Tools and Accessories

1-8 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

442-82480 Thread Sealants This item features: -Tough, pliable sealant specially formulated for heating, air conditioning, and refrigeration applications. -Sets up quickly to allow immediate assembly and to keep joints tight in areas of high vibration and thermal cycling. -Seals oils, refrigerants, butane, propane, natural gas, and more. -Easy cleanup. -Packing Type: Can. -Color: Blue. -Pressure: 5000.00 psi [Max]. -Viscosity: 20000.0 cP [Min], 30000.0 cP [Max]. -Temp. Range: -65.0 F [Min], 400.0 F [Max]. -Chemical Compound: Acrylic. -Applicable Materials: Copper, Aluminum, Brass, Iron, Stainless Steel, Most Metals. -Curing Method: Anaerobic. -Resistance: 1, 1, 1, Trichloroethane, Acid, Ammonia, Antifreeze, Brake Fluid, Freon, Mineral Spirits, Moisture, Motor Oil, Oil, Saltwater, Transmission Fluid, Water, Glycerine, Butane, Propane, Pentane, VM&P Naptha, Diesel Fuel, Alkali. -Physical Form: Paste or Gel. -Price is for 1 Can. Testing and approvals: -CFIA. Material safety data sheets and specs: 82480 H.V.A.C. Blue Pipe Joint Compound.pdf 82481 HVAC Blue Pipe Joint Compound.pdf Unit Sold is in measure of 1 Can

This auction is for: 1 pc A393.09 7/32 C4 Collet Sandvik 1 Pc W e have a Large selection of Industrial Tooling like Carbide Inserts, Drills, End Mills, Taps, Tool Holders with new shipments in every week, Check Back Often or Contact us at InnovativeTooling@hotmail.com Thanks For Looking! Payment We currently accept PayPal.We can also make arrangements if PayPal is not an option.Please contact us to do so. Shipping If you are buying more than 1 item we will combine the shipping charges. We recom

Roller Chain Link, A-1 Attachment, Ansi Chain Size C2052, Pitch 1.250 In, Roller Dia 0.750 In, Roller Bushing Width 0.375 In, Overall Width 0.878 In, Pin Link Plate Thickness 0.080 In, Roller Link Plate Height 0.591 In, Inside Pin Dia 0.200 In, Outside Pin Dia 0.200 In, Pin Length 0.875 In, Rivet End To Center Line 0.406 In, Connecting End To Cl 0.469 In, Tensile Strength 6170 Lb, Max Allowable Load 970 Lb, Length 1.250 In, Temp Range 14f - 140f, Carbon Steel Material

1 1/8-7 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

No Description

VALENITE BID IS FOR 1 INSERT VCMT 32.52-1A VN8 Manufacturer: VALENITE Grade name: VN8 Insert material: CARBIDE - CVD COATED ISO range: P10-30 M20-30 K10-30 ANSI range: C2-C3 C5-C7 Coating: TiN-based multilayer Description: 'For: Cast iron, steels, 300 and 400 series stainless steels, PH stainless steels' - 'A very well balanced TiN coated grade suitable for a broad range of applications. Has outstanding crater and impact resistance at low to high speeds.'

VALENITE BID IS FOR 1 INSERT CCMT 32.51 -1A VN8 Manufacturer: VALENITE Grade name: VN8 Insert material: CARBIDE - CVD COATED ISO range: P10-30 M20-30 K10-30 ANSI range: C2-C3 C5-C7 Coating: TiN-based multilayer Description: 'For: Cast iron, steels, 300 and 400 series stainless steels, PH stainless steels' - 'A very well balanced TiN coated grade suitable for a broad range of applications. Has outstanding crater and impact resistance at low to high speeds.' Powered by eBay Turbo Lister The free

1-8 Finished Hex Nut SS 316 (A4) - Finished Hex Nuts in 316 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 316 stainless steel differs from 18-8 by it's molybdenum content (2-3%) and a higher nickel content (10-14%). This gives 316 stainless steel a higher degree of corrosion resistance and superior strength at raised temperatures. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

1/4-20 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

1/2-13 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

SquareTrade © AP6.0 Frosty-Freeze A/C Products Company Special Hose Adapter R134a x R12 Length: 6" Other lengths available, please ask. (1) ONE 6" Hose! Color: Yellow Other colors available, please ask. **1/2" ACME-16 Threads Per Inch (R134a) Female Swivel x 1/4"Flare Female Swivel. **The ends on the hose do not have valve core depressors. **Specially formulated rubber tube resists most refrigerants and assures long work life. PLEASE VISIT OUR eBay STORE FOR MORE BEVERAGE, REFRIGERATION, AIR-C

1-14 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

1/2-20 Finished Hex Nut SS 18-8 (A2) - Finished Hex Nuts in 18-8 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 18-8 nuts are made from one of the following austenitic alloys: 303, 303SE, 304, XM7, all of which are characterized as having a chromium content of 18% and nickel content of 8-10%. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.

1/4-20 Finished Hex Nut SS 316 (A4) - Finished Hex Nuts in 316 stainless steel are designed for use with stainless steel bolts or screws with a specified minimum tensile strength equal or less than the specified proof stress of the mating nut. 316 stainless steel differs from 18-8 by it's molybdenum content (2-3%) and a higher nickel content (10-14%). This gives 316 stainless steel a higher degree of corrosion resistance and superior strength at raised temperatures. Hardness of Rockwell B95 - C32 for diameters 1/4 through 5/8. Rockwell B80 - C32 for diameters of 3/4 through 1 inch. Proof load of 100, 000 psi for diameters 1/4 through 5/8 and 85, 000 psi for diameters 3/4 through 1 inch.