Shopping Search

With Replace Filter Indicator, 3 Speeds

Brand new Delta Ambient Air Cleaner With Pleated Filter - The Delta 50-875T2 includes: One (1) 1/5 HP, 60 Hz, 120V, 1 phase motor, Four (4) eye bolts and flange nuts for ceiling suspension, Four (4) rubber feet, One (1) 6 foot cord, One (1) Outer pleated filter, One (1) Inner filter, One (1) Remote control (requires 2 AAA batteries, not included)

Brand New Delta Stock Feeder 1/4 HP, 115 Volts, 1ph 4 speeds 14, 26, 36 & 63 feet per minute Wheels 3-1/8" x 1-3/16" Min. Length of Unbutted Stock - 4-1/2" Weight - 70 Lbs Height - 13-1/2", Width - 8-1/2", Length - 12"

No Description

Powerful 3 HP 3-phase, TEFC induction motor for long-lasting, smooth performance 2, 700 CFM; 230-/460-volt (wired 230-volt) Uses standard 1-micron filtration bags to keep your shop safer and cleaner measures 23 x 66 x 110 inches; weighs 186 pounds Included with dust collector: motor and blower, support frame, 2 1-micron filtration bags, 4 6-mm collection bags, 2 snap-in bag rings, 4 4-inch intake ports, and 4 swivel caster assemblies, Weight: 198 lbs., Manufacturer: Delta

The DELTA 31-735B 6-Inch/12-Inch 1-1/2 HP Belt/Disc Sander with Dust Bag is strong enough to handle 95 percent of your finishing operations. Ideal for both metal shops and woodworkers, the sander includes a 1.5 HP motor that flawlessly operates with its 2, 100 RPM 50-grit aluminum oxide disc sander and 3, 030 RPM 80-grit aluminum oxide belt unit. The belt is designed to operate vertically, horizontally, or at an angle. Large ribbed tables on both sanders are designed to prevent distortion. The belt table can be tilted 45 degrees out and 20 degrees in, while the disc table tilts at 45 degrees out for impeccable angle finishing. In addition, a sliding pivot pin allows for circle sanding. The sander includes a 4-inch dust port and built-in dust collector fan. Three-phase electricals are included and wired for 230-volt unless 460V is specified. The power cord and plug are designed for single phase only.

1.5 HP Dust Collector w/ Canister 1200 CFM - 50-850A. Motor & Blower. (1) 2 Micron Pleated Filter. (2) Plastic 6 Mil Chip Bags. Support Drum. (2) 4-in Diameter Dust Intake Ports. (1) 6 ft. Hose. (1) Intake Port Cap. Base. (4) Swivel Caster Assemblies. Cord & Plug.

Standard 1-micron filtration bags for optimal air cleaning Snap in bag rings mean no more fussing with cam-over-lock clamps Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust 6 mil plastic chip collection bags for optimal durability Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way, Weight: 95.6 lbs., Manufacturer: Delta

1.5 HP Dust Collector 1200 CFM - 50-786. 1 Micron Filter Bag - 50-890. (2) 6 Mil Plastic Chip Collection Bags - 50-891.

Features Powerful, 1/2HP, 120V motor. Manual brake stops sanding disc in seconds. Heavy-duty, steel disc plate features a 12 diameter, 80-grit abrasive disc for fast, efficient sanding.

Dust collector features powerful 5 HP motor Design keeps dust from damaging motor Dust ports and motor housing can be set to face up or down Snap-in bag rings allow for fast setup; chip collection bags show when bags are full Also includes 2 filtration bags, 4 plastic chip collection bags, 2 snap-in bag rings, 4 4-Inch intake ports, 4 swivel caster assemblies, and instruction manual, Weight: 290 lbs., Manufacturer: Delta

Delta 22-450 20" Planer DC-580 3-Phase, 5 HP, 20" Planer After nearly 90 years of expertise in the woodworking business, DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. The 22-450 includes Three Phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrench. Delta 22-450 20" Planer DC-580 3-Phase, 5 HP, 20" Planer Features: Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch. Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock. Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Con

Equipped with a 5 HP, 3450 RPM, 230/460 Volt, 60 Hz three phase motor. Standard 1 micron filtration bags keep your shop sader and cleaner. Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust; the dust ports and motor housing can be oriented facing up or down. Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps. 6 mil plastic chip collection bags show you when the bags need emptying. Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way. Includes: 5 HP Dust Collector 4800 CFM - 50-764, Motor & Blower, Support Frame, (2) 1 Micron Filtration Bags, (4) 6 Mil Plastic Chip Collection Bags, (2) Snap-In Bag Rings, (4) 5-in Intake Ports, (4) Swivel Caster Assemblies, Instruction Manual.

Dust collector with powerful 3 HP motor Design keeps dust from damaging motor Dust ports and motor housing can be set to face up or down Snap-in bag rings allow for fast setup; chip collection bags show when bags are full Also includes 2 filtration bags, 4 plastic chip collection bags, 2 snap-in bag rings, 4 4-inch intake ports, 4 swivel caster assemblies, and instruction manual, Weight: 206 lbs., Manufacturer: Delta

Come to our store for further discounts on a Brand new Delta 1-1/2 HP Dust Collector 1200 CFM - The Delta 50-850 includes: 1-1/2 HP motor, Blower, 5 micron filtration bag, 6 mil chip bag, Support drum, (2) 4" diameter dust intake ports, 6-foot hose, Intake port cap, Base, (4) swivel caster assemblies, Cord and plug.

