Shopping Search

DO-IT-YOURSELF Marine MANUALSCLYMER?DO-IT-YOURSELF Marine MANUALSHundreds of photos, drawings and diagrams. Complete information on tools and techniques; troubleshooting; lubrication, maintenance and tune-up; timing, synchronizing and adjusting; lay-up and fitting out; Engine removal, installation and overhaul; cooling system; fuel, ignition and electrical systems; powerHead (Outboard motors), lower unit and stern drive unit service; Power Trim and tilt systems.

No Description

Great Lakes Skipper Click any image for larger view in a new window Great Lakes Skipper Please visit Great Lakes Skipper for THOUSANDS of new, hard to find boat parts and other marine surplus! We are selling a NEW, out of the box, approximate 108 foot roll of coated vinyl foam gasket tape from Crusiers Yachts, part number 03314. Features adhesive backing. Simply peel and stick to a clean, dry surface.Specifications: Vendor: Cruisers Yachts Part number: 03314 Material(s): Foam Gasket Thickness:

Jabsco Manually Operated Marine Toilet Compact BowlManual ToiletYou may install JABSCO Compact bowl manually operated marine toilets in both power and sailing craft, either above or below the waterline, for use on sea, river, lake or canal.

RMS (Continuous) Power: 100W X 1 at 4Ohm Total Harmonic Distortion (THD): <1% Frequency Response: (-3dB) 20Hz to 85kHz Dimensions: 2-3/8" x 9-1/2" x 7-5/16" Signal to Noise Ratio: 73dB

Quickly drains shower, sink or tub. Water is pumped out of box with self contained, super reliable, mercury free float switch. ...

The first line of defense in your engine's cooling system is a raw water strainer. These Raw Water Strainers are unequalled for quality and longevity in the marine industry. Features include traditional bronze strainer head, cast mounting brackets, and 304 stainless steel filter basket. The buna-N O-ring seal at the strainer cap ensures there will be no leaks under pressure or vacuum. The unique mounting system allows removal of the entire strainer without tools, and the screw-on strainer cap allows for easy maintenance. Install with pipe or hose.

Clymer Repair Manuals provide the most current, comprehensive information available for both outboard motors and stern drives. Featuring step-by-step instructions, photos and diagrams, each Clymer outboard motor and stern drive manual includes complete information on procedures from basic maintenance to complete overhaul. The ideal manual for do-it-yourself enthusiasts and professional mechanics.

bDual Locking Flush Mount Deck Socket/bpTwo attractive mirror polished 18-8 stainless steel heavy duty flush deck socket sets features a push button lock pin to allow use while underway. Includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation./pbrFasteners for attaching this mount to Gourmet Series Grills or Dual Mount (DM) Tables are included with the grill or tables.

Comprehensive, detailed, up-to-date service information for outboard motors and stern drives. Each has a step-by-step text geared for do-it-yourself owners or expert mechanics. There are hundreds of photos, drawings and tables. Special sections cover lubricants, corrosion prevention, propeller design, tools, test equipment, and safety and mechanical tips. Gas Motor Accessories

This anchor windlass features convenient do-it-yourself, above-deck installation and push-button control for easy anchoring. Offers power up/power down and manual freefall for getting the anchor down quickly and has a horizontal gypsy for 1/2" line and 1/4" chain. It's designed around a highly efficient spur gearbox using a smaller, more powerful permanent magnet motor that provides superior line speed, low power consumption. Rugged aluminum center case is surrounded by durable, protective composite side covers.

Lewmar Pro Series Windlasses. Back-breaking labor is for land lubbers! Quality Windlass from Lewmar makes your time at sea hassle-free. Power in / power out Windlass sports a 12V motor for FAST line speeds. Imagine... no more dealing with canvas, and no more standing in the pouring rain and wind to raise and lower your anchor. Details: 100% 316 stainless steel housing for wear protection and good looks; 12V motor for fast line speeds; Above-deck installation, easy to install with the DIY instructions; Easy manual recovery with standard 1/2" socket wrench; Includes Windlass, base gasket seal, mounting studs, installation wrench, toggle switch, and circuit breaker (Pro 1000 comes supplied with dual-direction manual recovery solenoid and rocker switch.; Choose yours and order today! Pull Power 700 lb; Boat Length 20-35'; Rope Size 1/2" 3-strand 8-plait; Chain 1/4" G4/BBB ISO; Power 500W; Lewmar Pro 700 Windlass

Major Repair Kit for Sherwood pumps G7B, G50, G85, M71, L90, G26, L1OB. Includes 1 impeller, 1 O'ring, 1 gasket, 1 seal, 5 snap rings, 1 key, 1 washer, 2 bearings, 1 end plate, 1 cam and 1 cam screw.

It is app 1/32" thick. This double coated black urethane adhesive tape is used to seal the gasket on your windshield. Applies easily by removing the protective layer.

