Shopping Search

No Description

This 450-470 Mhz Maxrad black finish NMO antenna includes 17' of RG58 coax. It is a super flexible design that protects the .062 diameter rod against damage that can be caused by limited vehicle height clearance. They also include a rubber seal gasket to prevent water leakage. This listing is for the antenna and the 3/4" NMO mounting kit. It installs in a 3/4" I.D. hole in a roof, trunk lid or other level body panel and can be used for scanning monitor receivers that mate with a PL-259 coax connector. It can be adapted to TNC, BNC, N or just about any other style connection with an adapter (not included). Manufacturer PCTEL Maxrad Model # MUF4500 Product Description 450-470 MHz, Unity Frequency (MHz) 450-470 Product Narrative Unity gain quarter wave antenna Gain (dB) Unity Maximum Power ( Watts 150 Whip Length (In.) 7 3/8" Whip Material 17-7PH Stainless steel Black Mount Type NMO Style Cable 17 RG58 Connector PL259 (solder type) Warranty 2 Years Manufacturer PCTEL Maxrad Model # MUF4500 Product Description

Design Features: High efficiency. Low battery voltage alarm. Protections: input low voltage, input over voltage, over temperature, over load, short circuit. Low idle power draw. Built-in electronic GFCI. Optional remote control (sold separately): Model RC-15. Comes with pin-type battery cable lugs. OUTPUT: Power, Continuous 600 Watts. Power, Surge (for <1 sec) 1000 Watts. Output Voltage 120 VAC +/- 3%. Output Frequency 60 Hz. Output Voltage Waveform Pure Sine Wave. Total Harmonic distortion < 3%. INPUT: Input Voltage 21.4 to 33 VDC. Input Current at No Load < 450 mA. LOW INPUT VOLTAGE WARNING ALARM 21.4 V. LOW INPUT VOLTAGE Shut-down 20 V. High Input Voltage Shut-down 33 V. Operating Ambient Temperature 0 to 40ºC +/- 5ºC. Peak Efficiency 85%. COOLING Temperature Controlled Fan. DC INSTALLATION KIT (DC-1000-KIT). CONNECTIONS: Input Tubular type screwdown terminals. Output 2 x Standard North American Outlet (NEMA 5-15R). DC Side Input Fuse 20A x 2. REMOTE RC-15 (optional).

500w Grid Tie Solar Panel Power Inverter DC24-52V to AC INTRODUCTION: SGPV (Small Grid Tie Photovoltaic System) Th only plug and play small grid tie photovoltaic system The stackabl e small grid tie photovoltaic system INSTALLATION : The individual system of SGPV is shown in Figure 1. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it. Connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Figure 1 ASGPV SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV to the grid, this will construct high-power grid-tie system. Electrical Specifications: Model SUN-500G Normal AC Output Power 450W Maximum AC Ou

500w Grid Tie Solar Panel Power Inverter DC24-52V to AC INTRODUCTION: SGPV (Small Grid Tie Photovoltaic System) Th only plug and play small grid tie photovoltaic system The stackabl e small grid tie photovoltaic system INSTALLATION : The individual system of SGPV is shown in Figure 1. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it. Connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Figure 1 ASGPV SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV to the grid, this will construct high-power grid-tie system. Electrical Specifications: Model SUN-500G Normal AC Output Power 450W Maximum AC Ou

Go Power! 300-Watt Pure Sine Wave Inverter takes 24 Volt DC battery power and converts it to an exact replica of AC household power. This inverter is guaranteed to run any load within its-Wattage range and is backed by a 2 year warranty. It has two GFCI outlets and includes cables to connect to the battery with ease as long as the load is not greater then 300-Watt, this inverter will run it. This device can surge to 450-Watt and contains all the required instructions.

Go Power! 300-Watt Pure Sine Wave Inverter takes 12 volt DC battery power and converts it to an exact replica of AC houshold power. It is guarenteed to run any load within their wattage range and has a 2 year warranty. This inverter has two GFCI outlets and includes cables to connect to the battery with ease. As long as the load is not greater then 300 watt this inverter will run it and the GP-SW300-12 can surge to 450 watt as well as contains all instructions required.

Design Features. High efficiency. Low battery voltage alarm. Protections: input low voltage input over voltage over temperature over load short circuit. Low idle power draw. Built-in electronic GFCI. Optional remote control (sold separately): Model RC-15. Comes with pin-type battery cable lugs. OUTPUT. Power Continuous 600 Watts. Power Surge (for <1 sec) 1000 Watts. Output Voltage 120 VAC +/- 3%. Output Frequency 60 Hz. Output Voltage Waveform Pure Sine Wave. Total Harmonic distortion < 3%. INPUT. Input Voltage 21.4 to 33 VDC. Input Current at No Load < 450 mA. LOW INPUT VOLTAGE WARNING ALARM 21.4 V. LOW INPUT VOLTAGE Shut-down 20 V. High Input Voltage Shut-down 33 V. Operating Ambient Temperature 0 to 40C +/- 5C. Peak Efficiency 85%. COOLING Temperature Controlled Fan. DC INSTALLATION KIT DC-1000-KIT. CONNECTIONS. Input Tubular type screwdown terminals. Output 2 x Standard North American Outlet (NEMA 5-15R). DC Side Input Fuse 20A x 2. REMOTE RC-15 (optional). Dimensions: 7.5 L x 4.1 W x 1.2 H.

Go Power! 300-Watt Pure Sine Wave Inverter takes 24 Volt DC battery power and converts it to an exact replica of AC household power. This inverter is guaranteed to run any load within its-Wattage range and is backed by a 2 year warranty. It has two GFCI outlets and includes cables to connect to the battery with ease as long as the load is not greater then 300-Watt, this inverter will run it. This device can surge to 450-Watt and contains all the required instructions.

Go Power! 300-Watt Pure Sine Wave Inverter takes 12 volt DC battery power and converts it to an exact replica of AC houshold power. It is guarenteed to run any load within their wattage range and has a 2 year warranty. This inverter has two GFCI outlets and includes cables to connect to the battery with ease. As long as the load is not greater then 300 watt this inverter will run it and the GP-SW300-12 can surge to 450 watt as well as contains all instructions required.

The Go Power! 300 watt pure sine wave inverter takes 24 volt DC battery power and converts it to an exact replica of AC houshold power. The Go Power! pure sine wave inverters are guarenteed to run any load within their wattage range. The Go Power! pure sine wave 300 watt inverter has a 2 year warranty. This inverter has two GFCI outlets and includes cables to connect to your battery with ease. As long as the load is not greater then 300 watts this inverter will run it. The GP-SW300-24 can surge to 450 watts. All instructions are provided.