Shopping Search

NVT NV-BKT214-8 Mounting Bracket for NV-214A-M (8 included) . Network Video Technologies is the worldwide leader in Hybrid UTP-based surveillance video and camera power transmission.

The NVT Model NV-452R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or color video on up to one mile (1, 6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2, 4km) using Category-5.The unparalleled interference rejection and low emissions of the Model NV-452R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.FEATURES:Four active receiver channels in one productFull-motion CCTV video at distances up to 3, 000ft (1km) when used with any passive NVT transceiver 5, 280ft/1 mile (1, 6km) when used with NV-653T transmitter and Cat-2 or 3 wire 8, 000ft/1.5 miles (2, 4km) NTSC when used with NV-653T and Cat-5 wireBuilt-i

4-CH ACTIVE VIDEO RECEIVER

The NVT Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. This new product incorporates the transceiver engine of NVT's popular NV?213A video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or ''press-fit'' terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9'' mini-coax pigtail lead for direct video output connection from the camera. Along side this coax lead are two sets of ''press-fit'' terminal blocks for quick pass through connections for your camera's Power and Data. On the ''house'' or output side of the product you have the option of using convenient ''press-fit'' UTP connectors or the more efficient RJ45. The unparalleled interference rejection an

The NVT Model NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. The NVT Model NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT?s popular NV-213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT?s PVDTM product line. Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room. The unparalleled interference rejection and low emissions of the NV-216A-PV allows video signals to co-exist in the

The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. ?Up-the-coax? type P/T/Z signals may be sent over the same wire pair. Used as a receiver, the NV413A is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output. The unparalleled interference rejection and low emissions of the Model NV-413A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.

ACTIVE VIDEO TRANSMITTER

ACTIVE VIDEO TRANSMITTER

The NVT Model NV-653T Video Transmitter is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1, 6km) using Category-2 or -3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2, 4km) NTSC using Category-5. Baseband (composite) signals of any type are supported. The unparalleled interference rejection and low emissions of the Model NV-653T allows long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying ''hum-bars'' when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.Full-motion CCTV video at distances up to 5, 280ft/1 mile (1, 6km) when used with active NVT receiver or hub and Cat-2 or Cat-3 wire, or 8, 000ft/1.5 miles (2, 4km) NTSC with Cat. 5 or better wire Exceptional interference rejection Built

The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1, 6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2, 4km) using Category-5. Baseband (composite) signals of any type are supported. The unparalleled interference rejection and low emissions of the Model NV652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.

ACTIVE VIDEO RECEIVER

NV-872 DigitalEQ™ Active Receiver Distribution Amplifier Hub The NV-872 is a 8-channel active (amplified) hub that allows the transmission of real-time monochrome or color video for distances up to one mile (1, 6Km) using Category-2 Unshielded Twisted-Pair (UTP) wire. The Receiver hub continuously and automatically compensates for cable attenuation, ground-loops, and wiring polarity, independent of video signal image. The 1U high hub features four outputs per channel for high-density distribution amplifier applications, and is equipped with multi-stage transient protection.

4-CH ACTIVE VIDEO RECEIVER

ACTIVE VIDEO RECEIVER

The NVT Model NV-314A Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Applications include Security/Surveillance, Video Distribution, or Distance Learning. The unparalleled interference rejection and low emissions of the Model NV-314A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. Up-the-coax type signal may be sent over the same wire pair. The NV-314A comes with an RJ-45 patch-cord. For Rack-mounting, use the NV-418AR, which contains hardware equivalent to two NV-314As. <LIFull-motion monochrome or color video and audio at distances up to: 1, 000ft (300m) when used with another passive transceiver 3, 000ft (1km) when used with an active receiver such as the NV-518A No power required Built-

The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Up-the-coax type signal may be sent over the same wire pair. Used as a transmitter, the NV-214A-M has a mini-coax pigtail lead which allows for in-camera mounting in most dome cameras and greater number of mounting options in general. The unparalleled interference rejection and low emissions of the Model NV214AM allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.

The NVT model NV-16PS10-PVD combines a 1 Amp/channel* power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts. At the camera, Power, Video and Data connections are made using the NV-216A-PV (power-video only) or the NV-218A-PVD transceiver via an RJ45 connector and a single 4-pair cable. Control/MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Consolidated telemetry data, if required, passes through the NV-16PS10-PVD's Data path, and is connected to the controller via another 4-pair RJ45 cable.Provides Class 2 SELV camera power and pass-through video & telemetry data connectivity for up to 16 cameras, each via a single RJ45 4-pair UTP cable. Independently selectable 24 or 28 VAC with 1 Amp

NVT NV-813S 8-Channel Passive Stub Hub . Network Video Technologies is the worldwide leader in Hybrid UTP-based surveillance video and camera power transmission.

NV-226J-PV Video Transmitter +12VDC Converter The NVT Model NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24AC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable. The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low-voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals. As with all NVT products, the NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.

The NVT Model NV-208A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. An improvement over NVT’s popular NV-213A video transceiver, the NV-208A-M features a Screwless UTP terminal block and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT’s passive products for applications under 750ft (225m). The NV-208A-M Video Transceiver also incorporates new improved transient protection that eliminates the need for a ground screw. The unparalleled interference rejection and low emissions of the NV-208A-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products,

NVT NV-217J-M Single Ch Passive Video Transciever RJ45 . Network Video Technologies is the worldwide leader in Hybrid UTP-based surveillance video and camera power transmission.

The NVT Model NV-213A Video Transceivers are passive (non-amplified) devices that allow the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. “Up-the-coax” type P/T/Z signals may be sent over the same wire pair. Used as a receiver, the NV-213A–M is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output. The unparalleled interference rejection and low emissions of the Model NV213A (-M) allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated. 2 Units are required for one system!

The auction is for: Network Video Technologies NV-1613 16 Channel UTP Passive Transceiver Hub, NEW The item is NEW. Please, email for shipping quote or if you have any questions. IMPORTANT! PLEASE READ ALL TERMS BEFORE YOU BID. Payment Payment needs to be made within 5 business days of the end of the auction. If payment is not received the item will be offered to the next highest bidder or re-listed.Negative feedback will be posted regarding the non-paying bidder.In addition, TPI, LLC will proce

The auction is for: Network Video Technologies NV-413A 4 port Passive Video Transceiver, New The item is NEW. Please, email for shipping quote or if you have any questions. IMPORTANT! PLEASE READ ALL TERMS BEFORE YOU BID. Payment Payment needs to be made within 5 business days of the end of the auction. If payment is not received the item will be offered to the next highest bidder or re-listed.Negative feedback will be posted regarding the non-paying bidder.In addition, TPI, LLC will proceed and

NVT NV-215J-M Single Ch Passive Video Transciever RJ45 . Network Video Technologies is the worldwide leader in Hybrid UTP-based surveillance video and camera power transmission.

NVT NV-212A Single Channel Passive Video Transceiver . Network Video Technologies is the worldwide leader in Hybrid UTP-based surveillance video and camera power transmission.

4 CHANNEL PASSIVE VIDEO TRANSCEVIER

4 CHANNEL PASSIVE VIDEO TRANSCEVIER

NEW SEALED NVT NV-652R Active Video Receiver CCTV