Shopping Search

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and

T-D2-IN-NG TakagiNatural GasIndoor Tankless Water Heater The T-D2-IN/OS is ideal for light-commercial applications including small restaurants and beauty salons. Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-D2-IN/OS is also suited for heavier-residential usages such as space-heating and domestic recirculation systems. In addition to the added durability, the T-D2-IN/OS incorporates all the features of the popular T-K3-Pro while increasing the max flow rate to 10.0GPM and providing an outside specific model. Both T-D2-IN and T-D2-OS models are Energy Star Certified. TM-RE30 Included with T-D2-IN and T-D2-OS. Natural Gas Input : Min. 11, 000 Btu, Max. 199, 000 Btu Gas Connection: 3/4" NPT Water Connection: 3/4" NPT Natural Gas Pressure Inlet : Min. 5.0" W.C., Max. 10.5" W.C. Weight:

Rain Cap allows you to vent through the roof and keep out rain, pests, birds and other foreign objects.Features:Simple Leak-proof gasketed connections (no sealant required)Quick and easy- "Snap-Lock" connectionsHigh quality-Category III Stainless SteelVersatility-vertical and horizontal terminationsSliding adjustable pieces and convenience-T-vent kits are availableAll T-Vent Products are UL ListedAll connections have heat resistant rubber gaskets

Takagi T-H2-DV NG Condensing Tankless Water Heater The T-H2, Takagi's greenest model, is the 2nd Generation High Efficiency Tankless unit with an average efficiency of 90% with natural gas (estimated) and 90% with propane (estimated). At a T of 60ºF in warmer areas - where the winter ground water is 60ºF and with the output set at 120ºF - the unit will provide 6.1 GPM, or 366GPH. In other areas where the input temperature may be 40ºF or less, you can expect a flow rate of about 4.6 GPM or 276 GPH. The T-H2 can provide at least three showers worth of water simultaneously along with one appliance at input temperature of 60ºF or greater. The T-H2 can be vented with PVC, providing 0 clearance for DV installations. This state-of-the-art tankless water heater uses not one, but two heat exchangers to maximize the units energy efficiency, resulting in the higher-than-average efficiencies stated above. The primary heat exchanger is made of "Heat Resistant Alloy" HRS35 Copper, Takagi has also added a "High Corrosion Re

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and

T-D2-OS-NG TakagiNatural GasOutdoor Tankless Water Heater The T-D2-IN/OS is ideal for light-commercial applications including small restaurants and beauty salons. Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-D2-IN/OS is also suited for heavier-residential usages such as space-heating and domestic recirculation systems. In addition to the added durability, the T-D2-IN/OS incorporates all the features of the popular T-K3-Pro while increasing the max flow rate to 10.0GPM and providing an outside specific model. Both T-D2-IN and T-D2-OS models are Energy Star Certified. TM-RE30 Included with T-D2-IN and T-D2-OS. Natural Gas Input : Min. 11, 000 Btu, Max. 199, 000 Btu Gas Connection: 3/4" NPT Water Connection: 3/4" NPT Natural Gas Pressure Inlet : Min. 5.0" W.C., Max. 10.5" W.C. Weight

The NEW T-M32 model was specifically designed for heavy-duty commercial applications The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features HRS35 Copper alloy and a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. The T-M32 is also backwards compatible with the T-M1 model, making any additions or replacements to current T-M1 systems easy and simple. Please

Rain Cap allows you to vent through the roof and keep out rain, pests, birds and other foreign objects.Features:Simple Leak-proof gasketed connections (no sealant required)Quick and easy- "Snap-Lock" connectionsHigh quality-Category III Stainless SteelVersatility-vertical and horizontal terminationsSliding adjustable pieces and convenience-T-vent kits are availableAll T-Vent Products are UL ListedAll connections have heat resistant rubber gaskets

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and

Takagi T-KJr2 Tankless Water Heater (Propane Model) Customer Service Technical Support 877-681-0010 To send us a message click here WE COMBINE SHIPPING (more info) LOWEST PRICE GUARANTEED ONLY BRAND NEW PRODUCTS Add this store to favorites Store Home Specials Shipping Policy Returns Learning Center FAQ's STORE CATEGORIES: PEX Tubing w/ Oxygen Barrier 3/8" PEX Tubing 1/2" PEX Tubing 5/8" PEX Tubing 3/4" PEX Tubing 1" PEX Tubing PEX Tubing Non-Barrier 3/8" PEX Tubing 1/2" PEX Tubing 3/4" PEX Tubi

T-H2-DV-NG Takagi 2nd Generation High Efficiency Tankless Water Heater - Direct Vent Only- Natural Gas The T-H2, Takagi's greenest model, is the 2nd Generation High Efficiency Tankless unit with an average efficiency of 90% with natural gas (estimated) and 90% with propane (estimated). At a ∆T of 60ºF in warmer areas - where the winter ground water is 60ºF and with the output set at 120ºF - the unit will provide 6.1 GPM, or 366GPH. In other areas where the input temperature may be 40ºF or less, you can expect a flow rate of about 4.6 GPM or 276 GPH. The T-H2 can provide at least three showers worth of water simultaneously along with one appliance at input temperature of 60ºF or greater. The T-H2 can be vented with PVC, providing 0 clearance for DV installations. PVC venting can be used in all applications and 3" exhaust venting is c

