Shopping Search

GRKs RSS Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.RSS screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screws drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS may also be used to install wire diamond mesh for stucco buildings.The #30 Star Drive will deliver approximately 650 lbf of energy, eliminating the need to drill a pilot hole.The RSS screw is the only lag screw replacement of its kind.

PLEASE SIGN UP FOR OUR NEWSLETTER ABOVE! ITEM DESCRIPTION: MAGNETIC DOOR STOP HOLDER NEW! VERY STURDY...ABLE TO HOLD A DOOR UP TO 300 LBS CONSTRUCTED OF STEEL, STAINLESS STEEL ZINC ALLOY NICE SATIN CHROME FINISH CAN EITHER BE FLOOR OR WALL MOUNTED VERY HANDY FOR HOME OR OFFICE USE 3 MOUNTING SCREWS HIDDEN UNDER COVER APPROX. 3" HIGH, MAGNETIC DISC IS 1-3/8" DIAMETER TO OPERATE: *OPEN DOOR UNTIL IT ENGAGES WITH THE DOOR STOP HOLDER. *MAGNET ON THE DOOR STOP HOLDER WILL KEEP DOOR OPEN. *TO DISENG

No Description

Handy Electrical Box, Number Of Gangs 2, Bracket Type Ts, Capacity 30.3 Cu-in, Material Of Construction Galvanized Steel, No Of 1/2 In Back Knockouts 3, No Of 3/4 In Back Knockouts 2, No Of 3/4 In Side Knockouts 6, Depth 2 1/8 In, Length 4.00 In, Width 4.00 In, Standards Ul

GRKs RSS Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.RSS screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screws drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS may also be used to install wire diamond mesh for stucco buildings.The #30 Star Drive will deliver approximately 650 lbf of energy, eliminating the need to drill a pilot hole.The RSS screw is the only lag screw replacement of its kind.

No Description

HANDY BOX 'A' 4X2 1.5"DP .5KOS Three 1/2" knockouts (sides), two 1/2" knockouts (ends) and three 1/2" knockouts (bottom). 'A' style bracket for wood or metal positions handy box securely against face and side of stud. Acceptable for use in 2-hour rated walls. UL 514-A listed, File E195978. Manufacturer : RACO MPN: 661 UPC: 050169006610 Internal SKU: 6303788 Pack Size: 1 Our Price: $10.42 WELCOME Welcome to Vanguard Wholesale! Thank you for visiting our listing! As you browse this listing, pleas

Handy Electrical Box, Number Of Gangs 2, Bracket Type Ts, Capacity 30.3 Cu-in, Material Of Construction Galvanized Steel, No Of 1/2 In Back Knockouts 5, No Of 1/2 In Side Knockouts 9, Depth 2 1/8 In, Length 4.00 In, Width 4.00 In, Standards Ul

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

Raco 0671 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Face Mount Bracket, WeldedRaco 0671 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Face Mount Bracket, Welded Features:; Welded design allows for more working room inside box; A style bracket positions handy box securely against face and side of studRaco 0671 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Face Mount Bracket, Welded Specifications:; Box Type: RACO Steel Boxes & Covers; Box Family: Handy/Utility Boxes, Covers, Extension Rings; Box Category: Handy/Utility Boxes - For Conduit; Category: Handy Box; Wiring System: 2-1/8"; Box Depth: 3, 1/2"; Side Knockout(s): 3, 1/2"; Bottom Knockout(s): 2, 1/2"; Bracket Type: A, For wood or metal studs; Bracket Setback: 5/8"; Drawn or Welded: Welded; Cubic Inch Capacity: 16.5; UPC Number: 050169006719; Product UPC-A Labeled: Yes; Minimum Pack Qty.: 50; Carton UPC Bar Code: 050169996713; Inner Leaf 2 of 5 Bar Code: 30050169006710; Unit Carton Quantity: 50; Ship Carton Length (In.): 20.25; Ship Carton Width (In.): 10.25; Ship Carton Height (In.): 8.50; Weight (Per/C): 79.5; Pallet Quantity: 2500; Fire Resistance: Acceptable for use in 2-hour rated walls; Dimension A: 2-1/8"; Dimension B: 7"; Dimension C: 2-3/8"; Three 1/2" knock outs on sides; Two 1/2" knock outs on ends; Three 1/2" knock outs on bottom; A bracket that positions against side and face of stud; UL listed; Steel; 2-1/8" x 7" x 2-3/8"

GRKs RSS Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.RSS screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screws drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS may also be used to install wire diamond mesh for stucco buildings.The #30 Star Drive will deliver approximately 650 lbf of energy, eliminating the need to drill a pilot hole.The RSS screw is the only lag screw replacement of its kind.

1 Lot of 5 new uncut Schlage Securekey Blue key blanks.The blue is used to re-key the locks when needed.You can ID this lock by the + symbol on the plug above the key hole.If you have any questions please email me.Check out my other items !Be sure to add me to your favorites list !

