Shopping Search

Up for sale is a Duct Heater stock # DH500. This item is Brand New in the Package. This is a Electric Heat Re-String Kit. Rated at 5 kw (5000 Watts)240 V, 3750 Watts 208 Volts. Included in the package is : 4 Ceramic Insulators 4 Nuts 4 Washers 1 300*F In-Line Fuse Link Coil is 3/8" OD. Screw solder onto each end, 10-32" x 1-3/4" Long. Minimum stretch length is 40" Maximum is 125" Primarily for all air-over heat applications: duct heaters, furnaces, auxiliary inserts in heat pumps, etc. We stock

ELECTRIC FLOOR WARMING MAT SYSTEM used to heat tile flooring. The system is designed to heat the designated square footage when installed in mortar under tile or masonry flooring. The heating element is spaced 6-7" apart across the heated area. This allows for simple coverage of any shaped area. The heating element is less than 1/8" thick, so the rise in flooring height is negligible. This system is BRAND NEW and manufactured by GudCraft brand. We offer a 20-year warranty on its product. Product Life is 50 years.

Shop for Electrical at The Home Depot. The 5, 500-Watt Direct Mount Racking System (Curved tile) is ideal for installation on Curved tile sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on curved tile roofs.

Features ceramic body, brass thread, high voltage, low dissipation factor . This high voltage ceramic capacitor is great for high voltage power supplies, lasers, lightning arresters, voltage distribution systems, electron microscopes, synchroscopes and more. Threaded type is easy to install.

Shop for Electrical at The Home Depot. The 4, 500-Watt Direct Mount Racking System (Curved tile) is ideal for installation on Curved tile sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on Curved tile roofs.

Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods.

Watts 2 740 Pressure Relief Valve, 2x21/2In5, 250, 000 btu ZX Watts 2 740 Pressure Relief Valve, 2x21/2In5, 250, 000 btu Pressure Relief Valve, Inlet/Outlet 2 x 2 1/2 In, FNPT Connection, Material of Construction Iron, Preset Setting 30 PSI, Pressure Range Pressure Range 5 PSI Intervals Between 30 to 75 PSI, Preset by Factory, Disc Material Buna, Spring Material Brass, Seat Material Non-Metallic Disc To Metal, BtuH Rating 5, 250, 000, Temp Range 250 F, Height 11 5/8 In, Length 6 3/4 In, Standards ASME, Military Spec MIL-V-18634B, Type I , Class 3A, Style A, Bronze Body This listing is for a New / Surplus Stock Watts 2 740 Pressure Relief Valve, 2x21/2In5, 250, 000 btu.

Shop for Electrical at The Home Depot. The 3, 500-Watt Direct Mount Racking System (Curved tile) is ideal for installation on curved tile sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on curved tile roofs.

Electric floor warming system used to heat tile flooring. The system is designed to heat the designated square footage when installed in mortar under tile or masonry flooring. The heating element is spaced 6-7" apart across the heated area. This allows for simple coverage of any shaped area. The heating element is less than 1/8" thick, so the rise in flooring height is negligible. We offer a 20-year warranty on its product. Product Life is 50 years.

Watts 100XL 3/4" Temperature Pressure Relief Valve NEW MODEL NUMBER: 100XL, 150 PSI DESCRIPTION: Thermo Bonded Protective Coating on Thermostat. AGA Rating 100, 000 BTU/HR. Combined two-in-one Temperature and Pressure relief valves.. Fully automatic temperature and pressure relief protection for domestic hot water supply tanks and heaters based on the latest ANSI Z21.22 listing requirements for temperature discharge capacity. For water heaters from 15, 000 to 100, 000 BTU/hr. Temperature relief 210F (99C). Pressure relief range 75 to 150 psi (5.2-10.3 bars). Standard pressure relief settings: 75 psi (517.1 kPa), 100 psi (6.9 bars), 125 psi (8.6 bars) or 150 psi (10.3 bars).

