Shopping Search

The listing is for one pair of SMOKE lens LED flush mount turn signals: 2 wires only - not for day time running lights. Color of light is amber These flush mount filler cap signals are easy to install, no drilling or cutting involved they can be ''bolt-on'' installed in 5 minutes, they will fill holes in your fairings left from the stock signals removed Measurement: 2 inch x 1.5 inch (longest point ). thickness: 0.85 inch (thickest point) To fit Honda 2001-2005 SUZUKI GSXR 600 2000-2005 SUZUKI GSXR750 2001-2004 SUZUKI GSXR1000 Note: 1.They comes with oe connectors, pins are not pushed in the connector 2. If your bike currently uses standard bulbs, you will need a load resistor to bring the flash rate down to normal. NOT D.O.T APPROVED, DON NOT USE when D.O.T is required.

The listing is for one pair of black billet bar ends engraved with "GSXR", will fit Suzuki GSXR 600 1992-2005 (require modification to fit for 2006-2011), Suzuki GSXR 750 1996-2005(require modification to fit for 2006-2011) Suzuki GSXR 1000 2001-2005 (require modification to fit for 2006-2011), Suzuki GSXR 1100 1989-1998, Suzuki Hayabusa 1999-2011, Suzuki Katana 600 1989-2008, Suzuki Katana 750 1989-2008, Suzuki SV650S 2001-2008 (not SV650), Suzuki SV1000S 2003-2006 (not SV1000), Suzuki TL1000S 1997-2001, Suzuki Bandit 1200 1997-2000. bar end dia: 1.25"

High quality Black billet aluminum Racing REAR Foot Pegs (Left & Right Sides) Easy installation! Material: High Quality Billet Aluminum Color: Black Condition: 100% Brand New Fitment: 1997-1999 Suzuki GSXR 600, 1996-1999 Suzuki GSXR 750, 1997-1999 Suzuki TLR1000S Part Number: FP015-Black Note: Some stock foot pegs are permanently fixed. If so, remove the entire footrest, secure and drill the mounting pin, then replace the pegs with this set.

Specifications:High Quality Billet Aluminum Swingarm Spools/Sliders(Left & Right Sides) These swingarm spools are designed to protect your swingarm & axle nut in the event of a crash.They can also be used with a lift stand to lift the rear wheel off of the ground for changing your tire or oiling your chain.Easy installation! bolt straight into your swingarm (mounting bolts are included). Material: High Quality Billet Aluminum Color: ChromeCondition: 100% Brand New Quantity: 1 pair (Left & Right)Fitment: 2003-2007 Honda CBR 600RR 2002-2003 Honda CBR 954RR 2004-2007 Honda CBR 1000RR 1992-2007 Suzuki GSXR 600 1991-2007 Suzuki GSXR 750 2001-2007 Suzuki GSXR 1000 1993-1998 Suzuki GSXR 1100 1999-2010 Suzuki Hayabusa

High quality Chrome billet aluminum Racing REAR Foot Pegs (Left & Right Sides) Easy installation! Material: High Quality Billet Aluminum Color: Chrome Condition: 100% Brand New Fitment: 1997-1999 Suzuki GSXR 600, 1996-1999 Suzuki GSXR 750, 1997-1999 Suzuki TLR1000S Part Number: FP015-Chrome Note: Some stock foot pegs are permanently fixed. If so, remove the entire footrest, secure and drill the mounting pin, then replace the pegs with this set.

Specifications: High Quality Mirror Base Plate These can also be used as stand-alone block-off plates.Instructions: Not IncludedProfessional Install is RecommendedMaterial: High Quality Billet AluminumColor: BlackEngraving: GSXR LogoBolt Hole Diameter: 6mmSize: 59mm x 21mmQuantity: 1 Pair (Left & Right)Condition: 100% Brand New Fitment: 1992-2007 Suzuki GSXR 600 1991-2007 Suzuki GSXR 750 2001-2007 Suzuki GSXR 1000 1993-1998 Suzuki GSXR 1100

