Shopping Search

You are bidding on a 2" Slip X 2" Pump Union with Gasket or Oring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other side. It will Glue to a 2" Pipe or Slice and screw to a 2" Wetend fitting. Don't be confused we also offer a Pump union that is 1 1/2" Slip X 1 1/2" Pump Wetend or a 2" Slip X 2 1/2" pump Union. If your plumbing is 2" and your Pump Wetend Thread is 2" this part is correct. Also if your Pump is 2" and Your Plumbing is 1 1/2" You can use a 1 1/2" To 2" Bushing to make them fit together. This version is the most popular version. 1 1/2" x 1 1/2" is 2nd most popular and 2" X 2 1/2" is 3rd most popular. The pictures also show a wetend so you can see what this part screws to. The Wetend is NOT Included in the sale.This part is used in hot tubs to plumb to a Pump Wetened Fitting.

You are bidding on a 1 1/2" Spigot X 1 1/2" Slip Slice gate Valve and 1 1/2" Heater Union with Gasket or Oring that matches Union. The Valve recieves a 1 1/2" pipe or fitting on one side and then slips inside of a 1 1/2" fitting on the other side. It will slip inside of the Heater union and glue and screw to a 1 1/2" Heater Flange fitting. This setup is usually found in a hot tub that is 115v Plug in only. Measure the Heater flange and be sure it is about 2 3/8 across the end of the heater tube flange. Don't be confused we also offer a slice valve with a Pump union look at where it it attached in the spa if it is attached to the Heater and the plumbing is 1 1/2" and the Heater Split Nut threads are 1 1/2" then this part is correct. This part is used in hot tubs to stop the water so you could service the heater or the pump without draining the tub.

You are bidding on a 2"Slip X 2"Heater Union with Gasket or Oring that matches Union. The Union recieves a 2"pipe or fitting on one side and then Screws to a 2" Heater Flange Split Nut on the other side.It will Glue to a 2" Pipe or Slice and screw to a 2"Heater Flange fitting. Don't be confused we also offer a Heater union that is 1 1/2" Slip X 1 1/2" to Heater or a 1 1/2" Slip X 2" Heater Union. If your plumbing is 2" and your heater is 2"this part is correct. This version is the most popular

You are bidding on a 1 1/2"Slip X 1 1/2"Heater Union with Gasket or Oring that matches Union. The Union recieves a 1 1/2"pipe or fitting on one side and then Screws to a 1 1/2" Heater Flange Split Nut on the other side.It will Glue to a 1 1/2" Pipe or Slice and screw to a 1 1/2"Heater Flange fitting. Don't be confused we also offer a Heater union that is 1 1/2" Slip X 2" to Heater or a 2" Slip X 2" Heater Union. If your plumbing is 1 1/2" and your heater is 1 1/2"this part is correct.This is us

You are bidding on a 1 1/2"Slip X 2"Heater Union with Gasket or Oring that matches Union. The Union recieves a 1 1/2"pipe or fitting on one side and then Screws to a 2" Heater Flange Split Nut on the other side.It will Glue to a 1 1/2" Pipe or Slice and screw to a 2"Heater Flange fitting. Don't be confused we also offer a Heater union that is 1 1/2" Slip X 1 1/2" to Heater or a 2" Slip X 2" Heater Union. If your plumbing is 1 1/2" and your heater is 2"this part is correct. This version is the l

You are bidding on a 1 1/2"Slip X 1 1/2"Pump Union with Gasket or Oring that matches Union. The Union recieves a 1 1/2"pipe or fitting on one side and then Screws to a 1 1/2"Wetend(Pump) Threaded Part on the other side.It will Glue to a 1 1/2" Pipe or Slice and screw to a 1 1/2"Wetend fitting. Don't be confused we also offer a Pump union that is 2" Slip X 2"Pump Wetend or a 2" Slip X 2 1/2"pump Union. If your plumbing is 1 1/2" and your Pump Wetend Thread is 1 1/2"this part is correct. Also if

2" FLOW-THRU HEATER HOUSING SPLIT NUT "BONUS O-RING" WE INCLUDE A BRAND NEW O-RING HEATER HOUSING GASKET Description Brand New 2" flow-thru heater housing split nut union. It is the most popular split nut union, and made to replace heater flange nuts. It has a large flange for stainless steel housings, and this split nut is for heaters only. This split nut will fit; Allied Innovations heater housing, Balboa, Cal Spas, Gecko, Gulf Coast, Hydro-Quip, and others with metal 2" heater assemblies. We are also including a Brand New O-Ring Heater Housing Gasket to help ensure a water tight seal. MEASUREMENTS Overall Diameter of Split Nut 3-3/8" Flange Side Opening 2-1/4" Outside Diameter Gasket 2-15/16" Inside Diameter Gasket 2-1/8"

You are bidding on a Standard 2"Heater or Pump Union Gasket. The gasket is 2 7/8" across and fits most unions but there a few exceptions. If you order this gasket and the ridge doesn't fit you union you can trim the ridge off and use it as a flat gasket. This part is used in hot tubs between a heater or pump union and the heater or Pump.We have plenty of these. Buy with caution I Do Not Accept returns! I do accept Paypal only. The Lower 48 states is Free.I will ship worldwide Shipping is Calcul

You are bidding on a 1 1/2" Spigot X 1 1/2" Slip Slice gate Valve and 1 1/2 X 2"Heater Union with Gasket or Oring that matches Union. The Valve recieves a 1 1/2"pipe or fitting on one side and then slips inside of a 1 1/2" fitting on the other side.It will slip inside of the Heater union 1 1/2" Inlet and glue and screw to a 2"Heater Flange fitting. Don't be confused we also offer a slice valve with a Pump union look at where it it attached in the spa if it is attached to the Heater and the plum

You are bidding on a 2" Spigot X 2" Slip Slice gate Valve and 2"Heater Union with Gasket or Oring that matches Union. The Valve recieves a 2"pipe or fitting on one side and then slips inside of a 2" fitting on the other side.It will slip inside of the Heater union and glue and screw to a 2"Heater Flange fitting. Don't be confused we also offer a slice valve with a Pump union look at where it it attached in the spa if it is attached to the Heater and the plumbing is 2" and the Heater Split Nut t

poolspasuppliesonline Store Check Us Out Online! 281-933-3466 Got Questions? Feel free to call now! Hot Tub Pump Union 2"Slip x 2"Slip Union Assembly 20557

You are bidding on a 1 1/2" Spigot X 1 1/2" Slip Slice gate Valve and 1 1/2" Pump Union with Gasket or Oring that matches Union. The Valve recieves a 1 1/2"pipe or fitting on one side and then slips inside of a 1 1/2" fitting on the other side.It will slip inside of the pump union and glue and screw to a 1 1/2" pump fitting. Don't be confused we also offer a slice valve with a heater union look at where it it attached in the spa if it is attached to the pump and the plumbing is 1 1/2" and the p

You are bidding on a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits most unions but there a few exceptions. If you order this gasket and the ridge doesn't fit you union you can trim the ridge off and use it as a flat gasket. This part is used in hot tubs between a heater or pump union and the heater or Pump.

You are bidding on a 2" Spigot X 2" Slip Slice gate Valve and 2" Pump Union with Gasket or Oring that matches Union. The Valve recieves a 2"pipe or fitting on one side and then slips inside of a 2" fitting on the other side.It will slip inside of the pump union and glue and screw to a 2" pump fitting. Don;t be confused we also offer a slcie valve with a heater union look at where it it attached in the spa if it is attached to the pump and the plumbing is 2" and the pump wetend threads are 2" th