Tools and Accessories

PORT-A-COOL174; EVAPORATIVE COOLERS Replacement Part 16 HP Pump for Evaporative Coolers Replace old, worn out parts and accessories to your evaporative cooler. Installs in 24, 36" and 48" Evaporative Coolers. Pumps water out from internal water reservoir and disperses into media filter for cooler air environments.

Featuring a 1-3/4 max HP (11 Amp, 24, 000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts. The BodyGrip design is a comfortable over-molded rubber grip wrapped around the base with an ad Available at The Home Depot. Tools and Hardware

Marley 24HDHI Leading Edge Extra Heavy Duty Air Circulator 24" Diameter 1/2 HP Head & I-Beam Mount Fan Features and Specifications Ideally Suited For Use In Large, Non-Air Conditioned Facilities, Which Require General Air Circulation, Providing Spot Cooling Where Long Aisles And Production Lines Exist. 1/2 HP, 2-Speed, 120 Volt, Totally Enclosed, Thermally Protected, PSC Motor With Permanently Lubricated Ball Bearings. Heavy Duty Pull Chain Switch 12′ Long 3 Conductor SJT Type Cord Coated Steel Blades Double Locking Powder Coat Finish, Vinyl Coated Guard UL Listed/5 Year Limited Warranty /CUL Approved Assembled Head Uni-Pack Blade Length: 24" Volts : 120 Phase: Single HP: 1/2 Amps: 8.1 CFM: 7300/5500

This fixed-base router from DeWalt has all the design features to make it a popular choice with woodworkers and professional carpenters. The tool's powerhouse is a smooth-running, 11 amp, 1-3/4-horsepower motor that offers more than enough power to make precise, clean cuts in tough hardwoods without bogging down. A micro-fine adjustment ring is used to adjust the depth of cut in 1/64-inch increments, so the motor itself doesn't need to be turned, and as a consequence, the position of the switch and cord doesn't change every time your cut-depth does. This same motor can be used with DeWalt's DW6182 plunge base or their DW6183 D-handle base, and DeWalt has thoughtfully made motor removal and base changing a quick and easy, tool-free operation. Both the motor housing and the base are made of precision-machined aluminum for durability, and the motor housing has nickel plating to ensure smooth depth adjustments. Available at The Home Depot.

Hook Plates enable any fork truck to safely lift a load using chains, cables or slings. Features slanted fork openings measuring 6-1/4" wide by 1-3/4" high to prevent the hook plate from being used upside down. A hook with anchor shackle is included.

68J24 Motor 1/3 HP, 1 Phase, 208/230V This is a Genuine Lennox OEM Part 1/3 HP Condenser fan motor, 1075 RPM, 208/230 Volt, 60 Hertz, 1 Phase, Frame 48Y Shaft Diamater: 1/2" Shaft Length: 2.75"

Product Features: Tools and Accessory Type: Power Tools

EMAX 5-HP 80-Gallon Two-Stage Air Compressor (208/230V 1-Phase) - EP05V080I1 - Piston Series Two-Stage Cast Iron Pump Dual control design allows for automatic or co...

The 5615-21 includes BodyGrip Router, carrying case with integral RouterStation, two 1-1/8 in. collet wrenches, 1/4 in. collet, 1/2 in. collet, and operator's manual. Exclusive BodyGrip Design. 1-3/4 Max HP, 11 Amp, 24, 000 RPM Milwaukee Motor. Exclusive Linear Depth Adjustment System. Impact-resistant carrying case with integral RouterStation.

No Description

Band Saw, 15 X 24 In., Motor Voltage 220, 5 Hp, 30 Amps Ac, 60 Hz, 3 Phase, Number Of Speeds Variable, Speeds (fpm) 65 To 278, Cutting Capacity Round (in.) 18, Cutting Capacity Rectangle (in.) 15 X 24, Cutting Capacity Square (in.) 18, Cutting Angle (deg.) 0 - 60, Miter Capacity (deg.) 60, Max. Blade Length (in.) 209-21/25, Min. Blade Length (in.) 209-21/25, Max. Blade Width (in.) 1-1/2, Min. Blade Width (in.) 1-1/2, Blade Thickness (in.) .051, Overall Height (in.) 17, Overall Width (in.) 45

ebay template General Purpose Motor, 1/3HP, 1800RPM, 24V, RS56C Frame (Leeson) Item will only include what is explicitly stated in the detail description below. Please do not assume accessories listed in the manufacturer description will be included if they are not stated as being apart of this specific auction. If you have any question please contact us. Item Condition Brand new (Item never been used) Item Functionality Brand New (Item never been used) Packaging Original packaging