Blue Anodized Aluminum Suzuki Bar-Ends with Laser Etched "GSXR" Logo - Machined out of Billet Aluminum- Anodized for a Durable Finish.  - Laser Engraved Logo- Designed to fit like OEM Includes everything Pictured, Several colors available, the color in the heading & Main Picture is the one you will receive.Check my Amazon Store Front for more Styles/Colors Recommended for all GSX-R but will fit:  Suzuki GSXR600 1992-2010GSXR750 1996-2010GSXR1000 2001-2010GSXR1100 1989-1998 TL1000S 1997-2001TL1000R 1998-2003 Bandit 1200 1997-2000SV650  2001-2008SV1000S 2003-2006 Suzuki Hayabusa 1999-2010Katana 600 1989-2006Katana 750 1989-2006 (Some models may require a shorter bolt or using your OEM Bolt)

Suzuki GSXR Brake & Clutch Levers - Silver Fits: 06-11 Suzuki GSXR 600 06-11 Suzuki GSXR 750 05-06 and 09-11 Suzuki GSXR 1000 Easy To Install Affordable Look Awesome High Tensile Strength Aluminum construction   Lever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.  

Suzuki GSXR Brake & Clutch Levers - Gold Fits: 06-11 Suzuki GSXR 600 06-11 Suzuki GSXR 750 05-06 and 09-11 Suzuki GSXR 1000 Easy To Install Affordable Look Awesome High Tensile Strength Aluminum construction   Lever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.  

Suzuki GSXR Brake & Clutch Levers - Carbon Color Fits: 06-11 Suzuki GSXR 600 06-11 Suzuki GSXR 750 05-06 and 09-11 Suzuki GSXR 1000 Easy To Install Affordable Look Awesome High Tensile Strength Aluminum construction   Lever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.  

Suzuki GSXR Brake & Clutch Levers - Blue Fits: 06-11 Suzuki GSXR 600 06-11 Suzuki GSXR 750 05-06 and 09-11 Suzuki GSXR 1000 Easy To Install Affordable Look Awesome High Tensile Strength Aluminum construction   Lever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.  

Suzuki GSX-R Motorcycle Hand Grips - Silver Give your GSX-R that added touch with our GSX-R Grips. They are made of a Strong, Durable Polymer that will stand up to constant abuse. In addition they offer Strategically located Ribs to give you with extra grip for easy and accurate throttle manipulation. Fits: All Suzuki GSX-R Series (also fits many other Motorcycles) GSX-R 600 GSX-R 750 GSX-R 1000 GSX-R 1100 GSX-R 1300 Hayabusa Easy To Install Look Awesome Treated to Withstand UV Damage Smooth on Top for Looks Grippy on Bottom for Comfort Reduce Vibration Please Note: On some models there may be a ridge on the OEM throttle tube, this must be removed in order to install any aftermarket grip.

Suzuki GSX-R Motorcycle Hand Grips - Gold Give your GSX-R that added touch with our GSX-R Grips. They are made of a Strong, Durable Polymer that will stand up to constant abuse. In addition they offer Strategically located Ribs to give you with extra grip for easy and accurate throttle manipulation. Fits: All Suzuki GSX-R Series (also fits many other Motorcycles) GSX-R 600 GSX-R 750 GSX-R 1000 GSX-R 1100 GSX-R 1300 Hayabusa Easy To Install Look Awesome Treated to Withstand UV Damage Smooth on Top for Looks Grippy on Bottom for Comfort Reduce Vibration Please Note: On some models there may be a ridge on the OEM throttle tube, this must be removed in order to install any aftermarket grip.

Suzuki GSX-R Motorcycle Hand Grips - Red Give your GSX-R that added touch with our GSX-R Grips. They are made of a Strong, Durable Polymer that will stand up to constant abuse. In addition they offer Strategically located Ribs to give you with extra grip for easy and accurate throttle manipulation. Fits: All Suzuki GSX-R Series (also fits many other Motorcycles) GSX-R 600 GSX-R 750 GSX-R 1000 GSX-R 1100 GSX-R 1300 Hayabusa Easy To Install Look Awesome Treated to Withstand UV Damage Smooth on Top for Looks Grippy on Bottom for Comfort Reduce Vibration Please Note: On some models there may be a ridge on the OEM throttle tube, this must be removed in order to install any aftermarket grip.

