditions • Inherent soft start-soft stop, safety stop-reverse eliminates the mechanical stress damage to the door when the door reverses • Self determining limit system prevents thrown cables from debris, ice, and snow left in the door opening Value • Continuous duty rated low voltage motor • Ultra-Quiet DC Motor, will not thermally overload • No extra costs to have controller achieve NEMA 4/IP 66 rating. • Wet location motor cover included • Built in service due reminder may be activated to ensure regular maintenance based on cycles of usage • Fully programmable timer-to-close • Built in interlock terminals to prevent door operation • Programmable mid-stop • Motor maximum amperage draw 2.8 Amps reducing number circuits required for multiple door applications • Automatic obstruction sensing system surpasses the capabilities of a sensing edge detecting obstructions on any part of the door, eliminating the cost of a safety edge and associated wiring • Reduces the occurrence of catastrophic damage to the door Simplicity • Simple one person installation that eliminate steel build ups, back hangs, welding, and specialty anchors • Simplistic maintenance design concept • PCB based system controller eliminates the cost of servicing electrical contactors, limit systems, and countless other parts • When the operator emergency release lever is disengaged the door easily operates by hand • Operates all lifts of sectional doors with counter-weights or torsion springs, including rear mount torsion • Versatile sectional door application mounting. May be mounted vertically, horizontally, upside down, inside the cable drum, rear mount torsion, all without requiring wall or ceiling mount • Simple wiring configurations and accessory modules that eliminate external limit relays to achieve various interlock configurations Reliability • Industrial components ensure years of service • Motor and controller eliminates the problem of stuck motor switches, limit system failures, burned out starting capacitors and A/C motor malfunctions Standard Features • Motor and Controller Continuous duty rated DC Motor with controller, producing a powerful soft start/soft stop output of 650 Newtons of force to drive commercial sectional doors while reducing mechanical impacts that cause premature wear of door components. • NEMA 4X rated controller case ZAP Controllers and push buttons are NEMA 4X compliant as a standard. • Motor Cover A motor cover suitable for wet locations is provided. • Drive Reduction Worm drive gearbox & V-belt reduction drive with floor level, adjustable belt tensioning /emergency release lever. • Wiring Type C2 (factory default), B2 failsafe is standard with the addition of approved photo eye. • Radio Control and External Receiver Terminals Terminal strip provided inside the controller to provide quick, convenient connections for adding external radio control receivers from any desired manufacturer. • Bearings and Belts Drive systems use industrial grade bearings and automotive grade long life v-belts. Our simplistic service design concept allows simple service of components in a matter of moments. • Construction Heavy-duty 8-gauge electro-plate finish steel frame, industrial bearings, worm drive gear box, aluminum drive pulley, secured with key stock and set screw for simple servicing. • Push Button S

3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.

No Description

Resilient non-marring tip provides positive stopping action. Kicks down to hold door open. Holds door open in any position. 4" length.

No Description

No Description

Shop for Doors & Windows at The Home Depot. Revolutionary garage door opener. The Direct Drive is the only one of its kind which offers Europe's leading innovative technology. Unlike conventional garage door opener that use a noisy chain, belt or screw the Direct Drive has only one moving part with no moving chain or belt. The motor glides silently along the stationary chain that is embedded in a sturdy steel rail, creating the quietest garage door opener available. The spring-loaded chain will never sag down. The sensitive internal obstacle detection and the safety sensors constantly monitor every door movement and ensure the highest level of safety. The Direct Drive 3/4 HPS motor provides maximum lifting force. Direct Drive technology requires no maintenance and makes this garage door opener extremely durable and long lasting.

Weatherguard 538-3 Specifications: Height: 24" Width: 24-1/4" Length: 36-5/8" Cubic Feet: 12 Fits: Flatbed platform or dump truck bodies Door Opening: Measures 19.5"H x 32.5"W Features: Rotary style two position latch system Weatherguard 538-3 Features: Brushed stainless steel paddle handle with rotary style latch mechanism features a two position latch that prevents the door from inadvertently opening. Aluminum doors swing down for easy access and a full view of the contents. Opened door is supported by aircraft-type cables with swedged fittings which can be removed to allow for a fully open swing down position. Positive weather seal protects tools and materials stored inside from road dirt and weather.