This innovative flushing portable toilet has a unique holding tank that allows easy access for disposal of waste and cleaning. Easy-push pump releases the water into the tank. Secure side clamps and sealing gaskets keep the unit together. Fresh water tank has a 3.2 gal. capacity. Great for your trailer, boat, cabin, or next trip.The Loo 250 has a 2.8-gal. Holding tank, weighs 4 lbs., and measures 18.4" x 15.5" x 13.5".

Equip your boat with an additional outlet for all your electrical accessories. This marine quality socket/plug will mate with other 'cigarette lighter' type units. Socket includes an 'o-ring gasket' and a weather seal flap.

The manual toilet by Jabsco is a functional, stylish head for your boat that is economical both in itself and its usage. The Jabsco head is easy to install.

Mariner 2.5 - 275 HP Outboards, 1990-1993Part #: B715640 pages CHAPTER ONE / GENERAL INFORMATION Manual organization / Notes, cautions and warnings / Torque specifications / Engine operation / Fasteners / Lubricants / Gasket sealant / Galvanic corrosion / Protection from galvanic corrosion / PropellersCHAPTER TWO / TOOLS AND TECHNIQUES Safety first / Basic hand tools / Test equipment / Service hints / Special tips / Mechanic's techniquesCHAPTER THREE / TROUBLESHOOTING Operating requirements / Starting system / Charging system / Ignition system / Breaker-point ignition troubleshooting (1990-1992 2.5 hp models) / Capacitor discharge ignition (CDI) / Direct voltage test / Resistance test / Speed limiter / Spark advance/idle stabilizer module troubleshooting / Fuel system / EngineCHAPTER FOUR / LUBRICATION, MAINTENANCE AND TUNE-UP Lubrication / Storage / Anti-corrosion maintenance / Complete submersion / Flushing the cooling system / Tune-upCHAPTER FIVE / TIMING, SYNCHRONIZING AND ADJUSTING Ignition timing and synchronization / 2.5 hp models (prior to serial No. D90217) / 4 and 5 hp models / 8, 9.9 and 15 hp models / 20 and 25 hp models / 40 hp models / 50 and 60 hp models (prior to serial No. D000750) / 50 and 60 hp models (serial No. D000750-on) / 75 and 90 hp models / 100 and 115 hp models / 135-200 hp (except EFI) models / 250 and 275 hp models / 150, 175 and 200 EFI modelsCHAPTER SIX / FUEL SYSTEM Fuel pump / Carburetor / Throttle plunger carburetor (2.5 and 3.3 hp models) / Integral fuel pump carburetor (4 and 5 hp models) / Integral fuel pump carburetor with primer system (8-25 hp models) / WMA carburetor (40 hp models) / MerCarb center bowl carburetor (50 and 60 hp models prior to serial No. D000750) / WME carburetor (50 and 60 hp serial No. D000750-on, 75, 90, 100 and 115 hp models) / WMH carburetor (135-200 hp models) / MerCarb center bowl carburetor (250 and 275 models) / Thermal air valve (135-200 hp models) / Enrichment valve and choke solenoid systems / Anti-siphon devices / Fuel filter / Fuel tank / Fuel hose and primer bulb / Electronic fuel injection (EFI) / Fuel management testsCHAPTER SEVEN / IGNITION AND ELECTRICAL SYSTEMS Battery / Battery charging system / Starting system / Magneto breaker point ignition / Capacitor discharge ignition (CDI) (1993 [serial No. D901217-on] 2.5 and 3.3 hp models) / Capacitor discharge ignition (CDI) (4-275 hp models) CHAPTER EIGHT / POWER HEAD Engine serial number / Gaskets and sealants / Fasteners and torque / Power headCHAPTER NINE / LOWER UNIT GEAR HOUSING Service precautions / Gear housing / Water pump / Bearing carrier and propeller shaft / Pinion gear, drive shaft and forward gear / Lower shift shaft, bushing and cam / Propeller / Trim tab adjustmentCHAPTER TEN / POWER TRIM AND TILT SYSTEM Manual tilt assist system / One-ram integral power trim system (40-60 hp models) / Three-ram integral power trim system (75-200 hp models) / One-ram Oildyne power trim system (250-275 hp models) / Power trim assembly removal/installation / Power trim motor and pump assembly removal/installationCHAPTER ELEVEN / OIL INJECTION SYSTEM AutoBlend II (50 and 60 hp prior to serial No. D000750) / Constant-ratio oil injection (40 hp and 50-60 hp models [serial No. D000750-on]) / Injection system service / Variable-ratio oil injection (75-115 hp models) / Warning horn system / Injection system service / Variable-ratio oil injection (V6 models) / Warning horn system / Injection system serviceCHAPTER TWELVE / MANUAL REWIND STARTERS 2.5 and 3.3 hp models / 4 and 5 hp models / 8, 9.9, 15, 20 and 25 hp models / 40 hp modelsINDEX WIRING DIAGRAMS Models covered: 1990 1991 1992 1993 MARINER 100 HP1990 1991 1992 1993 MARINER 115 HP1990 1991 1992 1993 MARINER 135 HP1990 1991 1992 1993 MARINER 15 HP1990 1991 1992 1993 MARINER 150 HP1990 1991 1992 1993 MARINER 150 MAGNUM EFI1990 1991 1992 1993 MARINER 150 MAGNUM II1990 1991 1992 1993 MARINER 150 MAGNUM III1990 1991 1992 1993 MARINER 175 HP1990 1991 1992 1993 MA