Suzuki Brake & Clutch Levers - Satin BlackFits: 04-05 Suzuki GSXR 600 04-05 Suzuki GSXR 750  Easy To InstallAffordableLook AwesomeHigh Tensile Strength Aluminum construction  Lever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.

High quality Black billet aluminum Racing FRONT Foot Pegs (Left & Right Sides) Easy installation! Material: High Quality Billet Aluminum Color: Black Condition: 100% Brand New Fitment: 1992-1993 Suzuki GSXR 600, 1997 Suzuki GSXR 600, 1993-1997 Suzuki GSXR 750 Part Number: FP014-Black Note: Some stock foot pegs are permanently fixed. If so, remove the entire footrest, secure and drill the mounting pin, then replace the pegs with this set.

Suzuki Brake & Clutch Levers - Carbon LookFits: 97-03 Suzuki GSXR 600 96-03 Suzuki GSXR 750 01-04 Suzuki GSXR 1000 Suzuki TL1000S 97-03 (See other auction for TLR)  Easy To InstallAffordableLook AwesomeHigh Tensile Strength Aluminum constructionLever Install: Remove Old levers. Grease Pivot Point of the New Levers. Do NOT over-tighten the Bolts, Levers are not meant to be Clamped down. Be sure that the Brake Cylinder Actuator is properly seated. As with any Motorcycle lever, OEM or Aftermarket, Test the Lever Performance BEFORE Riding. Be sure they are installed properly and allow for normal brake operation. When in doubt have a professional install the levers.

Set of Billet Aluminum Suzuki Foot-pegs. (2 Rear Passenger Foot Pegs) Color: Gold THESE ARE NOT CHEAP UNIVERSAL PEGS MADE SPECIFICALLY FOR THESE BIKES: GSXR 600 97-05 GSXR 750 97-05 GSXR 1000 01-04 TL1000S 97-03 TL1000R 98-03 SV1000/1000S 03-08 SV650/SV650S 99-08 GSXR 1300R Hayabusa 99-07  Made specifically to fit the bike models listed above (NOT UNIVERSAL) · Uses your original Bolts.  

Set of Billet Aluminum Suzuki Foot-pegs. (2 Rear Passenger Foot Pegs) Color: Red THESE ARE NOT CHEAP UNIVERSAL PEGS MADE SPECIFICALLY FOR THESE BIKES: GSXR 600 97-05 GSXR 750 97-05 GSXR 1000 01-04 TL1000S 97-03 TL1000R 98-03 SV1000/1000S 03-08 SV650/SV650S 99-08 GSXR 1300R Hayabusa 99-07  Made specifically to fit the bike models listed above (NOT UNIVERSAL) · Uses your original Bolts.  

These signals are made to fit in the OEM opening on your Fairing. No cutting, drilling or modification to the Fairing is required. (You will have to splice the wires only) These are great if you want a clean look but don't want to modify your Plastics, allowing you to revert back to stock at any time. E-11 E-Mark Certified Signals This is an LED Turn Signal, Flash Controllers are not required but recommended with this item, they are available separately. Suitable for: Suzuki 01-05 GSX-R600 Suzuki 00-05 GSX-R750 Suzuki 01-04 GSX-R1000 Suzuki 00-07 Bandit 600S Suzuki 00-05 Bandit 1200S Suzuki 06-08 Bandit 1250S Suzuki SV650 03+ S Suzuki All SV1000 S

High quality Brake Clutch Levers. Easy installation! Brake lever installs using your existing pivot, the brass sleave simply slides out. Material: High Quality Billet Aluminum Color: Carbon-Look Condition: 100% Brand New Fitment: 2004-2005 Suzuki GSXR 600 2004-2005 Suzuki GSXR 750 Quantity: 1 pair (Left & Right) Part Number: HL016-Carbon

