Dishwasher Accessories

Hatco PMG-100 Powermite Booster Heater, gas, 5 gal storage cap., blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, s/s tank & front, painted body & legs, 105, 000 BTU

Thanks to its powerful, 105, 000 BTU heating system and ample 5 gallon tank, this Hatco PMG-100 Powermite booster heater provides all of the hot final rinse water you need to properly sanitize and flash-dry dishes and flatware. The Hatco PMG-100 Powermite booster heater is designed for use with 2 tank conveyor dishwashers. Its innovative burner system uses both primary and secondary air for consistent ignition every time. The Hatco PMG-100 Powermite booster heater is UL Listed. Choose fuel type. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 27 1/2"W x 20 3/4"D x 31"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 241 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 138 GPH PMG-100 From Hatco

Hatco PMG-200 Powermite Booster Heater, gas, 5 gal storage cap., blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, s/s tank & front, painted body & legs, 195, 000 BTU

Thanks to its powerful, 195, 000 BTU heating system and ample 5 gallon tank, this Hatco PMG-200 Powermite booster heater provides all of the hot final rinse water you need to properly sanitize and flash-dry dishes and flatware. The Hatco PMG-200 Powermite booster heater is designed for use with large, industrial sized conveyor dishwashers. Its innovative burner system uses both primary and secondary air for consistent ignition every time. The Hatco PMG-200 Powermite booster heater is UL Listed. Choose fuel type. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 36"W x 20 3/4"D x 31"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 452 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 258 GPH PMG-200-120-QS From Hatco

The Hobart SR24H hot water sanitizing dishwasher?s compact, economical design is perfect for small restaurants, coffee shops, quick service restaurants, bars, small health care facilities, and convenience stores. It uses just 2.4 gallons of water per rack and can handle up to 14 racks per hour. With a 16 gauge stainless steel tank bottom and 18 gauge stainless steel base, chamber, and door, this chemical sanitizing dishwasher is built for years of service. Revolving upper and lower anti-clogging wash/rinse arms, a removable stainless steel scrap screen, and a corrosion resistant pump also make this undercounter dishwasher ideal for your low-volume establishment. Choose electrical configuration. Includes a 7 kw booster heater. NSF and UL Listed. Please consult the Specification Sheet for additional information.

CMA E-C-EXT Extended-Door Single Rack Low Temperature, Chemical Sanitizing Corner Dishwasher The CMA E-C-EXT extended-door, low temperature, chemical sanitizing single rack corner dishwasher offers a reenoption for commercial dishwashing, using only .93 gallons of water per cycle. It Energy Star Qualified, and conveniently meets all ETL, UL and CUL sanitation and construction standards without the need for booster or tank heaters.br /br / With a 90-second wash cycle, the CMA E-C-EXT extended-do

Hatco PMG-60 Powermite Booster Heater, gas, 3.2 gal storage cap., blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, s/s tank & front, painted body & legs, 58, 000 BTU

Disposer, with sink/trough mount assembly, 5 HP motor, aluminum housings, no feet, auto reverse with start/stop push button, includes 3-1/2 " sink collar with stopper, vacuum breaker, solenoid with flow control and fixed nozzle, energy/water saving switch, heat treated aluminum alloy housing. 6-1/2" sink collar with sink stopper available at no additonal cost - contact customer service to order. ( Salvajor - 500-SA-ARSS 4603 )

CMA E-AH-EXT Extended-Door Single Rack Low Temperature, Chemical Sanitizing Straight Dishwasher The CMA E-AH-EXT extended-door, low temperature, chemical sanitizing single rack straight dishwasher offers a reenoption for commercial dishwashing, using only .93 gallons of water per cycle. It Energy Star Qualified, and conveniently meets all ETL, UL and CUL sanitation and construction standards without the need for booster or tank heaters. With a 90-second wash cycle, the CMA E-AH-EXT extended-doo

Disposer, with sink/trough mount assembly, 5 HP motor, aluminum housings, no feet, auto reverse with start/stop push button, includes 3-1/2 " sink collar with stopper, vacuum breaker, solenoid with flow control and fixed nozzle, energy/water saving switch, heat treated aluminum alloy housing. 6-1/2" sink collar with sink stopper available at no additonal cost - contact customer service to order. ( Salvajor - 500-SA-ARSS 2083 )

Disposer, with sink/trough mount assembly, 5 hp motor, start/stop push button automatic reversing and water-saving ARSS control, includes fixed nozzle, vacuum breaker, solenoid valve, scrap ring and flow control, heat treated aluminum alloy housing

Disposer, with cone assembly, 3 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 300-CA-ARSS 2303 )

Thanks to its powerful, 195, 000 BTU heating system and ample 5 gallon tank, this Hatco PMG-200 Powermite booster heater provides all of the hot final rinse water you need to properly sanitize and flash-dry dishes and flatware. The Hatco PMG-200 Powermite booster heater is designed for use with large, industrial sized conveyor dishwashers. Its innovative burner system uses both primary and secondary air for consistent ignition every time. The Hatco PMG-200 Powermite booster heater is UL Listed. Choose fuel type. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 36"W x 20 3/4"D x 31"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 452 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 258 GPH PMG-200LP From Hatco

Disposer, with 12" Cone assembly, 5 hp motor, start/stop push button automatic reversing and water-saving ARSS control, includes fixed nozzle, vacuum breaker, solenoid valve, scrap ring and flow control, heat treated aluminum alloy housing

Disposer, with sink/trough mount assembly, 5 HP motor, aluminum housings, no feet, auto reverse with start/stop push button, includes 3-1/2 " sink collar with stopper, vacuum breaker, solenoid with flow control and fixed nozzle, energy/water saving switch, heat treated aluminum alloy housing. 6-1/2" sink collar with sink stopper available at no additonal cost - contact customer service to order. ( Salvajor - 500-SA-ARSS 2303 )

Disposer, with cone assembly, 5 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 500-CA-ARSS 4603 )

Thanks to its powerful, 105, 000 BTU heating system and ample 5 gallon tank, this Hatco PMG-100 Powermite booster heater provides all of the hot final rinse water you need to properly sanitize and flash-dry dishes and flatware. The Hatco PMG-100 Powermite booster heater is designed for use with 2 tank conveyor dishwashers. Its innovative burner system uses both primary and secondary air for consistent ignition every time. The Hatco PMG-100 Powermite booster heater is UL Listed. Choose fuel type. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 27 1/2"W x 20 3/4"D x 31"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 241 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 138 GPH 042-PMG100NG From Hatco

Disposer, with cone assembly, 3 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 300-CA-ARSS 4603 )

Disposer, with cone assembly, 3 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 300-CA-ARSS 2083 )

Disposer, with cone assembly, 5 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 500-CA-ARSS 2303 )

Disposer, with cone assembly, 5 HP motor, aluminum housings, no feet, auto reversing with start/stop push button, energy/water saving switch, includes cone, rubber scrap ring, vacuum breaker, solenoid with flow control and fixed nozzle, heat treated aluminum alloy housing. 15" and 18" cones available at no additional cost - contact customer service to order. ( Salvajor - 500-CA-ARSS 2083 )