Shop for Hardware & Fasteners at The Home Depot. GRK Fasteners offers top quality, multi-purpose, built to last screws. Our patented W-Cut Thread Design acts like a saw-blade by cutting through material fibers instead of pushing them aside. This reduces amount of torque required, maintains high pull out strength and helps prevent material splitting. Our ZipTip is designed for fast starts on fibrous materials and our Climatek coating has been independently tested and approved for treated wood products. Our fasteners come with a Limited Lifetime Warranty!

No Description

Sold as 6 UNITS at $3.83 per unit. (1 unit = each.) 1-7/8" deep. 13.0 cubic inch capacity. 3 side knockouts 1/2". 2 end knockouts 1/2". 3 back knockouts 1/2". A bracket for mounting box against face and side of spur. Drawn steel construction. UL listed. Bulk. Manufacturer number: 661. SKU #: 30338. Country of origin: (TBA). Distributed by Raco, Inc.

Raco 0678 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Bracket, WeldedRaco 0678 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Bracket, Welded Features:; Welded design allows for more working room inside box; TS bracket features gauging tabs and recessed nailing spursRaco 0678 4" x 2" Handy Box, 2-1/8" Deep, 1/2" End Knockouts, Wood/Metal Stud Bracket, Welded Specifications:; Box Type: RACO Steel Boxes & Covers; Box Family: Handy/Utility Boxes, Covers, Extension Rings; Box Category: Handy/Utility Boxes - For Conduit; Category: Handy Box; Box Depth: 2-1/8"; Side Knockout(s): 3, 1/2"; Bottom Knockout(s): 3, 1/2"; End Knockout(s): 2, 1/2"; Bracket Type: TS, For wood or metal studs; Bracket Setback: 1/2"; Drawn or Welded: Welded; Cubic Inch Capacity: 16.5; UPC Number: 050169006788; Steel handy box, also called utility box are used for convenience outlets, switch boxes, or small junction boxes; May be used with metal or wood studs; 16.5 cubic inches; TS bracket, 1/2" setback; Three 1/2" knockouts on the sides; Two 1/2" knockouts on the ends; Three 1/2" knockouts on the bottom; 2-1/8" x 7" x 2-3/8"

Shop for Hardware & Fasteners at The Home Depot. GRK Fasteners offers top quality, multi-purpose, built to last screws. Our patented W-Cut Thread Design acts like a saw-blade by cutting through material fibers instead of pushing them aside. This reduces amount of torque required, maintains high pull out strength and helps prevent material splitting. Our ZipTip is designed for fast starts on fibrous materials and our Climatek coating has been independently tested and approved for treated wood products. Our fasteners come with a Limited Lifetime Warranty!

Handy boxes also called utility boxes are used for convenience outlets switch boxes or small junction boxes. They are popular for surface-mounted wiring. The NEC requires that surfaces-mounted wiring be protected with a protective covering such as EMT conduit. Bracketed boxes may be used on metal or wood studs. 13.0 cubic inches. 1-.88 deep. Length: 1.94. Width: 7. Height: 2.38

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

GRK Trim Head Screws ACQ Approved 100 per pack White 8 x 2 1/2" Length Techincal Data: ICC Report # ESR-3201 Finishing Trim Head Screw Techincal Data: ICC Report # ESR-3201 GRK's FIN/Trim Head screws are an excellent choice for most fine carpentry applications and more. They are also ideal for the installation of window extension jambs. Our FIN/Trim Head screws have the smallest screw head on the market; With sizes available from 1"1/4(30 mm) to 5"(125 mm), users have plenty of choice.

R4 Multi Purpose Screw - Handy Pak 50 Screws per package 10" Length x 12/14 Uses a #25 Star Bit Galvanized for Pressure Treated Lumber This Screw is great for Laminating Beams.View our R4 Promotional Video Techincal Data: ICC Report # ESR-3201 Multi Purpose Screw Self-tapping, countersink head W-Cut thread design, ZipTip Climatek coated For use in wood, particle-board, cement fibreboard, plastic, sheet metal. 3b 02187 50 ea

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

The PHEINOXâ"¢ FIN/Trimâ"¢ Screw is made of hardened Stainless Steel and has a lifetime warranty against staining and rusting. The screw is self-tapping with the Zip-Tipâ"¢, W-Cutâ"¢ and the smallest screw head available. The FIN/Trimâ"¢ is recommended for fine carpentry and all trim applications. FIN/Trimâ"¢ screws are also available in Climatekâ"¢ coated and White FIN/Trimâ"¢.

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

4" x 1-7/8" Deep Steel, A Bracket Handy Box, 8 Each 1/2" Knockouts, 13 CUIN.

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.

The PHEINOXâ"¢ FIN/Trimâ"¢ Screw is made of hardened Stainless Steel and has a lifetime warranty against staining and rusting. The screw is self-tapping with the Zip-Tipâ"¢, W-Cutâ"¢ and the smallest screw head available. The FIN/Trimâ"¢ is recommended for fine carpentry and all trim applications. FIN/Trimâ"¢ screws are also available in Climatekâ"¢ coated and White FIN/Trimâ"¢.

No Description