No Description

Kawasaki Vertical 24 HP V-Twin OHV Engine 1" x 3-5/32" #FR691-S04 MSRP:$1, 495.00 Price:$975.00 You Save:$520.00 (35 %)Item Number:FR691-S04 Manufacturer:Kawasaki Item Condition:BRAND NEW FR Series FOR DECADES, PROFESSIONALS HAVE KNOWN THE VALUE OF HAVING A KAWASAKI ENGINE IN THEIR EQUIPMENT. NOW HOMEOWNERS CAN ENJOY THE SAME KAWASAKI POWER IN THEIR MOWERS. INTRODUCING THE ALL-NEW FR SERIES ENGINES FEATURING FOUR-CYCLE V-TWIN POWERPLANTS WHICH RANGE IN SIZE FROM 22HP TO 26HP. THEY DELIVER SMOOTH

Honda GX240 (240cc) OHV commercial engine with electronic ignition system, low oil alert system Premium alternator with Automatic Voltage Regulation (AVR) and Full-Time, Max Power Output (120v and/or 240v) Full generator GFCI protection Extra-large, metal gas tank (7.5g) with up to 60% more capacity Dedicated, branch-rated (UL 489) circuit protection 8HP 4300W Heavy Duty Generator - 4943-24 Lift Hook (Folding) Wheel Kit Engine Oil.

No Description

24 2 SPEED 1/2HP INDUSTRIAL FAN HEAD"

Grinder Package, Simplex, 2 Hp, Switch Type Tether, Voltage 230, Amps 13.9, Height 48 In., Dia. 24 In., Discharge Npt 1 1/4 In., Shaft Seal Carbon/ceramic, Off Point (in.) 9, On Point 25 In., Max. Head 130 Ft., Max. Temp. 140 F, Phase 1, Cord Length 20 Ft., Standards Ul/csa, Includes Basin, Cover, Check Valve, Discharge Pipe

POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve Conveyors transport products of various sizes and shapes while maintaining proper product orientation. Durable black PVC belt is used in light duty package handling industries, as well as rough, abrasive environments. 10 gauge rolled, welded, and painted steel frame and slider bed. Standard 60 ( 5) FPM non-reversing conveying speed (measured at centerline radius). Includes permanent leg supports for 34" to 38" conveying surface height. Tapered and lagged drive and tail pulleys. Sealed and pre-lubricated mounted bearings. Totally enclosed 115/230V, 60Hz single phase motor with 10 ft. power cord and on/off switch for 115V use. Drive Motor is located at discharge (exit) end to pull product through curve. Optional Variable Speed Motor is available offering 12 to 60 ( 5) FPM. Other outside radii, belt widths and voltages are available; call for information. Note: Left Hand (Counter Clockwise) curve. Right Hand (Clockwise) curve is also available using curve suffix (R) Right Hand.

Shop Fox W1701 13, 200 RPM 24-1/4" x 19" 1 HP Shaper W1701 - 1 HP Shaper Instruction Manual This 1 HP Shaper provides the best of all worlds - a rock solid router table, which allows the use of most 1/4" and 1/2" shank router bits, as well as a powerful shaper, which opens up a new realm of 1/2" bore shaper cutters (see page 205-206). A split adjustment fence also makes edge jointing and full edge profiling safe and easy. This Shaper should be a part of every woodshop. Motor: 1 HP, 110V, 3450 RPM, reversible Spindle Speed 13, 200 RPM Spindle travel: 7/8" Table height: 34-1/4" Heavy-duty miter gauge Table bore: 3" with 1-7/8" and 1-3/8" inserts Powder coated paint and all ball bearing construction Spindle: 1/2" diameter x 3", 2-1/2" maximum cutter height Router bit spindles: accepts 1/4" and 1/2" Cutterhead diameter: 2" Large precision ground cast iron table Table size: 24-1/4" wide x 19" deep with 3/4" miter slot Includes 5 spindle bushings for adjusting cutter spacing Maximum cutter diameter: 2-7/8" Footprint:

Product Features: Tools and Accessory Type: Power Tools

Marley 24HDHP Leading Edge Extra Heavy Duty Air Circulator 24" Diameter 1/2 HP Head & Pedestal Fan Features and Specifications Ideally Suited For Use In Large, Non-Air Conditioned Facilities, Which Require General Air Circulation, Providing Spot Cooling Where Long Aisles And Production Lines Exist. 1/2 HP, 2-Speed, 120 Volt, Totally Enclosed, Thermally Protected, PSC Motor With Permanently Lubricated Ball Bearings. Heavy Duty Pull Chain Switch 12′ Long 3 Conductor SJT Type Cord Coated Steel Blades Double Locking Powder Coat Finish, Vinyl Coated Guard Fan Head Tilt - Pedestal: 10° Down and 28° Up Column Adjustment: 48-7/8" - 60" 27" Diameter Steel Dome Pedestal Base Column/Base Connection: 5 Carriage Bolts UL Listed/5 Year Limited Warranty /CUL Approved Assembled Head Uni-Pack Blade Length: 24" Volts : 120 Phase: Single HP: 1/2 Amps: 8.1 CFM: 7300/5500

