Shopping Search

Housed in a rugged 3-U chassis, all seven models feature rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings. Inputs include both XLR and detachable Euro-style connectors. Outputs feature covered barrier strip connectors for safety agency compliance, and for added versatility, a DataPort V2 (Version 2) terminated with an HD-15 connector is provided for use with DPV2-compatible signal processing accessories such as the XC-3 Crossover, SF-3 Subwoofer Filter, LF-3 Low Frequency Filter and the DSP-3 with external power supply. Selectable high-pass filters are included to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry including DC, infrasonic, thermal overload, RF and short circuit protection.

Type: Stand, 10 Speeds, With 5 quart (4.7 liter) Mixing Bowl, 450 Watts

Output power capacity: 800 VA

With Pulp Ejection, 1056 Watts

No Description

450 W, Max backup time with full load: 85.2 Minutes, With Surge Suppression

Dual RCA and combo inputs. Dual output level controls and illumination. Stereo or bridged power into 4 or 8 ohms with stereo/mono switch.

2 Channels, Bridgeable, RMS Power per Channel: 225 W @ 4 Ohm / 150 W @ 8 Ohm, Frequency Response: 5 Hz - 35 kHz, SNR: 100 dB

For: ATX 12V, Power: 450 Watt

Buy American Compliant The LEDP10W-40E LED Light Bar is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. 3, 440 lumens of light output with low voltage and amp draw, a 50, 000 hour rated service life and 9 to 46 volt compatibility provides operators with a versatile and powerful LED lighting solution. The LEDP10W-40E LED light bar from Magnalight produces 3, 440 lumens of bright light while drawing only 40 watts @3.35 amps from a 12 volt electrical system. Four CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 325' long by 75' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, offroading and commercial structure illumination. Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat b

Coaxial, 4-Way, 7" x 10", 225 Watt RMS, Non-Powered

No Description

No Description

For: ATX 12V, Power: 450 Watt, Single Fan

For: ATX 12V, Power: 450 Watt, Dual Fan

LED Boat Light - 4, 10-Watt LEDs - 450L X 75'W Spot Beam - 3440 Lumens - Extreme Environment (-Spot-White). Buy American Compliant The LEDPB10W-40E LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. 3, 440 lumens of light output with low wattage and amp draw, 50, 000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-40E LED boat light from Magnalight produces 3, 440 lumens of bright light while drawing only 40 watts @3.35 amps from a 12 volt electrical system. Four CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 450' long by 75' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Click here to see how using LED Boat Lights on the water can increase safety. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting.

Work Top Blender, 6 Speed, 48 oz. (1.4 Litre), with Pulse Feature

For: ATX

Take your light show to the next level with the affordable ADJ Mini Fog fog machine. Just pour the included fog juice into the Mini Fog, start it up, and within minutes you'll be generating 1, 500 cubic feet of fog a minute! You'll ensure your light show blows the crowd away, or just use the Mini Fog by itself to create some moody ambience on-stage.

The GudCraft WM450 24V is popular low start up wind speed wind turbine that generates power and runs your appliances and electronics in your home, cabins, boats, etc. Thousands have been sold and are in use worldwide. Without any doubt GudCraft WM450 accumulates more energy than any other comparable wind generator available, you will always see spinning, even in the light breeze.

