Shopping Search

Provides clean and reliable power for charging and maintaining battery state-of-charge during service reflash complex maintenance and in the showroom where vehicle demonstrations can require significant power from the battery. Allows for vehicles to be displayed with all electrical features and accessories activated. Great for maintaining the battery. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging battery. Automatically maintains the battery when performing complex mechanical service. Advanced switch-mode design. Provides a cleaner more reliable power source than a standard charger. Fully regulated DC output prevents overcharging of the battery and provides precise control to maintain the necessary battery voltage during complex service and reflash. Quiet small and compact for portability. Multiple protection features for a long trouble-free life. Reverse battery polarity protection via replaceable fuses. Brownout input protection. Over-current protection: cycle-by-cycle peak-limiting as well as rated current-limiting to maximize the life of the converter. Over-temperature protection. High quality detachable cables for easy field service. Power Supply Voltage Regulation: 13.6 V. Maximum Amps Output at Regulated Voltage: 75A. On/Off Switch. Removable Cable Set: 6 foot clamp set.

This multi-battery charger can charge up to 12 batteries simultaneously and is ideal wherever charging multiple batteries is the norm. Its dimensions measure 13 1/2"w x 11"h with a 13 diameter. It is completely portable with 72-volts and includes a charger and 5 jumpers for connecting batteries in a series. It has the capability to charge six 12-volt batteries or twelve 6-volt batteries and a fuse protects against overload and short-circuits. It is ideal for low-rider cars or fleet and industrial operations and is perfect for those applications where portability is a must.

NEW 36V FORKLIFT BATTERY CHARGER 36 VOLT IFR18HK750 3 PHASE BRAND NEW BATTERY CHARGER. CAN BE SET UP FOR 208 V 240 V OR 480 V SETUP. ITEM IS NEW HAS NEVER HAD A PLUG INSTALLED ON IT. COMES NEW IN BOX YOU WILL NEED TO INSTALL YOUR OWN POWER CORD AND PLUG OR HARD WIRE TO YOUR LOCATION AND INSTALL THE APPROPRIATE AMP FUSES FOR YOUR INPUT POWER. Model IFR18HK750 36 VOLTS 143 AMPS 18 CELLS 8 HR CAPACITY 750 AC INPUT 208 V 240 V 480 V 3 PHASE Model IFR18HK750 36 VOLTS 143 AMPS 18 CELLS 8 HR CAPACITY 750 AC INPUT 208 V 240 V 480 V 3 PHASE

No Description

Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. ~ Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack). ~ Fast charger with current switch to select either, 0.9A and 1.8A. ~ Delivers full charge within 1 - 2 hours. ~ Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. ~ For 2000 mAh pack, charging time is 1 hour. ~ Charging Current 1.8A for battery packs with capacity above 2000mAh. ~ For 3000mAh pack, charging time is 1.5 hours. ~ Smart Charger with automatic voltage detection. ~ Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. ~ Red LED will be on during charging. ~ Automatically charging ending with negative delta V. ~ Worldwide usage with 120-240V AC ~ With Temperature sensor Safety protection fuse for over current, short circuit & reverse polarity protection.

No Description

Sentry Switchmode SM series battery chargers are designed to be fully automatic and for unattended operation. This means that the charger gives the batteries a charge only when current is requested. The charger will charge only what the battery needs, meeting requested output. Features (5) Charger Status indicator / warning lights for On/Off, Boost Charger Fault, Temp Fault and DC Fuse Fault . All models are current limited and ignition protected. All SM Series chargers are built to ABYC specifications. Specifications: Manufacturer: Sentry CruisAir Model: SM-121003B or SM12100/3B Vendor: Rampage Yacht Color(s): Off Color White Output Voltage: 12V Input Voltage: 115V 20A Input Frequency: 60 Hz Battery Type: Gel Flooded Boost Mode: 14.3V; 13.9V (flooded) Float Mode: 13.6V; 13.2V (flooded) Max Amps: 100 Banks: 3 Overall Dimensions: 13-1/2" W x 11" (12" D w/ knob) x 6-5/8" H Sold as seen in pictures.

Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY * Input: AC100-240V * Output: 6-12V 0.9or1.8A Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on * Battery will be charged at 0.9A or 1.8A constant current, * Approximate Charging time is about 1.5hrs for 3000mAh battery, 1hr for 1800mAh battery. * The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. * Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. * Battery pack must be made by high drain current cell. * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the abtteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger!

Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger Product Features: Helps charge 12V batteries with the power of the sun Works with motorcycles, personal water crafts, ATVs, snowmobiles and tractors Amorphous panel works in all daylight conditions and is weatherproof for added durability Built-in overcharge/discharge protection Complete kit includes 8 ft of wire connected to the solar panel, 8 ft of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Techno

Provides clean and reliable power for charging and maintaining battery state-of-charge during service reflash complex maintenance and in the showroom where vehicle demonstrations can require significant power from the battery. Allows for vehicles to be displayed with all electrical features and accessories activated. Great for maintaining the battery. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging battery. Automatically maintains the battery when performing complex mechanical service. Advanced switch-mode design. Provides a cleaner more reliable power source than a standard charger. Fully regulated DC output prevents overcharging of the battery and provides precise control to maintain the necessary battery voltage during complex service and reflash. Quiet small and compact for portability. Standard 3 Year Warranty. Multiple protection features for a long trouble-free life. Reverse battery polarity protection via replaceable fuses. Brownout input protection. Over-current protection: cycle-by-cycle peak-limiting as well as rated current-limiting to maximize the life of the converter. Over-temperature protection. High quality detachable cables for easy field service. Power Supply Voltage Regulation: 13.6 V. Maximum Amps Output at Regulated Voltage: 45A. On/Off Switch. Removable Cable Set: 6 foot clamp set.

Car Battery Chargers by PowerMax. PowerMax PMBC Series Battery Chargers Features - Keep your battery fully charged while your ride's sitting idle with PowerMax PMBC Series Battery Chargers. Expertly engineered to trickle-feed a clean, reliable flow of DC power. Clean DC power won't damage your battery. Ideal for classics, project cars, Sunday drivers, showroom rides, ATVs, RVs and any vehicle that's not regularly driven. Your PowerMax PMBC boasts redundant safeguards to protect your power cell and the PMBC itself. PowerMax PMBC Battery Chargers - PowerMax AC to DC 12v Battery Chargers. For the top selection of PowerMax Car Batteries shop online today. The PowerMax PMBC Battery Chargers - PowerMax AC to DC 12v Battery Chargers will improve and personalize your vehicle. Car Battery Chargers by PowerMax - selected by many auto enthusiasts in the top automotive discussion forums.

Goal Zero Extreme 350 Power Pack for Solar Panels Powering your Life Get the Extreme 350 as an add-on to your Extreme power kit and enjoy even more power. Whether at base camp on Everest, relief efforts in Haiti or your summer cabin you can have longer lasting power chaining up to a total of four (4) Ranger power packs. That's 1400 watt hours of extreme power. Charge via wall, solar panels or car adapter and use as a primary source of power for lighting, cooling and accessories. LCD status monitor keeps track of power storage in 20% increments. Ergonomic rubberized handle for greater comfort and grip. Backup and replaceable fuses to protect from power surges. Built-in temperature control and fuse systems to ensure safety and long-term performance. Use with Extreme UI - Universal Inverter which provides up to 400 watts of continuous power and 800 watts peak. Long-lasting 350 watt-hour power pack Rechargeable AGM battery; (500 - 800 cycles) Leave plugged in at home or cabin for emergency backup power Charging T

Sunforce 50013 1 Watt Motorcycle & Powersports Solar Battery Charger The Sunforce 50013 1 Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and tractors. The 50013 is not only weatherproof, but maintenance free and extremely easy to install. With its built in overcharge / discharge protection, you cannot go wrong with the 50013 battery charger. This top of the line solar panel works in all daylight conditions to keep your batteries charged. Your purchase includes wires with quick connect technology, battery clamps, and an O ring connector and fuse. Product Features Works with motorcycles, personal water crafts, ATVs, snowmobiles & tractors Weatherproof Built in overcharge / discharge protection

Provides clean and reliable power for charging and maintaining battery state-of-charge during service reflash complex maintenance and in the showroom where vehicle demonstrations can require significant power from the battery. Allows for vehicles to be displayed with all electrical features and accessories activated. Great for maintaining the battery. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging battery. Automatically maintains the battery when performing complex mechanical service. Advanced switch-mode design. Provides a cleaner more reliable power source than a standard charger. Fully regulated DC output prevents overcharging of the battery and provides precise control to maintain the necessary battery voltage during complex service and reflash. Quiet small and compact for portability. Standard 3 Year Warranty. Multiple protection features for a long trouble-free life. Reverse battery polarity protection via replaceable fuses. Brownout input protection. Over-current protection: cycle-by-cycle peak-limiting as well as rated current-limiting to maximize the life of the converter. Over-temperature protection. High quality detachable cables for easy field service. Power Supply Voltage Regulation: 13.6 V. Maximum Amps Output at Regulated Voltage: 32A. On/Off Switch. Removable Cable Set: 6 foot clamp set.

