Shopping Search

No Description

1 Channels, RMS Power per Channel: 160 W @ 4 Ohm, Frequency Response: 20 Hz - 20 kHz, SNR: 85 dB, With Remote Control

2 Channels, RMS Power per Channel: 550 W @ 4 Ohm / 300 W @ 8 Ohm, Frequency Response: 50 Hz - 60 Hz, SNR: 76 dB, With Remote Control

8 Channels, RMS Power per Channel: 50 W @ 8 Ohm, Frequency Response: 10 Hz - 40 kHz, SNR: 105 dB, With Remote Control

1 Channels, RMS Power per Channel: 200 W @ 4 Ohm / 120 W @ 8 Ohm, Frequency Response: 1 Hz - 50 kHz, SNR: 90 dB, With Remote Control

Bridgeable, Frequency Response: 10 Hz - 50 kHz

2 Channels, Bridgeable, Frequency Response: 20 Hz - 20 kHz, SNR: 104 dB

No Description

2 Channels, RMS Power per Channel: 70 W @ 4 Ohm / 60 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz

4 Channels, Bridgeable, RMS Power per Channel: 1000 W @ 2 Ohm / 660 W @ 4 Ohm / 350 W @ 8 Ohm

PYLE 2000 Watts Hybrid Pre-Amplifier w/AM/FM Tuner Pyle P2001AT Pyle P2001AT Details Separate gain control for preamp and subwoofer 2000 Watts peak power 600 Watts @ 2 ohms 450 Watts @ 4 ohms 240 Watts @ 8 ohms Inputs: RCA (2 audio sources) Outputs: Banana binding post (to speakers) 1 RCA dedicated for record line Digital fluorescent output display meter iPod / MP3 input with cable Dimensions: 19''w x 3.1''h x 13''d (483 x 80 x 330mm) Weight: 14.3 lbs (6.5 kg) 110-220V Switchable AM/FM Quartz Synthesized Tuner Auto Station Seek Brand new and factory sealed. Details Separate gain control for preamp and subwoofer 2000 Watts peak power 600 Watts @ 2 ohms 450 Watts @ 4 ohms 240 Watts @ 8 ohms Inputs: RCA (2 audio sources) Outputs: Banana binding post (to speakers) 1 RCA dedicated for record line Digital fluorescent output display meter iPod / MP3 input with cable Dimensions: 19''w x 3.1''h x 13''d (483 x 80 x 330mm) Weight: 14.3 lbs (6.5 kg) 110-220V Switchable AM/FM Quartz Synthesized Tuner Auto Station Seek

12 Channels, Bridgeable, RMS Power per Channel: 37 W @ 4 Ohm / 30 W @ 8 Ohm

The LNA-2000-B pre-amp is a great solution for those who are seeking big boosts in signal gain from their wide-band discone or single-band yagi (beam) antenna. Note that in urban settings or in areas near transmission towers boosting the signal by 20db of gain will overpower the front end of most scanners. But in quieter areas the LNA-2000-B can provide excellent gain to pull in those hard to hear distant stations. (You can never guarantee how far you'll be able to hear -- that's dependent on dozens of factors that vary at each location.) This is a new model of the wide band preamp. Powered via a feedthrough capacitor, i.e. via separate cable. (Not via coax cable). A separate power line (2 leads for power and ground) must be run to the pre-amp and is to supply 12 volts DC. This is an improved model against vulnerability to possible damage problems due to supply peaks when supply voltage is turned on/off or from static electricity in the air.Our N-Male to F-male (1-meter long) RG58 Cabl