These signals are made to fit in the OEM opening on your Fairing. No cutting, drilling or modification to the Fairing is required. (You will have to splice the wires only) These are great if you want a clean look but don't want to modify your Plastics, allowing you to revert back to stock at any time. E-11 E-Mark Certified Signals This is an LED Turn Signal, Flash Controllers are not required but recommended with this item, they are available separately. Suitable for: Suzuki 01-05 GSX-R600 Suzuki 00-05 GSX-R750 Suzuki 01-04 GSX-R1000 Suzuki 00-07 Bandit 600S Suzuki 00-05 Bandit 1200S Suzuki 06-08 Bandit 1250S Suzuki SV650 03+ S Suzuki All SV1000 S

Condition: Brand New Package Include: 2 x LED turn signal/ side markers Lens Measurement: Diameter: L 1 7/8" X W 1 1/8" (4.8cm x 2.8cm) Stalk Length: 1 1/16" Total Length with Thread: 4 1/2" Lens Color: Black LED light Color: Amber Mounting stud bolts: 10mm 2 wires connection Number of LEDs: Built in 14 delicate LED for each, total 28 LED • Heavy duty housing is made of top-rating ABS plastic. • Unique Arrow shape lens design. • Easy installation. • Ultra Bright High Intensity LEDs. • Increase Visibility and Ensure Safer Driving at Night. • Ride Your Bike With Style • Instantly Upgrade Your Bike Into A New Custom Eye Catching Look • High Quality LED with 100, 000 hour life expectancy & low power consumption, longer lasting than conventional lights. *Not D.O.T. approved. *Professionals install is strongly recommended to avoid trouble caused by inexperienced installer! *Notice: Please note that package is shipped from Hong Kong, and it normally takes 7-20 business days to receive.

Set of Billet Aluminum Suzuki Foot-pegs. (2 Rear Passenger Foot Pegs) Color: Black THESE ARE NOT CHEAP UNIVERSAL PEGSMADE SPCIFICALLY FOR THESE BIKES:GSXR 600 06-08GSXR 750 06-08GSXR 1000 05-08GSXR 1300BK B-KING 08  Made specifically to fit the bike models listed above (NOT UNIVERSAL) ·         Uses your original Bolts. ·         High Tensile Strength Aluminum Construction

Specifications:High quality Rubber Frame Plugs SetEasy installation! Snuggly fit to cover the ugly bolt holes on your bikeInstructions: not includedMaterial: Injection molded rubber compoundColor: BlackCondition: 100% Brand New Fitment: 2006 Suzuki GSXR 600 2007 Suzuki GSXR 600 2006 Suzuki GSXR 750 2007 Suzuki GSXR 750

Set of Billet Aluminum Suzuki Foot-pegs. (2 Front Rider Foot Pegs) Color: Blue MADE FOR THESE BIKES: GSXR 600 92-05 GSXR 750 88-05 GSXR 1000 01-04 TL1000S 97-03 TL1000R 98-03 SV1000/1000S 03-08 SV650/SV650S 99-08  Made specifically to fit the bike models listed above · Uses your original Bolts. · High Tensile Strength Aluminum Construction  

Set of Billet Aluminum Suzuki Foot-pegs. (2 Front Rider Foot Pegs) Color: Black MADE FOR THESE BIKES: GSXR 600 92-05 GSXR 750 88-05 GSXR 1000 01-04 TL1000S 97-03 TL1000R 98-03 SV1000/1000S 03-08 SV650/SV650S 99-08  Made specifically to fit the bike models listed above · Uses your original Bolts. · High Tensile Strength Aluminum Construction  

The list is for one pair 7/8" high quality billet Grips . Material: Billet Aluminum Color: chrome with rubber insert Condition: 100% Brand New Quantity: 1 pair (Left & Right) Size: Left: 7/8" , right 1". do not include internal throttle, buyer needs to reuse their original internal throttle Overall length is : 5.5" Internal length: 5.25" will fit all Suzuki , Honda, Kawasaki, Yamaha uses 7/8" handlebar.

The listing is for one chrome front brake fluid reservoir cap engraved with "S". It will fit: Suzuki GSXR 600 1992-2012 Suzuki GSXR 750 1988-2012 Suzuki GSXR1000 2001-2012 Material : High quality billet aluminum Installation is easy, simply replaces your existing cap. approx dia: 58.6mm

Chrome 8 Ball Valve Cap Set of 2 Made from high impact plastic for light weight and durability Quality Chrome Finish