Voltaic Systems 1021 Lightweight Fuse 4W Solar Power Charger - Battery - Bag - Attachment System - Voltaic Systems 1 Year Battery Warranty.The Fuse Solar Charger is a lightweight way to add solar and battery power to any bag. It connects in seconds to bags, tents, bicycles and pretty much anyplace else you might need solar power. Two 2.0 Watt Solar Panels generate power in sunlight. They are waterproof, lightweight and built to withstand abuse. Universal USB Battery stores power for use anytime and is specially designed to charge efficiently from solar. When not in the sun, the battery can be charged using the USB Power Cable or optional AC travel charger or DC car charger making it just as useful on the grid as off. Connect to Devices via the USB Port or 5 standard adapters.

Features:* Helps charge 12V batteries with the power of the sun * Works with Motorcycles, PWC, ATVs, Snowmobiles, and Tractors * Weatherproof * Easy connection to the battery * Maintenance-Free/Easy Installation * Built-in Overcharge/Discharge Protection * Works in all daylight conditions * Includes 8' wire connected to solar panel, extra wire, battery clamps, O-ring connector and fuse, quick-connect technology * Dimensions: 19.5"L x 5-7/8"W x 1.5"H picture for this listing is the one on the le

* Standard Dimension: 5.39"x1.87"x0.95" inch, fits all RC10 cars * Weight: 11.5 Oz * Capacity: 3000 mAh * Voltage: 7.2V * Connector: Standard Tamiya * Standard Charge: 12 hours @ 300 mA * Rapid Charge: 1.5 hours @ 3000 mA 7.2V - 12V Smart Universal Charger Features and Benefits * Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000 mAh pack, charging time is 1 hour. * Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. * Smart Charger with automatic voltage detection. * Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. * Red LED will be on during charging. * Automatically charging ending with negative delta V. * Worldwide usage with 120-240V AC * With Temperature sensor * Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on * Battery will be charged at 0.9A or 1.8A constant current, * The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. * Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. * Battery pack must be made by high drain current cell.

Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 12V-16.8V NI-MH/NI-CD Battery Packs (10-14 Cells in series) * Input: AC100-240V * Output: 12V-16.8V 0.9 or 1.8A Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on * Battery will be charged at 0.7A or 1.4A constant current, * Approx, Charging time is about 2 hrs for 3000mAh battery, 1.5hr for 1800mAh battery. * Don't charger battery pack with voltage less than 12V or Voltage bigger than 16.8V and capacity less than 1100mAh. * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution * The charger is designed for indoor use only. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger!

Provides clean and reliable power for charging and maintaining battery state-of-charge during service reflash complex maintenance and in the showroom where vehicle demonstrations can require significant power from the battery. Allows for vehicles to be displayed with all electrical features and accessories activated. Great for maintaining the battery. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging battery. Automatically maintains the battery when performing complex mechanical service. Advanced switch-mode design. Provides a cleaner more reliable power source than a standard charger. Fully regulated DC output prevents overcharging of the battery and provides precise control to maintain the necessary battery voltage during complex service and reflash. Quiet small and compact for portability. Standard 3 Year Warranty. Multiple protection features for a long trouble-free life. Reverse battery polarity protection via replaceable fuses. Brownout input protection. Over-current protection: cycle-by-cycle peak-limiting as well as rated current-limiting to maximize the life of the converter. Over-temperature protection. High quality detachable cables for easy field service. Power Supply Voltage Regulation: 13.6 V. Maximum Amps Output at Regulated Voltage: 75A. On/Off Switch. Removable Cable Set: 6 foot clamp set.

Manage your battery stock more effectivelyEnsure that every battery will stay sold, by properly charging it before you sell itAvoid problems caused by gradual discharge of batteries in showroom or stored vehiclesCharges and maintains up to five batteries simultaneously and independentlyIUoU three-step charging; 1.8A constant current main charging stageTwo or more charging stations can be connected to the same battery when faster charging of larger capacity batteries is requiredIntegral electronic protections against short circuits at the clamps and wrong polarity connections; spark suppression system; no fuses to burnIncludes four clips for easy wall mounting

Tenergy Smart Universal NIMH/NICD Battery Charger 7.2-12V overcharge protection Introducing: The "must-have" Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Will Work with any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells packs). This system ill not overcharge your batteries or memory code them shortening use time. SPECIFICATIONS Smart Charger with automatic voltage detection For use with NIMH and NICD packs only Worldwide usage with 120-240V AC Charges 7.2v - 12 volt cells Two current settings 1.0A- 2.0A Safety protection fuse for short circuit & reverse polarity protection Temperature sensor CONDITION BRAND NEW in the BOX Package Includes (1) Tenergy SMART Charger Tamiya Female connector Male Tamiya to Mini Female adapter Alligator clip adapter with Male Tamiya connector