Lumen is the new Watt - Better technology provides the same amount of brightness(lumens) while using less electricity(Watts). Lumens are a measure of light brightness and Watts are a measure of electricity used to create the light. The lumen output is rated at 450-lumens lasting for 25000-hours with a color temperature of 2700K. The bulb base is Medium. this bulb is GE 63027 10-Watt LED, 450-Lumen Track/Recessed Lighting PAR30 Light Bulb, Soft White. 10-Watt using LED technology. In the Track/Recessed Lighting/Indoor PAR category in the PAR30/LED segment. Bulb shape is PAR30. The MOL is 3.75-Inch. With the tremendous improvements in the rated lives of LED lamps, lighting decisions made today can last for decades or more. Designed to replace a 40-Watt incandescent. Has a CBCP of 1240. CRI of 80. ENERGYSTAR. Base color: Silver. Glass color: Clear. Bulb is Dimmable. GE's new 10-Watt Light emitting Diode LED Long-Neck PAR30 lamps bring energy efficient, long life and environmentally conscious options to traditional downlight applications. Outstanding energy efficiency - Compared to standard 45-Watt incandescent R30 reflectors, GE's dimmable LED PAR30 uses only 10-Watts, reducing energy consumption by 78-Percent. Although the lamps produce 30-Percent fewer lumens, the lamp optics concentrate light on the target, diminishing wasted extraneous light. . Environmentally conscious - these lamps are energy efficient, contain no lead or mercury and are RoHS compliant. Their long life also curbs the impact on the environment by allowing for fewer lamp replacements vs. standard Halogen and incandescent light sources. . 3-year limited warranty.GE life rating based on 70-Percent lumen maintenance, actual lamp life before failure maybe significantly longer.

Mid-Tower, ATX, Power: 450 Watt.

LED Boat Light - 4, 10-Watt LEDs - 450L X 75'W Spot Beam - 3440 Lumens - Extreme Environment (-Flood-White). Buy American Compliant The LEDPB10W-40E LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. 3, 440 lumens of light output with low wattage and amp draw, 50, 000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-40E LED boat light from Magnalight produces 3, 440 lumens of bright light while drawing only 40 watts @3.35 amps from a 12 volt electrical system. Four CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 450' long by 75' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Click here to see how using LED Boat Lights on the water can increase safety. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting.

Output power capacity: 750 VA, 450 W, Max backup time with full load: 53 Minutes, With Surge Suppression

No Description

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer, you can save the cargo space foryour cargo, not a bulky, heavy subwoofer box. This Bass Slammer is anacoustically-designed, non-resonant, airtight enclosure, with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle's acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look, and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderDetails:Enclosure loaded with 2 MTX Audio Thunder4500 10" Subwoofers(pre-installed)Power Handling: 450 Watts RMSImpedance: 4Ohms (internally wired in parallel to provide a single 4 Ohm input)Custom-fit, molded, textured, loaded subwoofer enclosure - designed fora perfect fit in your vehicleConstructed of molded high-density polyethylene resin, which dampensresonance (cabinet "ping") and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding postsIncludes all hardware for mounting thewoofer and the enclosureColor: Black/Ebony (matches factory tool kit color)Enclosure Type: Sealed (ac NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com's description field.

The PowerDsine 9000G family is designed specifically to power 802.11n access points, PTZ and dome network cameras, video phones, thin clients and other Ethernet end terminals that require high power.

Cable, Subwoofer

Type: Standard ATX Design Brand: Kentek Maximum Power: 450W Fans: 1 Dimension: 5.9"(W)x3.4"(H)x5.5"(D) fit Standard ATX Input / Output: Input: 115-230V (Manual select, international compatible) Output: +3.3V 16A, +5V 18A, +12V 26A, -12V 0.5A, +5VSB 2.0A Connectors: 20-pin/ 24-pin Switch-able x1 (For both 20 pin and 24 pin motherboard).SATA pin X 2 P4 4 pin x1 Floppy 4 pin x1 Peripheral 4 pin x2 *Above are all the connectors included in this power supply. your system may not need them all. it is fine to leave unused connectors unplugged. Hold-up Time: 16ms minimum with full load 115 VAC/60 HZ Efficiency: > 70% Over Voltage Protection: YES Input Voltage: 100-120 vac / 200-240 vac Input Frequency Range: 50 / 60hz Output: 700 Watt +3.3V 22A, +5V 22A, +12V1 21A, +12V2 21A, -12V 0.5A, +5VSB 2A MTBF: >100, 000 Hours (11 years & 2 months) * Excludes the life of the fan Approvals: SA, CB, FCC, TUV

GudCraft WG450 model is 450W 12 volt Wind Generator. Fresh 2011 Version just shipped from the factory. This is the latest design with 5-new blades. This item is new in the factory unopened box. Comes with instruction manual and all warranty information (1 year warranty from your purchase date)