Shopping Search

Combo Includes: .1 x Tenergy Universal Smart 3A Battery Charger (Hybrid): 7.2V - 12V. .1 x standard Tamiya Female connector. .1 x Alligator clips (red + black). .1 x Temperature sensor (NTC) cable..2 x Tenergy 9.6V 3800mAh Flat NiMH Battery Pack w/ Tamiya. Tenergy Universal Smart 3A Battery Charger (Hybrid): 7.2V - 12V .Rated output voltage: 17.8V ± 0.2V .Output voltage: 7 V DC ~ 18.5V DC .Battery capacity extend: 0.8Ah ~ 15Ah (1A current) 1.6Ah ~ 30Ah (2A current) 2.4Ah ~ 45Ah (3A current) .Number of cells: 6-10 NiMH/NiCD cells in series .Charge current: 3A ± 0.2A / 2A ± 0.1A / 1A ± 0.1A .Max. delivered power: 54W .Rated AC input: 100~240VAC 50/60Hz.Input voltage: 90~264VAC .Rated input current: 0.55Arms (220VAC input and full load) .Max. input power: 68W Tenergy 9.6V 3800mAh Flat NiMH Battery Pack w/ Tamiya .Advanced NiMH battery technology, no battery memory effect. .Easy operation, battery can be charged anytime without the need to fully discharge. .For use on upgraded and/or modified AEG's. .Best if stored in temperature 35-70 Degree and keep away from sun light or heat. Specifications .Voltage: 9.6V .Cells: Nimh Sub C x 8 .Capacity: 3800mAh .Maixmum Discharge Rate: 38A .Connector Type: Large Tamiya. .Dimensions: Height 0.98"; Width 1.9"; Length 7.1" .Weight: 19.6 Oz.

NiCd. 700mAh/9.6V. For use with any radio control vehicle. Charges up to 1 000 times. Satisfaction ensured.

No Description

INDUSTRIAL FORT LIFT CHARGER SCR 200, #2942 BY: INDUSTRIAL BATTERY CHARGER GNB PART NO. BA2491S S.N. 09G1664 M MODEL SCR 200 VOLTS 208/240/480 AMPS 41.3/9.6/4.9 HZ 60 PHASE 1 CELL 12 DC VOLTS OUT 24 DC AMPS OUT 40 OVERALL DIMENSIONS: 19.75" X 17" X 26.5 HIGH

Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. ~ Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack). ~ Fast charger with current switch to select either, 0.9A and 1.8A. ~ Delivers full charge within 1 - 2 hours. ~ Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. ~ For 2000 mAh pack, charging time is 1 hour. ~ Charging Current 1.8A for battery packs with capacity above 2000mAh. ~ For 3000mAh pack, charging time is 1.5 hours. ~ Smart Charger with automatic voltage detection. ~ Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. ~ Red LED will be on during charging. ~ Automatically charging ending with negative delta V. ~ Worldwide usage with 120-240V AC ~ With Temperature sensor Safety protection fuse for over current, short circuit & reverse polarity protection.

This is the DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD. Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMH compatibility makes this charger great for 1/18-1/8 scale electrics, nitro receiver packs and even transmitter batteries. LCD shows battery voltage, charge current, time, capacity, battery type and more. Small, lightweight switching AC power supply delivers up to 5 amps of charge current. Solid state reverse polarity and current overload safety devices. Five year MANUFACTURER'S warranty. SPECS: AC Input: 110V AC 60Hz DC Input: 11-15V DC, built-in lead with alligator clips Battery Types: 4-8 NiCd or NiMH cells (4.8-9.6V) Battery Capacity Range: 750-7500mAh

Scrubby Battery Quick Charger for use with Scrubby 9.6V Battery.

FAST CHARGER BATTERIES 7.2V TO 12V TENERGY #01005 GET YOUR RC TRUCKS BUGGIES CHARGED QUICKLY FEATURES AND BENEFITS: Best Charger for charging all RC Car, RC plane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours. Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000 mAh pack, charging

FEATURES AND BENEFITS BATTERY PACK * High Capacity 7.2V 3800mAh Nickel Metal Hydride RC Battery Pack. * Advanced NiMH battery technology and no battery memory effect. * Easy operation, battery can be charged anytime without the need to fully discharge. * Built in Standard Tamiya Connector. * Specially designed for RC Racing vehicles for fast vehicle start and long running time. * Much longer running time and easy operation than original NiCd battery pack. TECHNICAL SPECIFICATIONS * Voltage: 7.2V * Capacity: 3800mAh * Maximum Discharge Rate: 38A * Connector Type: Standard Tamiya. * Dimension: 5.38"x1.87"x0.95" * Weight: 12.7Oz. SMART UNIVERDSAL CHARGER * Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. * Universal for for any NiMH /NiCd battery packs 7.2V 12V (610 Cells pack) * Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 2 hours. * Charging Current 0.9A for battery packs with capacity from 1100mAh 2200mAh. For 2000mAhpack, charging time is 1 hour. * Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. * Smart Charger: o with automatic voltage detection o Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. o Red LED will be on during charging. o Automatically charging ending with negative delta V. * Worldwide usage with 120240V AC * Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included: * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses

