Bosch PS10-2A I-Driver Prices

12V Max Cordless Lithium-Ion I-Driver - PS10-2A. (2) 12V Max Lithium-Ion Batteries - BAT411A. 30-Minute Charger - BC430. (2) 1.5-in Power Drive Bits. Carrying Case

With its ultra compact design, the Bosch PS10-2A 12-Volt Max Lithium-Ion Impact Driver Kit is a valuable complement to your high voltage tools. Offering big power, a small package, long lasting, efficient performance, optimum comfort, and reliable control, this driver kit comes with a storage bag and two rechargeable Litheon batteries.

Cordless Screwdriver Kit, Volts 12.0 Vdc, Drill Speed 0 To 600 Rpm, Max Torque 80 In-lb, 90 Degree Articulating Head, Clutch Style 7+1 Electronic, Chuck Size 1/4 In, Battery Pack Replacement 1ztb1 Lithium Ion, Handle Type Straight Anti Slip Comfort Grip, Bearings Ball/roller, Tool Length 10 In, Tool Weight 2.2 Lb, Includes (2) 1 1/2 In Power Drive Bits, 120 Volt 30 Minute Charger, 2 Litheon(tm) Battery, Carrying Case

2611-7697 Features: -Cordless Drill.-The ultra compact head is just 3.5'' total head length allowing the I-Driver to fit where traditional drills, even right angle drills, cannot go.-90 articulating head with five position locks helps the user get to hard to reach spots with ease.-80 inches per pound of torque gives you the power you need for driving screws.-The Litheon advanced lithium ion battery drives one hundred 3'' screws per charge.-Revolutionary variable speed trigger design provides increased sensitivity and control.-Reversible drive allows the pocket driver to be equally useful at driving or removing screws.-Seven setting electronic clutch enables precision driving and eliminates over torque in soft base materials.-The drill mode allows pilot and other small bore holes. Dimensions: -Built -in quick change chuck allows quick change between bits while preventing bit loss, simply pull to insert or release 1/4'' hex shank bits.

12 Volt PS10-2A Max Litheon I-Driver PS10-2A Find a wide variety of Great Deals at drugstore.com, where you get 5% back and free shipping!

12V Max Cordless Lithium-Ion I-Driver - PS10-2A. (2) 12V Max Lithium-Ion Batteries - BAT411A. 30-Minute Charger - BC430. (2) 1.5-in Power Drive Bits. Carrying Case & 12V Max Cordless Lithium-Ion I-Driver - PS10-2A. (2) 12V Max Lithium-Ion Batteries - BAT411A. 30-Minute Charger - BC430. (2) 1.5-in Power Drive Bits. Carrying Case

Shop at The Home Depot. The Bosch PS10-2A is a 12v i-driver with 2 batteries. The ultra-compact head on the PS10-2A is just 3.5 inch in length allowing the i-driver to fit where traditional drills, even right angle drills, cant possibly go. The Bosch ps10-2a features a 90Â articulating head with five position locks helping the user access hard to reach spots with relative ease. The ps10-2as 80 in-lbs of torque provides more than enough power needed for driving screws. The litheon advanced lithium ion battery on the Bosch PS10-2A can drive 100 3 inch screws per battery charge. Revolutionary variable speed trigger design provides increased sensitivity and control. Reversible drive allows the Bosch ps10-2a to be equally useful at driving or removing screws. The PS10-2A has built-in quick change chuck which allows quick change between bits while preventing bit loss, simply pull to insert or release 1/4 inch hex shank bits.

Bosch PS10-2A Specifications: Length: 90degrees = 3-1/2" / 180degrees = 11-1/2" No Load RPM:0-600 Rating: 12V Torque: 80" lbs. Weight: 2.2 lbs. Bosch PS10-2A Includes: (1) 12V Max I-Driver (1) Carrying Case (2) 1.5" Power Drive Bits (1) 30 Minute Charger (2) Litheon 12V Max Batteries Bosch PS10-2A Features: 80" lbs. of Torque Drives 100 3" screws per battery charge Ultra-Compact Head Length 3.5" total head length 3 times shorter than most popular competitor 90degreesArticulating Head Rotates and locks into five positions for increased versatility 7+1 Electronic Clutch Precision driving eliminates over torque in soft base materials. Drill mode allows pilot and other small bore holes. Forward/Reverse Button Equally useful at driving or removing screws Quick Change Chuck Prevents bit loss in drill or drive mode - pull to insert or release 1/4" hex shank bits Storage Hanger Convenient tool storage between uses Variable Speed Trigger Revolutionary design provides increased sensitivity and control

