Shopping Search

10" RADIAL ARM SAW : The DELTA Model RS-830 10" ShopMaster Radial Arm Saw includes a steel stand, sawblade, wrenches and automatic blade brake and is powerful enough for the most challenging jobs: 120/240V, 1-1/2HP, 1PH motor - 5/8" arbor. 2-3/4" maximum cut depth @ 90 . 2-1/2" maximum cut depth @ 45 . Miter scale has positive 0 and 45 settings, left and right - 0 , 45 and 90 bevel stops. 27" x 44" table. 57"H x 34"D x 44"W. Weighs 166 lbs. Two-year manufacturer's warranty. USA. NOTE : $45 Machine Motor Freight Charge Applies .

For 50-in fence system 27-in x 44-in. Use with BC50, U50 and 50-in T-Square. Includes: Universal Table Board - 78-852.

The Delta 50-288 Mobile Base is for use with the Delta 31-260X Drum Sander. The 50-288 Mobile Base allows for increased mobility with what would otherwise be a stationary sander. This Mobile Base allows you to move the 31-260X Drum Sander around the workshop for convenient storage options â?" it's perfect for anyone with minimal space.

Provides operator protection even for non-through cutting operations Separate splitter is removable for dado cutting and molding operations Split basket design allows close to the fence cutting while using a push stick U-shaped support arm allows cutting to full capacity of the fence Fits Delta 10-inch Unisaws and Contractor's Saws, Weight: 54 lbs., Manufacturer: Delta

1.5 HP Dust Collector w/ Canister 1200 CFM - 50-850A. Motor & Blower. (1) 2 Micron Pleated Filter. (2) Plastic 6 Mil Chip Bags. Support Drum. (2) 4-in Diameter Dust Intake Ports. (1) 6 ft. Hose. (1) Intake Port Cap. Base. (4) Swivel Caster Assemblies. Cord & Plug.

Left-handed Biesemeyer Commercial Table Saw Fence System works with almost all table saws Constructed of 9-ply Finland birch Handles repetitive cut-off work, precision ripping, and squaring cuts Features secure, three-point locking system Includes a T-square fence, front and rear guide rails, front guide tube, mounting hardware, Manufacturer: Delta

Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy. Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations.

Features Powerful, 1/2HP, 120V motor. Manual brake stops sanding disc in seconds. Heavy-duty, steel disc plate features a 12 diameter, 80-grit abrasive disc for fast, efficient sanding.

Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy. Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable.

Powerful 1-1/2 HP Induction Motor with a 6 groove belt for maximum power transfer and an 18" drum for superior material removal The 31-260X has a rigid, welded C-frame head assembly that eliminates loose movement in the sanding drum resulting in superior parallelism of the work piece. Large sturdy steel cabinet style base dampens vibration for super smooth finish sanding. The cabinet style base easily converts to a user installed "Woodworker's Pantry" for sandpaper roll storage. Blow-molded integral dust hood with a positive lock secure seal is designed to extract dust from the entire drum without letting dust escape, keeping your shop air clear of harmful fine dust Up-front, motor controls and redesigned easy-to-read thickness gauge for accurate finish sanding. Large paddle type on/off switch for operator convenience and safety., Manufacturer: Delta

Delta 31-396 Oscillating Edge Sander w/ Spindle Sanding Attachment Powered by a 3 HP, 220 Volt single phase motor. Idler roller can be used for edge sanding of irregular shapes. Quick-release belt tensioning for easier belt changing. Front cast-iron sanding table can be moved up and down, forward and backward. Adjustable head from 0 to 90 with detent stops at 0, 45, 90. Spindle sanding kit with 3 sizes of drums and collars for contour sanding.

Dust collector with powerful 3 HP motor Design keeps dust from damaging motor Dust ports and motor housing can be set to face up or down Snap-in bag rings allow for fast setup; chip collection bags show when bags are full Also includes 2 filtration bags, 4 plastic chip collection bags, 2 snap-in bag rings, 4 4-inch intake ports, 4 swivel caster assemblies, and instruction manual, Weight: 206 lbs., Manufacturer: Delta

Precision drilling is a snap with the DELTA 18-900L 18-inch Laser Drill Press. This powerful drill press features sixteen speeds for drilling a variety woods, plastics, and metals, and the rack-and-pinion table is silky smooth when raising and lowering it to the desired height. The adjustable-position locking system allows for easy angle adjustments for repetitive drilling. The bright laser make certain that drilling accuracy is perfect every time.

