Shopping Search

Toll Free Information Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. These are the best boat covers available. They are suitable for STORAGE, MOORING, AS WELL AS TRAILERING. The cover is made from marine grade polyester canvass. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. These are very waterproof. These will collect water. If you are going to use this for storage or in any condition on your boat where rain could collect on it, we would highly recommend some type of support system. Support systems are readily available online. It does not have to be anything incredibly complex..just enough to create and arch so it can shed rather than collect water. A very common and economical way to do this is to build a support system or 'skeleton' with pvc pipe. Grey electrical conduit works very well and is even less expensive. SPECIFICS FOR THIS COVER: This particular unit will fit a pontoon or deck boat with deck or playpen area between 25 ft and 28 ft AND A BEAM OF UP TO 102". It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length.

Toll Free Information Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. These are the best boat covers available. They are suitable for STORAGE, MOORING, AS WELL AS TRAILERING. The cover is made from marine grade polyester canvass. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. These are very waterproof. These will collect water. If you are going to use this for storage or in any condition on your boat where rain could collect on it, we would highly recommend some type of support system. Support systems are readily available online. It does not have to be anything incredibly complex..just enough to create and arch so it can shed rather than collect water. A very common and economical way to do this is to build a support system or 'skeleton' with pvc pipe. Grey electrical conduit works very well and is even less expensive. SPECIFICS FOR THIS COVER: This particular unit will fit a pontoon or deck boat with deck or playpen area between 21 ft and 24 ft AND A BEAM OF UP TO 96". It will accomodate up to a 96" beam, which is very standard for pontoon boats of this length.

Toll Free Hotline 1-800-609-9457. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time These are the best boat covers available. They are suitable for STORAGE, MOORING, AS WELL AS TRAILERING. The cover is made from marine grade polyester canvass. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. These are very waterproof. These will collect water. If you are going to use this for storage or in any condition on your boat where rain could collect on it, we would highly recommend some type of support system. Support systems are readily available online. It does not have to be anything incredibly complex..just enough to create and arch so it can shed rather than collect water. A very common and economical way to do this is to build a support system or 'skeleton' with pvc pipe. Grey electrical conduit works very well and is even less expensive. SPECIFICS FOR THIS COVER: This particular unit will fit a pontoon or deck boat with deck or playpen area between 21 ft and 24 ft AND A BEAM OF UP TO 96". It will accomodate up to a 96" beam, which is very standard for pontoon boats of this length.

Hurricane™ Polyester Canvas Pontoon Boat Cover, Model B- 21'-24' Pontoon Boats with beam widths to 96" Stearns ® best Universal Fit boat covers Typical Photo (Model A shown) These rugged pontoon boat covers feature our tough 300D Hurricane™ Polyester Marine Canvas Fits all popular pontoon boats with three sizes Tie-down rope and two stern-fit elastic cords are included Elastic cord sewn into entire bottom hem gives a tight and custom fit Hurricane™ 300D Fabric Tough 300D polyester Hurricane™ fabric won't shrink, won't stretch, and is much stronger than ordinary cotton canvas Resistant to mildew and U.V. damage Unique fabric coating technology resists dirt and stains while providing the ultimate in water resistance and repellency 4 year warranty on Hurricane™ Polyester Canvas 89428 Model B- 21'-24' Pontoon Boats with beam widths to 96"

number Of Pieces: 1. material: Polyester. warranty Description: 4 Year Limited Manufacturer Warranty. dimensions: Length: 280.0 "; Width: 168.0 "; Depth: 1.0 ". product Weight: 19.0 Lb.

Toll Free Information Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. These are the best boat covers available. They are suitable for STORAGE, MOORING, AS WELL AS TRAILERING. The cover is made from marine grade polyester canvass. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. These are very waterproof. These will collect water. If you are going to use this for storage or in any condition on your boat where rain could collect on it, we would highly recommend some type of support system. Support systems are readily available online. It does not have to be anything incredibly complex..just enough to create and arch so it can shed rather than collect water. A very common and economical way to do this is to build a support system or 'skeleton' with pvc pipe. Grey electrical conduit works very well and is even less expensive. SPECIFICS FOR THIS COVER: This particular unit will fit a pontoon or deck boat with deck or playpen area between 25 ft and 28 ft AND A BEAM OF UP TO 102". It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length.

Color: Grey Fits: 17'-20' Pontoon Boats with beam widths to 96" Weatherproof? Canvas Pontoon Boat Cover Rope attaches to rugged non-scratch D-rings-no grommets to pull out or scratch Adjustable elastic cord sewn along entire bottom hem, not just the end and an adjustable transom flap for a superb fit

Toll Free Information Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time These are the best boat covers available. They are suitable for STORAGE, MOORING, AS WELL AS TRAILERING. The cover is made from marine grade polyester canvass. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. These are very waterproof. These will collect water. If you are going to use this for storage or in any condition on your boat where rain could collect on it, we would highly recommend some type of support system. Support systems are readily available online. It does not have to be anything incredibly complex..just enough to create and arch so it can shed rather than collect water. A very common and economical way to do this is to build a support system or 'skeleton' with pvc pipe. Grey electrical conduit works very well and is even less expensive. SPECIFICS FOR THIS COVER: This particular unit will fit a pontoon or deck boat with deck or playpen area between 25 ft and 28 ft AND A BEAM OF UP TO 102". It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length.