Have you got hard to reach jobs? The Bosch � I-Driver� can get into spaces others can't. The 90 Articulating Head (fancy name that means it can be rotated and locked in 5 different positions) offers versatility. The ultra compact head is only 3-1/2" long. Seven clutch settings can eliminate over-torqued screws in soft materials. A drill only mode allows for drilling pilot holes. The I-Driver is variable speed, 0 � 600 RPM and comes with a 12 volt battery capable of driving 100 3" screws on one battery charge. Uses ball detent bits only. Tool made in Malaysia, charger made in China. SPECIFICATIONS: Volts: 12 RPM: 0 � 600 Torque: 80 in.-lb. Length @ 90 : 3-1/2" Length @ 180 : 11-1/2" Weight: 2.2 lb. INCLUDES: 2 Litheon 12 V batteries 30 minute charger (2) 1.5� power drive bits Carrying case

Cordless Drill. The ultra compact head is just 3.5 total head length allowing the I-Driver to fit where traditional drills even right angle drills cannot go. 90° articulating head with five position locks helps the user get to hard to reach spots with ease. 80 inches per pound of torque gives you the power you need for driving screws. The Litheon advanced lithium ion battery drives one hundred 3 screws per charge. Revolutionary variable speed trigger design provides increased sensitivity and control. Reversible drive allows the pocket driver to be equally useful at driving or removing screws. Seven setting electronic clutch enables precision driving and eliminates over torque in soft base materials. The drill mode allows pilot and other small bore holes. Length: 10. Width: 4. Height: 12

We'd wager there have been plenty of times you tried to maneuver a drill/driver into a spot that just wouldn't allow it and wished you had a small, powerful tool that would drive a screw where others just can't go. Here it is. The PS10-2A is one of the handiest, most powerful little drivers we've laid hands on. It's impressively powered by "litheon, " which Bosch calls "the industry's most advanced lithium-ion battery technology." We can attest that there's absolutely no lag in power, and the run time is great - more than 100 drives per charge. Recharge time is just 30 minutes, so you should never have to wait for a battery. The best feature, of course, is the clever design. Instead of a pistol grip like most drivers, this one has a sturdy tool body and an articulating head that has five detents, letting you set it however you need it. The head itself is just 3-1/2 inches long, so it's no struggle at all to slip it into tight spaces such as in between studs, under-sink cabinets, between joists and other tricky situations. If it's length you need, just flip the head to the vertical position and it's literally like having a screwdriver at your fingertips; it's not quite a foot long at its full length. It uses 1/4-inch hex bits, and they're easy to change. We would have liked to see some on-board bit storage, but that's a small point. The two-finger trigger is comfortable, and it's quite sensitive, so take care not to strip your fasteners while you're on the learning curve. In all, we're really pleased with this little driver, and we think there's a place for it in just about every toolbox. Includes: tool, (1) carrying case, (2) 12 volt batteries, (1) 30-minute charger, (2) 1.5" drive bits.

We’d wager there have been plenty of times you tried to maneuver a drill/driver into a spot that just wouldn’t allow it and wished you had a small, powerful tool that would drive a screw where others just can’t go. Here it is. The PS10 is one of the handiest, most powerful little drivers we’ve laid hands on. It’s impressively powered by "litheon, " which Bosch calls "the industry’s most advanced lithium-ion battery technology." We can attest that there’s absolutely no lag in power, and the run time is great – more than 100 drives per charge. Recharge time is just 30 minutes, so you should never have to wait for a battery. The best feature, of course, is the clever design. Instead of a pistol grip like most drivers, this one has a sturdy tool body and an articulating head that has five detents, letting you set it however you need it. The head itself is just 3-1/2 inches long, so it’s no struggle at all to slip it into tight spaces such as in between studs, under-sink cabinets, between joists and other tricky situations. If it’s length you need, just flip the head to the vertical position and it’s literally like having a screwdriver at your fingertips; it’s not quite a foot long at its full length. It uses ¼-inch hex bits, and they’re easy to change. We would have liked to see some on-board bit storage, but that’s a small point. The two-finger trigger is comfortable, and it’s quite sensitive, so take care not to strip your fasteners while you’re on the learning curve. In all, we’re really pleased with this little driver, and we think there’s a place for it in just about every toolbox. --Kris Jensen-Van Heste What’s in the Box PS10 driver, two lithium-ion batteries, 30-minute charger, soft carrying case, two bits

2611-7697 Features: -Cordless Drill.-The ultra compact head is just 3.5'' total head length allowing the I-Driver to fit where traditional drills, even right angle drills, cannot go.-90 articulating head with five position locks helps the user get to hard to reach spots with ease.-80 inches per pound of torque gives you the power you need for driving screws.-The Litheon advanced lithium ion battery drives one hundred 3'' screws per charge.-Revolutionary variable speed trigger design provides increased sensitivity and control.-Reversible drive allows the pocket driver to be equally useful at driving or removing screws.-Seven setting electronic clutch enables precision driving and eliminates over torque in soft base materials.-The drill mode allows pilot and other small bore holes. Dimensions: -Built -in quick change chuck allows quick change between bits while preventing bit loss, simply pull to insert or release 1/4'' hex shank bits.