2 Channels, Bridgeable, Frequency Response: 20 Hz - 20 kHz, SNR: 100 dB

2 Channels, Bridgeable, Frequency Response: 5 Hz - 50 kHz, SNR: 100 dB

2 Channels

2 Channels, Frequency Response: 10 Hz - 100 kHz, SNR: 75 dB

NEW 2000 Watts Hybrid Pre-Amplifier W/AM-FM Tuner/USB/ Description 1 YEAR WARRANTY ~ Features Hybrid Pre-Amplifier is very durable and reliable. This is a great investment and also can be a great gift. Features Dual VHF High Band Wireless Microphones 2000 Watts Peak Power 600 Watts @ 2 Ohms 460 Watts @ 4 Ohms 240 Watts @ 8 Ohms Inputs: RCA (2 Audio Sources) Outputs: Banana Binding Post 1 RCA Dedicated For Record Line Output 2 Mono RCA Dedicated For Subwoofer Output 1 RCA Dedicated For Preamp Output Separate Gain Control For Preamp And Subwoofer Digital Fluorescent Output Display Meter Ipod / MP3 Input With Cable USB Reader Function Removable Rack-Mount Brackets Dimensions: 19''w X 3.1''h X 13''d (483 X 80 X 330mm) Weight: 18.7 Lbs (8.5 Kg) 110-220V Switchable AM/FM Quartz Synthesized Tuner Auto Station Seek

RMS Power per Channel: 300 W @ 4 Ohm / 150 W @ 8 Ohm, Frequency Response: 20 Hz - 20 kHz, SNR: 109 dB, With Remote Control

Product Features: Remote Control: With Remote Control

LNA-WIDE-O Pre-Amplifier Outdoor All-Weather Mast-Mounted Low-Noise Pre-AmplifierAll band Low Noise Outdoor AmplifierFrequency ranges: 25-1300 MHz Gain 23 dB (typical)Input/output impedance 50 OhmInput/output connectors: NPower supply voltage: 12 to 14V DC(max. voltage limits 11 to 20V DC)Supply voltage connector: SO239Current consumption: 60 mANoise figure: 3.0dB typ. This LNA has been designed in order to improve weak signal reception on all scanner bands from 25-1300 MHz continuous. The LNA uses a weatherproof housing with metal baseplate with low-loss N connectors and HD plastic cover that protects the device against the weather. Supply of power is universal, i.e. two methods can be used. 1. Separate cable for DC voltage (thin coaxial cable is recommended which adds to reliability) to the SO239 connector on the LNA baseplate, or 2. supply via the RF coaxial cable. Both methods are equivalent. The LNA is protected against over voltage and against voltage spikes resulting from static

2 Channels, RMS Power per Channel: 70 W @ 4 Ohm / 45 W @ 8 Ohm

Give your audio the power it so richly deserves with the Peachtree220 2-channel power amplifier. A new breed of Class D amplifier delivers 220W of power to your speakers, letting you enjoy impressive detail and musicality, by bringing out the full potential of your speakers for ear-pleasing highs and room-shaking bass. Connect it to your Peachtree novaPre, or other receiver or pre-amplifier, and hear the difference great power makes.

2 Channels, Bridgeable, RMS Power per Channel: 75 W @ 4 Ohm / 60 W @ 8 Ohm, Frequency Response: 10 Hz - 30 kHz, SNR: 100 dB, With Remote Control

Bridgeable, RMS Power per Channel: 1550 W @ 2 Ohm / 1500 W @ 4 Ohm / 650 W @ 8 Ohm, Frequency Response: 10 Hz - 100 kHz, SNR: -1 dB

2 Channels, RMS Power per Channel: 120 W @ 4 Ohm

2 Channels, RMS Power per Channel: 100 W @ 6 Ohm, Frequency Response: 30 Hz - 15 kHz, SNR: 90 dB

Like all Crown amps, the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight, rock-solid low end, with smooth, detailed highs and a well-defined midrange. In short, the most accurate reproduction of an audio signal you’ve ever heard. And because we put the quality of sound above all else, a Crown is the most coveted amplifier in the business.

Bridgeable

Tuned low noise preamp. Range 118-137 MHz, gain typ. 20dB, BNC-connectors, supply 12V via coax. This device requires the PWR-I Power Injector for power. You can mount the LNA-Air outdoors at your antenna for the best signal amplification. In this way you will not be amplifying noise picked up by the coax cable. Run a short jumper cable from the pre-amp to the antenna such as our high-quality LMR-400 cable for antennas with N-connectors .Then run coax cable (see our various lengths we offer -- you may need a BNC to N or PL259 female adapter on one end and an F-connector adapter on the other) into your home or office where the scanner is located. There connect the other end of the long coax run to the Power-I. Run another short jumper such as the item below to the scanner. Power the Power-I with 12-volts using our AD-140 adapter.Jumper AC Adapter