The MK Diamond MK-5005G Series of gas motor / 9 HP. Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required. Self-leveling blade guard provides optimum blade coverage for operator safety. Open-back design allows for material up to 20" long to be cut. Conveyor cart built from heavy-duty cast aluminum. Adjustable water supply for maximum blade protection. Built-in tie-downs for safer saw transport. Ergonomically designed handle for reduced operator fatigue. Engine attachment is via four vibration isolation mounts. Belt driven, self-priming centrifugal water pumps can be disengaged for dry cutting. Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw.

Hook Plates enable any fork truck to safely lift a load using chains, cables or slings. Features slanted fork openings measuring 6-1/4" wide by 1-3/4" high to prevent the hook plate from being used upside down. A hook with anchor shackle is included. 6000 pounds capacity for handling heavier loads.

POWERED BELT CURVE CONVEYOR Powered Turn Belt Curve Conveyors transport products of various sizes and shapes while maintaining proper product orientation. Durable black PVC belt is used in light duty package handling industries, as well as rough, abrasive environments. 10 gauge rolled, welded, and painted steel frame and slider bed. Standard 60 ( 5) FPM non-reversing conveying speed (measured at centerline radius). Includes permanent leg supports for 34" to 38" conveying surface height. Tapered and lagged drive and tail pulleys. Sealed and pre-lubricated mounted bearings. Totally enclosed 115/230V, 60Hz single phase motor with 10 ft. power cord and on/off switch for 115V use. Drive Motor is located at discharge (exit) end to pull product through curve. Optional Variable Speed Motor is available offering 12 to 60 ( 5) FPM. Other outside radii, belt widths and voltages are available; call for information. Note: Right Hand (Clockwise) curve. Left Hand (Counter Clockwise) curve is also available using curve suffix (L) Left Hand.

This filter press was installed in 1996, but it was never used! It has been installed in a water treatment facility for 16 years without ever operating. The process it was built for was changed before it was put into use. If you need a filter press of this size, don't hesitate! This press is removed and ready to be put into service. It includes the press, elevated walkway, manuals, and controls. Save thousands and buy used from Global Industrial, LLC today! FOB: Belgium, WI USA Specifications:

The Powermatic 1791259 / 2415-1 is a 24 Woodworking Band Saw. This saw has powerful totally enclosed, fan cooled motors to keep out dust for a longer life and maximum performance. Extra large cast iron tables for more work area in front of the blade. The tables tilt 45° to the right and 15° to the left and come standard with a T-slot mitre gauge. Saw blade is completely guarded but easily accessible for changing. The cast iron drive wheels are balanced and equipped with vulcanized rubber tires. It has lower wheel brush to eliminate sawdust buildup and convenient foot brake for rapid stops.

Hook Plates enable any fork truck to safely lift a load using chains, cables or slings. Features slanted fork openings measuring 6-1/4" wide by 1-3/4" high to prevent the hook plate from being used upside down. A hook with anchor shackle is included.

Marley 24HDH 24" 1/2 HP Extra Heavy Duty Air Circulator Fan Head Only Features and Specification The Factory Fan Ideally Suited For Use In Large, Non-Air Conditioned Facilities, Which Require General Air Circulation, Providing Spot Cooling Where Long Aisles And Production Lines Exist 1/2 HP, 2-Speed, 120 Volt, Totally Enclosed, Thermally Protected, Psc Motor With Permanently Lubricated Ball Bearings Heavy Duty Pull Chain Switch 12′ Long 3 Conductor SJT Type Cord Coated Steel Blades Vinyl Coated Guard Fan Head Tilt - Pedestal: 10° Down And 28° Up; Wall Mount: 40° Down Or 0° Up Meets OSHA Standards / UL Listed / 5 Year Limited Warranty Blade Length: 24" Max Amps: 8.1 CFM (High): 7300 CFM (Low): 5500

Permanent Magnet Dc Totally Enclosed Non-ventilated Motor, Hp 1/2, Rpm 1800, Armature Dc Voltage 24 Vdc, Nema Frame 56c, Mounting Face/base, Service Factor 1.00, Bearings Ball, Full Load Amps At Nameplate Volts 20.0, Thermal Protection None