No Description

The 1.5 HP belt/disc sander suitable for both metal and wood finishing projects. Includes a 2, 100 RPM disc sander and 3, 030 RPM belt unit Ribbed tables prevent distortion and can be tilted for superior angle finishing Weighs 446 pounds Includes 6-inch belt/12-inch disc single phase finishing machine, two tilting tables, V-Belt, 80-grit aluminum oxide belt, 50-grit aluminum oxide disc, Manufacturer: Delta

Delta 31-396 Oscillating Edge Sander w/ Spindle Sanding Attachment Powered by a 3 HP, 220 Volt single phase motor. Idler roller can be used for edge sanding of irregular shapes. Quick-release belt tensioning for easier belt changing. Front cast-iron sanding table can be moved up and down, forward and backward. Adjustable head from 0 to 90 with detent stops at 0, 45, 90. Spindle sanding kit with 3 sizes of drums and collars for contour sanding.

For 22-450 and 22-451 planer. Set of 3 planer knives. Includes: 20-in Planer Knives - 22-452.

The DELTA 31-300 6-inch/12-inch 1-1/2 HP Open Stand Belt/Disc Sander, 120/240-Volt 1 Phase has a powerful motor for great performance. Featuring a 1-1/2 HP induction-type ball-bearing motor, this open stand belt/disc sander will make quick work of any projects you throw at it. It features a manual thermal overload protection that prevents burn out. The tables are made of cast iron and are ribbed to prevent distortion. The tables can be tilted 0 and 45 degrees for bevel sanding. The sander is adjustable and can operate vertically, horizontally, and at any angle between. For added security, the on-off toggle switch can be padlocked to prevent unauthorized use. A miter gage accessory can be connected to the milled table slots. The sander comes with a steel stand, and has an integrated dust collection connector.

Brand new Delta AP400 2 Micron Dust Canister Filter Replacement canister filter for the Delta AP400 or the Delta 50-720, High filtration perfomance to keep your shop air cleaner, Captures harmful dust particles down to 2 microns in size, Pleated filter design provides 5x more surface area, than conventional filtration bags, increasing performance, Equipped with three cleaning flappers to knock dust free

Delta 50-721 Disposable Bottom Bags for 50-720/50-720CT (12pk) Fill and toss convenience eliminates the dirty task of dumping contents of your dust collection bag. Fabric bags require you to empty them in another container putting the dust you just removed from your project back into the air

Not intended for use with a thin-kerf blade A snap to add or remove when switching between dado and through-cutting Designed for a custom fit for easy installation on Delta contractors saw Always in perfect alignment with blade for trouble-free operation Designed to reduce dangerous kickbacks, Weight: 1.6 lbs., Manufacturer: Biesemeyer

No Description

No Description

The Delta Difference High carbon steel blades with precision machined and set teeth for accuracy. Tension-tested for strength. Additional Specifications Width: 1/8" Min. Cut: 3/16" TPI: 14 Thick:.014" Application: General purpose cutting of woods, plastics and compositions.

Recommended for Most 10" Circular Saws (Not recommended for the Deluxe Sawbuck, 8 1/4" Builder's Saw or the Sidekick 8 1/4" Builder's Saw) Specifications: Delta 35-7670 8" Carbide Tipped DADO Blade Diameter -- 8" Arbor Diameter -- 5/8" Capacity -- 1/4" - 13/16" The Delta 35-7670 DADO Includes: (6) 4 tooth chippers (4) 1/8" (3.2mm) chippers (1) 3/32" (2.4mm) chipper (1) 1/6" (1.6mm) chipper (12) Shims (4) .020" (0.5mm) shims (4) .010" (0.25mm) shims (4) .005" (.0127mm) shims (2) 24 Tooth carbide tipped saw blades Heavy-Duty carrying case organizes and protects blades when not in use

For use with 8-in and 10-in bench band saws (56-1/8-in). High carbon steel blades with precision machined and set teeth for accuracy. Tension-tested for strength. General purpose cutting of woods, plastics and compositions. Includes: 56-1/8-in Long Band Saw Blade (14 TPI) - 28-167.

High Carbon Steel blades with precision machined and set teeth for accuracy. 5/8 in. min. cut, 6 tpi, .014 in. thick. For general purpose cutting of woods, plastics, and compositions. Tools->Bench Power Tools->Band Saw Blades & Accessories

Delta 78-965 Biesemeyer Thin Kerfs Riving Knife Accessory riving knife for thin kerf blades. 0.110" thick riving knife. For blades with minimum 0.118" kerf and 0.098" max body thickness. Front of cabinet adjustability with no need to change for non-through cuts. You can also add the anti-kickback pawls and guard to the riving knife without tools. Use with the new Delta 36-L336, 36-L352 and 36-L552 Unisaws