The NEW T-M32 model was specifically designed for heavy-duty commercial applications The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features HRS35 Copper alloy and a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. The T-M32 is also backwards compatible with the T-M1 model, making any additions or replacements to current T-M1 systems easy and simple. Please

Released in 2010, the T-K4 improves upon many of the features from the T-K3. The T-K4 is one of Takagi's smaller tankless water heaters. At 13.8 inches wide and weighing only 38 pounds, its ultra-compact design allows it to be mounted on a wall. Takagi's newest tankless water heater also features an energy factor of 0.82, so it is extremely efficient and environmentally friendly. Since tankless water heaters only burn gas when hot water is needed, installing this unit can help homeowners save up to 45% on their monthly gas bills. The T-K4-OS has a built-in power venting system and was designed specifically for outdoor installations. The T-K4-OS does not require any additional Category III venting or vent caps, making installation one step easier for installers. Specifications: * Capacity: 2 to 3 Bathrooms * Flow Rate: Maximum 8.0 GPM * Gas Inputs: 11, 000 to 190, 000 BTU per hour * Energy Factor Rating: 0.82 * Inlet Gas Pressure: Min: 5.0" W.C. / Max 10.5" W.C. * Dimensions: 20.3" H x 13.8" W x 8.5" D * No Venting Required * Electric Ignition Type: Natural Gas (NG) Installation Type: Outdoor Only Energy Factor: 0.82 Inlet Gas Pressure: 5.0-10.5"W.C. Manifold Pressure: 2.0-2.5"W.C. Application: Plumbing Height: 20.3" Width: 13.8" Depth: 8.5" Max Flow (GPM): 8.0 Voltage: ? Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth's electrical field and the electricity running through your wires). 120 VAC Gas Input: 11000-190000 BTU/h Water Connection: 3/4" Gas Connection: 3/4" Temperature Range (F): 99?-167?F PSI Range: 15-150 psi Weight: 38 lbs

199, 000 BTU .05 GPM activation flow rate No venting required Internatl freeze-protection system Built-in temperature, flow rate, and diagnostic display, Manufacturer: Takagi

The heater includes a factory wall mounting system, With 95% energy efficiency, the T-H1 is the most technologically advanced water heater on the instantaneous water heater market today, The new T-H1 is equipped with a Pre-Heating system and Built in Neutralizer that provides greater efficiency and reliability, Designed for commercial and heavy residential use, Flow Rate:0.75 - 10.2 GPM 199, 000 Btu's, Optional accessories are TH-TV08 Outside Vent Kit, T-H1 Direct Vent Kits, TK-REO1 Remote Control, Must ship Motor Freight only

T-K4-IN-NG Takagi(Indoor) Natural GasTankless Water Heater Natural Gas Input : Min. 11, 000 Btu, Max. 190, 000 Btu Gas Connection: 3/4" NPT Water Connection: 3/4" NPT Natural Gas Pressure Inlet : Min. 5.0" W.C., Max. 10.5" W.C. Weight: 38 lbs Dimensions: 20.5" x 13.8" x 8.5" Ignition: Electronic Ignition Electrical Supply: AC 120V (60 Hz) Water Pressure: Min. 15 psi Max. 150 psi Natural Manifold Pressure: 2.0-2.5" W.C. Standard Residential Usage: Mid-sized home with 2 showers and a sink or a washer will likely be operating simultaneously

Takagi TK-RE02 Remote Temperature Controller is an optional upgrade for takagi tankless water heaters, which allows you to: · Override factory settings to set-up the desired water temperature · Control the water heater remotely if it's installed in concealed or hard to reach places · Monitor water flow and incoming / outgoing water temperatures · Monitor any errors Available temperature settings for the Takagi TK-RE02 are: 95, 100, 102, 104, 106, 108, 110, 111, 113, 115, 117, 122, 131, 140, 158 and 167F This model also replaces an older model TK-RE01. Takagi TK-RE02 is compatible with the following tankless water heaters: T-KJr, T-K3-OS and T-K3-SP.

T-KJR2-NG Takagi Jr. Outdoor Natural GasTankless Water Heater Released in 2010, the T-KJr2-IN and T-KJr2-OS is the smallest water heater in the Takagi tankless line. But this small, but powerful unit - with gas inputs up to 140, 000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms. Designed to virtually do anything a 40-gallon tank-type water heater can do and more, the compact, wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. The T-K Jr. has an energy factor of 0.81-0.83. At an average (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM, or 228 GPH. In colder areas where the input t

The NEW T-M32 model was specifically designed for heavy-duty commercial applications The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features HRS35 Copper alloy and a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. The T-M32 is also backwards compatible with the T-M1 model, making any additions or replacements to current T-M1 systems easy and simple. Please