BRAND NEW Delta Unisaw Table Saw - The Delta 36-L336 INCLUDES: 33-L336 10" Left Tilt Unisaw, 3 HP Marathon Motor, 36" Biesemeyer Fence and Rail System

6-inch bench top joiner; table supports up to 6-foot wide stock; ball-bearing 2-knife cutterhead and cutterhead lock 10 amp, 120-volt, variable speed (6, 000-11, 000 rpm) motor; center-mounted fence Cast-iron bed; steel fence Includes saw, push blocks, wrenches, manual 30 by 13-1/2 by 18 inches; 35 pounds; 2-year warranty, Weight: 41.5 lbs., Manufacturer: Delta

Delta 22-450 20" Planer DC-580 3-Phase, 5 HP, 20" Planer After nearly 90 years of expertise in the woodworking business, DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. The 22-450 includes Three Phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrench. Delta 22-450 20" Planer DC-580 3-Phase, 5 HP, 20" Planer Features: Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch. Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock. Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Con

10-in 3 HP, 220V, Single Phase, Left Tilt Unisaw w/ Biesemeyer - 36-L336. 36-in Black Biesemeyer Fence Rails - 78-138B. Black Fence Body - 78-919B. Unisaw Black Table Board 31-in for 36-in Beisemeyer - 78-864B. Black 2x2x34-1/4-in Fence Legs - 78-998B

Ripping capability both to the right and left of blade Fits most Delta 10" table saws. Elimination of hand-held tape 30" right, 12" left capacity for a variety of applications, Manufacturer: Delta

Shop for Power Tools at The Home Depot. Delta 46-455 12-1/2 in. 5 Speed Midi Lathe includes: 6 in. and 10 in. Tool Rest, spur center, Chrome 3 in. face plate, tool rest base, Knockout bar, live center, wrenches. All cast-iron construction provides stability and is extremely durable. Over Headstock On/off switch provides easy in use access.

Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bear Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor. Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension. Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures. Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-sl...

Delta 15-344 15" 200V Variable Speed Production Drill Press w/ LVC. Features Equipped with a 3/4 HP 200 Volt 1725 RPM 60 Hz three phase motor Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized pre-loaded lubricated-for-life ball bearings Massive quill is a full 2" diameter "VS6" has the same excellent construction plus an extra bearing below the spindle pulley Wide test-proven speed range gives you a true 10-to-1 speed ratio Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse self-locking taper on the spring-loaded rubber-tipped plunger that quickly restores correct belt tension Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling plus the extra stroke required for clearing jigs and fixtures Six speeds offers unbelievably wide range of speeds with a low-cost 1725 RPM motor Efficient variable-speed drive lets you select any spindle speed

6 3/4HP 115/230V DELTA DELUXE JOINTER"

X5 DJ20 8" PRECISION JOINTER : With its center locking fence and parallelogram bed design, the DELTA X 5 Model 37-365X 8" DJ20 Precision Jointer provides high quality cuts - time after time: 120/240V, 1-1/2HP, 1PH, 3, 450 RPM motor. 5, 500 RPM, 16, 500 CPM three knife ( 3-3/8" dia. ) cutterhead. 8" cutting width, 5/8" depth, 5/8" rabbeting. 76-1/2" table - 32" rear, 42" front. 5" x 35" fence tilts in and out 45 with positive 45 and 90 in and out stops. Includes enclosed stand, dust collector connector, rabbeting ledge, cutterhead guard with wrenches, push blocks, two pulleys and instructions. 32"H x 26"D x 76-1/2"W. Weighs 394 lbs. Imported. NOTE : $120 Machine Motor Freight Charge Applies .

12-1/2-in Portable Planer - TP305. 15 AMP, 120 Volt Motor. Dust Chute. Elevation Crank. Knife Setting Gauge.

The DELTA 15-262 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

40-695 Variable Speed Scroll Saw with Stand, Light and Flexible Dust Blower. Unique Dual Parallel-Link Arm Design Reduces Vibration, Noise and Keeps the Blade Perpendicular to the Work Surface. 1.3 Amp Motor Provides 400-1750 SPM with a 3/4-Inch stroke. Up Front Controls, On/Off Switch and Electronic Variable Speed Dial for Ease of Operation. Unique Upper Arm Lock, Hold the Arm in the Up Position, Allows for Ease in Blade Changing and Fret Work. Stand has Muli-Tilt Capacity for Operator Comfort. Oversized Castiron Table, 16-Inch X 24-Inch, Tilts 0 To 24 Degrees Left And Right.

No Description

10-in 5 HP, 220V, Single Phase, Left Tilt Unisaw w/ Biesemeyer - 36-L552. 52-in Black Biesemeyer Fence Rails - 78-055b. Black Fence Body - 78-919B. Unisaw Black Table Board 31-in for 52-in Beisemeyer - 78-918B. Black 2x2x34-1/4-in Fence Legs - 78-998B

Delta 37-361 12" 230V Single Phase Jointer (DJ-30) Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine. Rack and pinion movement for smooth, precise adjustment. Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed. Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between the table and cutterhead for safer, more efficient cutting, provides less tear-out.

The DELTA 31-300 6-inch/12-inch 1-1/2 HP Open Stand Belt/Disc Sander, 120/240-Volt 1 Phase has a powerful motor for great performance. Featuring a 1-1/2 HP induction-type ball-bearing motor, this open stand belt/disc sander will make quick work of any projects you throw at it. It features a manual thermal overload protection that prevents burn out. The tables are made of cast iron and are ribbed to prevent distortion. The tables can be tilted 0 and 45 degrees for bevel sanding. The sander is adjustable and can operate vertically, horizontally, and at any angle between. For added security, the on-off toggle switch can be padlocked to prevent unauthorized use. A miter gage accessory can be connected to the milled table slots. The sander comes with a steel stand, and has an integrated dust collection connector.