This kit contains all the parts needed to replace the upper water pump - including housing, impeller, plate, seal, gaskets, and o-rings. Replacement kit fitsMercruiser - #1 Outdrives, serial #2495186-6854392 MR/Alpha I, serial #6854393-D594568 Mercury - 75 - 85 hp, 4 cylinder90 and 115 hp, 6 cylinder140 hp, serial #4865678 and up 150 hp, serial #4121435 - 4868647 V135 thru V225 and XR4 Mariner - 80 hp, 4 cylinder 90 and 115 hp, 6 cylinder 135 thru 220 hp and Mag II

Product Features: Maintenance and Care Type: Gaskets, Hardware

GARMIN VHF 100 Marine Radio MFG# 010-00754-00 What's in the Box: VHF 100 Power cable Bail mount and knobs Flush mount gasket Marine mounting screws Mic hanger Protective cover Documentation The Garmin VHF 100 marine receiver features intuitive design and provides radio communication to enhance convenience and safety to mariners worldwide. The Garmin VHF 100 provides full Class D Digital Selective Calling (DSC) capability via NMEA 0183 interface. Should trouble arise, DSC provides distress calls with the push of a button. And if your boat is already interfaced with a compatible GPS chartplotter, youll get mayday signaling and a digital broadcast of your boats position. The VHF 100 also features NOAA weather alerts and Position Tracking, which allows a mariner to locate and keep tabs on up to three other boats in the area. The VHF 100 has a simple user interface thats easy to read while on the go so youll always have the right information at the right time. In addition to dedicated buttons and knobs for eas

Great Lakes Skipper Click any image for larger view in a new window Great Lakes Skipper Please visit Great Lakes Skipper for THOUSANDS of new, hard to find boat parts and other marine surplus! We are selling a new in the original packaging Mercury 250 jet drive to engine gasket, Quicksilver part #27-883051. GLS Stock Number: 1008822--1DX2--D3 Does this item have a Free Shipping option? Check the shipping tab. If you see a Free Shipping option, we will cover the shipping cost to any physical addr

Clymer Repair Manuals provide the most current, comprehensive information available for both outboard motors and stern drives. Featuring step-by-step instructions, photos and diagrams, each Clymer outboard motor and stern drive manual includes complete information on procedures from basic maintenance to complete overhaul. The ideal manual for do-it-yourself enthusiasts and professional mechanics.

No Description

Save money while protecting the environment. With the refillable Eco-Blast, youll never need to buy another refill. This air horn emits a powerful 115 dB signal that meets all USCG requirements. Unlike chemical horns, the Eco-Blast is environmentally

ARG Series Raw Water Strainers The first line of defense in your engine s cooling system. Well-made traditional bronze strainer head. Mounting system allows removal of the strainer without tools. 304 stainless steel filter basket Buna-N O-ring seal at strainer cap No leaks under pressure or vacuum Cast mounting brackets

Provides reliable performance, larger capacity, and simpler installation and maintenance. Sump box features include an air vent to prevent air locks. Slotted mounting feet allow for quick installation and removal. Straight mesh filter allows for easy removal and cleaning. Inlets are routed directly into the sump box instead of through a shared manifold so additional inlets can be added to the left, right, and back side of the sump box through the use of thru-hulls. Water is pumped out with Attwoods Sahara pump with self-contained float switch. Lid easily snaps on and off and includes a gasket to seal the sump box against overflow. 36" wire.

Raw Water Strainers Designed for easy installation and cleaning. Features include mounting lugs cast into both sides for universal mounting. Four outside tie rods and a 304 stainless steel strainer basket minimize electrolysis. Hinged cover lugs Easy strainer basket removal Bottom drain plug Easy removal of sediment and draining

No Description

Includes both upper & lower housings gaskets plate and impeller.; Fits 30 JET (USA 0C159200-0G589999) 35 hp. 2-cycle (2 cylinder) 40 hp. 2-cycle (USA 4860103 thru MY1983 AUS 8052125 & above BEL 9184451 thru MY1983 CAN 7112423 & above) 45 hp. 2-cycle (4 cylinder) 50 hp. 2-cycle (4 cylinder) (USA 5531630 & above AUS 8063985 & above BEL 9248006 & above CAN 7143688 & above) 50/60 2-cycle (3 cylinder) (USA 6428681-0D000749 BEL 9385911-9683054 CAN 7208333 & above) 70 hp. 2-cycle (3 cylinder) (USA 4977157-6428680 AUS 8050200 & above BEL 9196961-9385910 CAN 7110998-7208332).