T-KJR2-NG Takagi Jr. (Indoor) Natural GasTankless Water Heater Released in 2010, the T-KJr2-IN and T-KJr2-OS is the smallest water heater in the Takagi tankless line. But this small, but powerful unit - with gas inputs up to 140, 000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms. Designed to virtually do anything a 40-gallon tank-type water heater can do and more, the compact, wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. The T-K Jr. has an energy factor of 0.81-0.83. At an average (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM, or 228 GPH. In colder areas where the input

The NEW T-D2-IN model was specifically designed for light commercial applications. The T-D2-IN offers all the features of the "Revolutionary T-K3-Pro" model along with a max flow rate of 10.0GPM.Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-D2-IN/OS is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.Natural gasIncludes TM-RE30 remote11, 000 ~ 199, 000 BTU/hr0.82 energy factor10.0 GPM max flow rateIndoor installationSpecificationsNOTE: All water heaters of any type MUST be installed by a trained and licensed technician. Failure to do so may result in damage, injury or death. Warranties may be void if installed by non-licensed personnel. We will not be held liable for any damages, injury or death caused by proper or improper installation of hot water heaters. We will not be held liable for any local state, county or city code violations caused by the improper selection of water heaters.

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and

T-K4-OS-NG Takagi Natural GasTankless Water Heater Natural Gas Input : Min. 11, 000 Btu, Max. 190, 000 Btu Gas Connection: 3/4" NPT Water Connection: 3/4" NPT Natural Gas Pressure Inlet : Min. 5.0" W.C., Max. 10.5" W.C. Weight: 38 lbs Dimensions: 20.5" x 13.8" x 8.5" Ignition: Electronic Ignition Electrical Supply: AC 120V (60 Hz) Water Pressure: Min. 15 psi Max. 150 psi Natural Manifold Pressure: 2.0-2.5" W.C. No venting required Standard Residential Usage: Mid-sized home with 2 showers and a sink or a washer will likely be operating simultaneously

The NEW T-M32 model was specifically designed for heavy-duty commercial applications The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features HRS35 Copper alloy and a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. The T-M32 is also backwards compatible with the T-M1 model, making any additions or replacements to current T-M1 systems easy and simple. Please

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder

T-K4-IN-LP Takagi Liquid Propane Tankless Indoor Water Heater LPG Input: Min. 11, 000 Btu, Max. 190, 000 Btu Gas Connection: 3/4" NPT Water Connection: 3/4" NPT LP Gas Pressure Inlet: Min. 8.0" W.C., Max. 14.0" W.C. Weight: 38 lbs Dimensions: 20.5" x 13.8" x 8.5" Ignition: Electronic Ignition Electrical Supply: AC 120V (60 Hz) Water Pressure: Min. 15 psi Max. 150 psi LP Manifold Pressure: 3.7-4.0" W.C. Standard Residential Usage: Mid-sized home with 2 showers and a sink or a washer will likely be operating simultaneously

The New T-M50 model, also known as "The Monster Tankless, " is Takagi's most powerful tankless water heater yet and was developed specifically for heavy duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy. Features: 380, 000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder

T-KJR2-LP Takagi Jr. (Outdoor) Liquid Propane Tankless Water Heater Released in 2010, the T-KJr2-IN and T-KJr2-OS is the smallest water heater in the Takagi tankless line. But this small, but powerful unit - with gas inputs up to 140, 000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms. Designed to virtually do anything a 40-gallon tank-type water heater can do and more, the compact, wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. The T-K Jr. has an energy factor of 0.81-0.83. At an average (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM, or 228 GPH. In colder areas where the input t

Released in 2010, the T-K4 improves upon many of the features from the T-K3. The T-K4 is one of Takagi's smaller tankless water heaters. At 13.8 inches wide and weighing only 38 pounds, its ultra-compact design allows it to be mounted on a wall. Takagi's newest tankless water heater also features an energy factor of 0.82, so it is extremely efficient and environmentally friendly. Since tankless water heaters only burn gas when hot water is needed, installing this unit can help homeowners save up to 45% on their monthly gas bills. Specifications: * Capacity: 2 to 3 Bathrooms * Flow Rate: Maximum 8.0 GPM * Gas Inputs: 11, 000 to 190, 000 BTU per hour * Energy Factor Rating: 0.82 * Inlet Gas Pressure: Min: 8.0" W.C. / Max 14.0" W.C. * Dimensions: 20.3" H x 13.8" W x 8.5" D * Direct Vent Capability * Electric Ignition Type: Liquid Propane (LP) Installation Type: Indoor Only Direct Vent Convertible Energy Factor: 0.82 Vent Size: 4" Vent Type: Category III Stainless Steel Inlet Gas Pressure: 8.0"-14.0"W.C. 3.7-4.0"W.C. Application: Plumbing Height: 20.3" Width: 13.8" Depth: 8.5" Max Flow (GPM): 8.0 Voltage: ? Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth's electrical field and the electricity running through your wires). 120 VAC Gas Input: 11000-190000 BTU/h Water Connection: 3/4" Gas Connection: 3/4" Temperature Range (F): 99?-167?F PSI Range: 15-150 psi Weight: 38 lbs

199, 000 BTU .05 GPM activation flow rate No venting required Inlet, outlet thermistors for constant temperature monitoring Built-in freeze protection, Manufacturer: Takagi