Shop for Electrical at The Home Depot. Using the power of the sun, the Sunforce 1 Watt Solar Power Sports Charger helps charge 12 Volt batteries. Designed to charge the batteries of ATVs, personal water crafts, motorcycles, and much more. This unit is completely maintenance free and easy to install. The amorphous solar panel charges in all daylight conditions, even on cloudy days! For added durability, the panel is weatherproof and has a built-in overcharge/discharge protection. The complete kit includes 8 ft. wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector and fuse, and quick connect technology.

The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge / discharge protection, this top of the line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes: 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation.

Various Connectors Supported:. Hitech. JST. Deans. Tamiya. Traxxas. Supports multiple types of battery packs with one single charger! The follow packs are supported:. NiMH/NiCD 1~15 cells ( 1.2v to 18v). Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v). Li-Fe 1~6 series. Sealed Lead Acid (SLA). Charger Specifications:. Handle NiMH, NICD, Li-Po, Li-ion, Li-Fe, SLA Batteries. Build-in Balance. Temperature Sensor. DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.

No Description

Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY * Input: AC100-240V * Output: 6-12V 0.9or1.8A Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on * Battery will be charged at 0.9A or 1.8A constant current, * Approximate Charging time is about 1.5hrs for 3000mAh battery, 1hr for 1800mAh battery. * The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. * Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. * Battery pack must be made by high drain current cell. * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the batteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger

The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Included for free! Supports the following connector types: TraxxasTamiyaMini TamiyaJSTHitecEC3Deans Supports multiple types of battery packs with one single charger! The follow packs are supported: NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA) Charger Specifications: Handle NiMH, NICD, Li-Po, Li-ion, Li-Fe, SLA Batteries Build-in Balancer DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. Optimized operating software 'AUTO' function sets the feeding current or the cell count of the battery automatically. Can prevent the over-charging for Li-ion/Li-Polymer batteries. Every program in the unit is controlled with mutual links and communication for possible error Individual voltage balancer for Li-ion/Li-Polymer batteries inside Balance individual cells on discharge TB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of battery - LiIon, LiPo and LiFe Battery 'Fast' and 'Storage' mode Data store/load Can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting. Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

The Best ALL-IN-One Compact Universal Charger in the Market No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported. Supports multiple types of battery packs with one single charger! The follow packs are supported: * NiMH/NiCD 1~15 cells (1.2v to 18v) * Li-PO/Lithium Ion 1~6 series (3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) Charger Specifications: 1. Handle NiMH, NICD, Li-Po, Li-ion, Li-Fe, SLA Batteries 2. Build-in Balance 3. Temperature Sensor 4. DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can use Wall Plug AC-DC12V/5A Switching Power as an power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz Charge/discharge power max. 50/5 Watts NiCd/MH 1~15 cells LiIo/LiPo/LiFe 1~6 series Pb 2~20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Battery data memory up to 5 data Weight 1000g Dimension 160x120x40 mm User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V

Fi-Shock SS-2000X Battery Powered 10 Mile Heavy Duty Fence Charger Features Medium duty chargers for electric fence containment of pigs, cattle, horses, deer, cows, sheep and goats Operates off a 6, 9 or 12 volt battery. Uses two 1 amp fuses for downline protection against power surges Fence terminals are on bottom of unit for rain protection. DC intermittent input Range up to 10 miles under ideal conditions. Output voltage: 10 KV +/- 20% open circuit voltage.One Year Limited Warranty Details D

Tecmate Accumate 612 Mini Charger Ideal for maintaining batteries of seasonally used or stored vehicles, including classic vehicles and deep-cycle batteries used in stand-by power applications. Features Charges the battery with 0, 9A current and keeps the battery fully charged when not in active use, without risk of over-charging100 % SAFE - Includes an auto-resetting thermal fuse switch that prevents the chargers output circuit from exceeding a safe temperatureEASY TO USE - select 6 or 12 volt by siding selector on rear of charger, connect to battery, then to the power socket. The rest is automaticRecommended for use on all types of lead-acid batteries up to 55AhSupplied with 2 detachable and interchangeable SAE battery connectorsApproved by ITS to UL and CSA safety standards for battery chargers2 year limited warrantyService centers in the USA and CanadaAlways use a battery charger with a nominal output voltage that matches the nominal battery voltage. i.e. 12 volt charger for 12 volt batteries