The DuraShield 25-foot to 28-foot Pontoon Boat Cover is a durable, weatherproof, premium marine cover made of heavy duty 600 denier marine grade polyester. This cover features a breathable, water resistant, mildew resistant, and UV coated material that keeps your boat dry and out of harmful UV rays. We include 4 under straps and 4 over straps with click-fit ends to secure your cover on the road or for indoor or outdoor storage. A color-matched storage bag is provided with this cover. **Under-cover supports/bridges not included. Additional straps may be needed for trailer use, depending on application. Features: * 600 Denier Polyester * Double-Stitched Seams * Weatherproof, Water Resistant, and UV Protected * 8 Trailer / Tie Down Straps * Storage Bag * 5 Year Warranty Application: * 25' to 28' Pontoon and Deck Boats * 102" Max Beam Width

OUR BOAT COVERS ARE MADE FROM TOP QUALITY MATERIAL. ALL COVERS MANUFACTURED WITH 600 DACRON POLYESTER MATERIAL. COMPARE THICKNESS OF OUR COVERS TO A CANVASS COVER. HIGH QUALITY AT AFFORDABLE PRICES.

This heavy-duty boat ladder would be perfect for your boat or deck. It's four-step rather than three so it is even a little longer than some of the others that you would see for sale. It would also make the perfect gift for that boat enthusiast in your life. Pick one up today while they're still available!

OUR BOAT COVERS ARE MADE FROM TOP QUALITY MATERIAL. ALL COVERS MANUFACTURED WITH 600 DACRON POLYESTER MATERIAL. COMPARE THICKNESS OF OUR COVERS TO A CANVESS COVER. HIGH QUALITY AT AFFORDABLE PRICES.

Features Integrated buckle and strap system for easy fitting and traileringadjustable straps snap into quick-release buckles on the cover Storage bag and trailering straps, transom flap tie-down rope and two stern-fit elastic cords included Adjustable elastic hem cord sewn into entire bottom hem provides a tight, custom fit Dual air vents reduce inside moisture and ballooning of cover at high speeds Adjustable transom-flap for a superb fit High strength polyester StormPro 600D Marine Canvas designed for extra durability and all-weather protection Fabric coating technology and heavy-duty fabric for maximum water resistance and repellency Resistant to mildew and UV damage Won't shrink or stretch Fits most popular pontoon boat with three sizes 25 feet to 28 feet L beam width 96 inches Five year warranty

No Description

We offer our DeckMate Pontoon Consoles to match our clearance and discount Wise pontoon boats seats & furniture.  These strong, molded plastic consoles have an extra large access panel in the front which makes installing your steering system, wheel and electrical wiring and accessories very easy.  There is room to mount your fish finder on top between the cupholders.

We offer our DeckMate Pontoon Consoles to match our clearance and discount Wise pontoon boats seats & furniture.  These strong, molded plastic consoles have an extra large access panel in the front which makes installing your steering system, wheel and electrical wiring and accessories very easy.  There is room to mount your fish finder on top between the cupholders.

Looking to protect your boat with a great fitting cover? Look no further. Carver Styled-to-Fit boat covers are available in over 60 styles to ensure you get the best fitting cover available. By taking into account standard boat type features, such as a walk-thru windshield or bow rails, a styled-to-fit boat cover is able to provide a fit snug enough for trailering, provided a tie down kit is used (sold separately). Tie-down loops with double reinforced sewing are spaced every 2-3 feet around the hem. 1/4 inch shock cord ensures your cover will fit tightly around the hull. Our materials are breathable, water repellent, and mildew resistant. Choose from 10 oz. Cotton (1 year warranty), 11 oz. Poly-Cotton (3 year warranty), or 8 oz. Performance Poly-Guard (5 year warranty). Made in the USA.

This heavy-duty boat ladder would be perfect for your boat or deck. It's four-step rather than three so it is even a little longer than some of the others that you would see for sale. It would also make the perfect gift for that boat enthusiast in your life. Pick one up today while they're still available!

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Burgundy Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Burgundy Length of top: 10' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Burgundy Length of top: 8' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Add shade, shelter, and privacy to your pontoon boat. Providing comfort and convenience, this spacious enclosure fits easily over the bow area of your pontoon boat. Constructed from durable polyester fabric shell with zippered entryway, mesh windows, and supported by a shock-corded fiberglass pole framework. The enclosure measures about 56'L x 74'H depending on beam and rail height. Fits both 96' and 102' wide pontoon boats. The large interior radius allows you to sit comfortably on existing seating without bending over or crouching. After initial installation of the permanent hardware, the Pontoon Enclosure sets up easily and comes down in minutes for storage. Comes complete with enclosure, frame, marine-grade hardware, and storage bag. Not for use while underway.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN, Length of top: 12' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-609-9457. Sales hours: Monday - Friday 10a.m. to 2p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GRAY/GREY Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday - Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 10' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Blue Length of top: 8' Width: easily fits width between mount points of 85-90"Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday - Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 10' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday - Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 12' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

A quick and easy way to gain additional shaded area on your pontoon boat, while also protecting your seats from harmful UV rays or other harsh weather conditions. Constructed of Hot Shot™ marine-grade polyester fabric, the top is strong yet lightweight. It secures to the front bow of your existing bimini or hard top and to the playpen railing with quick-release buckles and adjustable straps. Folds up to a compact size for easy storage. Coverage area varies based on height of application. Recommended for 22'-24' pontoon boats. Not for use while underway.