Watts 800 m4 qt 1/2"-3/4" Repair Kit Watts 1/2-3/4" Repair Part RK 800M4 B, Bonnet Assembly Kit (887700) Consist of: ? Bonnet ? Bonnet 'O'-ring ? Vent spring ? Hood & hood screws

Watts (Powers) No. 11 Regulator Product# 595ST100H! THIS IS AN WATTS No. 11 REGULATOR STILL IN THE ORIGINAL CONTAINER AND NEVER USED. Product# 595ST100H-CO8DN05 SERIAL #: N/A, 1" VALVE OVERALL DIMENSIONS: WIDTH: 7" HEIGHT: 16" OTHER DETAILS: THIS ITEM IS LOCATED AT MOUNT

Electric floor warming system used to heat tile flooring. The system is designed to heat the designated square footage when installed in mortar under tile or masonry flooring. The heating element is spaced 6-7" apart across the heated area. This allows for simple coverage of any shaped area. The heating element is less than 1/8" thick, so the rise in flooring height is negligible. We offer a 20-year warranty on its product. Product Life is 50 years.

Shop for Electrical at The Home Depot. The 8, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

Shop for Electrical at The Home Depot. The 6, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

For use in commercial and residential hydronic heating systems to provide make-up water to the boiler, and prevent backflow when supply pressure falls below system pressure. Consists of bronze Watts Model 9D backflow preventer and bronze Watts Model 1156Ffeed water pressure regulator in one pre-assembled unit. Maximum pressure: 100 psi.

Silicone sealant, 500¡F RTV high heat silicone, Forms a tough rubbery adhesive seal and maintains its flexibility at 450¡F continuously and 500¡F intermittently, Use for sealing fireplace inserts, solar panel repairs, flashings, applying ceramic tiles, Ideal for anywhere a permanent elastic seal is needed both indoors or outdoors, Adheres to most materials, Clear, 10.3 oz cartridge.

Shop for Electrical at The Home Depot. The 4, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

Shop for Electrical at The Home Depot. The 5, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

Shop for Electrical at The Home Depot. The 3, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

Shop for Electrical at The Home Depot. The 8, 500-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on flat slate tile roofs.

New Watts 100XL Temperature Pressure Relief Valve 3/4" For the past 6 years, I've been selling industrial items for various companies that are cleaning shelves of excess inventory. . All items from these companies are either new in the box or slightly used (I'll indicate if they were used). All feedbacks from the industrial auctions I've listed have been positive - bid with confidence. This auction is for a New Watts 100XL Temperature Pressure Relief Valve 3/4" Visit my other listings for more

Applications Designed for Connections from electrode holders and clamps to arc welders, bus welding box or transformer Recommended for use in shipyards, mines, and other areas where cable is subject to extreme physical abuse. Flame retardant, oil resistant, resilient, resists compression cuts and abrasion, durable handling. This cable is not suitable for in line voltage use. Improper use could be hazardous to personnel and could damage equipment. Construction Conductor is annealed rope stranded bare copper conductor per ICEA S-75-381. Insulation is Ethylene Propylene Rubber (EPR) type EP, Class 45, 105 C. Table 50.55 of UL.1581. Separator between conductor and jacket is crepe paper. Voltage is 600 Volts spark tested. Standards Meets ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1. Available on Request Class M stranding Colors Hypalon or Neoprene Insulation UL or CSA Listed Custom Cut Lengths Notes Nominal resistance of conductor acc to ICEA S-75-381 Class K Specifications Size AWG 4/0 Nominal Stranding Class K 2065/30 Nominal Resistance of Conductor at 25°C ?/1000 Ft. 0.0530 Nominal Thickness of Insulation (Inches) 0.079 Nominal O.D. (Inches) 0.716 Copper Content Lbs./1000 Ft. 687 Weight Per MFT 760 Lbs

Shop for Electrical at The Home Depot. The 5, 500-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on flat slate tile roofs.

Shop for Electrical at The Home Depot. The 6, 500-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on flat slate tile roofs.

Shop for Electrical at The Home Depot. The 9, 500-Watt Adjustable Tilt-Mount Racking System (Curved Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on curved tile roofs.

Shop for Electrical at The Home Depot. The 3, 500-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on flat slate tile sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on flat slate tile roofs.

Shop for Electrical at The Home Depot. The 4, 500-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on Flat slate tile sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on Flat slate tile roofs.

Shop for Electrical at The Home Depot. The 8, 000-Watt Adjustable Tilt-Mount Racking System (Flat Slate Tile) is ideal for installation on shallow pitch roofs. This adjustable tilt racking system is built from aluminum and stainless steel for years of all-weather service. The installed array allows for an additional 17 ? 46 degrees of additional tilt over the direct mount racking system. The included hardware allows for easy installation on flat slate tile roofs.

Shop for Electrical at The Home Depot. The 9, 000-Watt Direct Mount Racking System (Flat slate tile) is ideal for installation on sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on flat slate tile roofs.