Tenergy Smart Universal NIMH/NICD Battery Charger 7.2-12V overcharge protection Introducing: The "must-have" Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Will Work with any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells packs). This system ill not overcharge your batteries or memory code them shortening use time. SPECIFICATIONS Smart Charger with automatic voltage detection For use with NIMH and NICD packs only Worldwide usage with 120-240V AC Charges 7.2v - 12 volt cells Two current settings 1.0A- 2.0A Safety protection fuse for short circuit & reverse polarity protection Temperature sensor CONDITION BRAND NEW in the BOX Package Includes (1) Tenergy SMART Charger Tamiya Female connector Male Tamiya to Mini Female adapter Alligator clip adapter with Male Tamiya connector

No Description

features and Benefits * Built with 6 Tenergy 5000mAh Sub C Racing Cells. * No cell memory effect. No need to fully discharge before recharging. * Tamiya High Speed Connector * All Cells Matched and Zapped * Fits with popular standard 7.2V RC cars like Traxxas, LOSI, Associated, HPI, Tamiya, Kyosho, etc. Technical Specifications * Standard Dimension: 136mm x 47.5mm x 24.5mm, fits all RC10 cars * Weight: 455g * Capacity: 5000 mAh * Voltage: 7.2V * Single Cell Discharge Platform: 1.24V * Connector: Standard Tamiya Features and Benefits * Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. * Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) * Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours. * Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000 mAh pack, charging time is 1 hour. * Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. * Smart Charger with automatic voltage detection. * Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. * Red LED will be on during charging. * Automatically charging ending with negative delta V. * Worldwide usage with 120-240V AC * With Temperature sensor * Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY * Input: AC100-240V * Output: 6-12V 0.9or1.8A

LIMITED SPECIAL SALE!!! Specifications * Voltage: 9.6V * Maixmum Discharge Rate: 38A * Connector Type: Standard Tamiya. * Dimensions: Height 0.9"; Width 1.7"; Length 7.0" * Weight: 15.5 Oz. Features and Benefits * Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. * Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) * Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. * Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour. * Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. * Smart Charger:with automatic voltage detection. * Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. * Red LED will be on during charging. * Automatically charging ending with negative delta V. * Worldwide usage with 120-240V AC * Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses

Smart Charger for 8.4-9.6V NiMH Batteries Mini Tamiya Tenergy Smart Charger for 8.4-9.6V NiMH Battery Packs Mini Tamiya Features and Benefits: Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). Please use the charger for battery packs with capacity of 1100-1600mAh. Able to auto distinguish bad battery and indicate malfunction. Able to activate over-discharged cells. Current ram-up way benefits cell capacity and life cycle. Unique test mode guarantees high quality. Automatically stop when battery pack is fully charged by Delta Peak detection. Short circuit & reverse polarity protections. Compact battery pack charger with LED. Built in mini female tamiya connector. UL Certified Warning: This appliance is not intend to be used by persons (including children) with reduced physical, sensory, mental capacities, or lack of experience and knowledge concerning the use of appliance. Specifications Output Voltage: 8.4 -9.6V Amperage: 1100-1600mAh Input Voltage: 100 - 240V Brand: Tenergy Chemistry: NiMH Compa

Specification: * Input: o 100V-240V /50-60Hz AC Power o Standard USA AC power plug. * Patented 4 Stage charge algorithm guarantee 100% Protection * Automatic change 9.6V LiFEPO4 battery from any status. * Rated output voltage: 9.6V * Output voltage: 6.0 V DC ~ 10.95V DC * Suit with battery: >1.6Ah 9.6V LiFePO4 3 cell * Charge current: 2.0A ± 0.1A * Pre-charge current: 0.5A ± 0.05A * Cut-off current: 0.2A ± 0.02A * Rated AC input: 100~240VAC 50/60Hz * Input voltage: 90~264VAC * Rated input current: 0.195Arms * Max. input power: 28W * Dimension: 118mm x 59mm x 36.5mm * Weight: 287g Accessories Included * Alligator clips (red + black). Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the batteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger!

Smart Charger for 8.4-9.6V NiMH Batteries Mini Tamiya Tenergy Smart Charger for 8.4-9.6V NiMH Battery Packs Mini Tamiya Features and Benefits: Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). Please use the charger for battery packs with capacity of 1100-1600mAh. Able to auto distinguish bad battery and indicate malfunction. Able to activate over-discharged cells. Current ram-up way benefits cell capacity and life cycle. Unique test mode guarantees high quality. Automatically stop when battery pack is fully charged by Delta Peak detection. Short circuit & reverse polarity protections. Compact battery pack charger with LED. Built in mini female tamiya connector. UL Certified Warning: This appliance is not intend to be used by persons (including children) with reduced physical, sensory, mental capacities, or lack of experience and knowledge concerning the use of appliance. Specifications Output Voltage: 8.4 -9.6V Amperage: 1100-1600mAh Input Voltage: 100 - 240V Brand: Tenergy Chemistry: NiMH Compa

Features and Benefits: * Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). * Please use the charger for battery packs with capacity of 1100-1600mAh. * Able to auto distinguish bad battery and indicate malfunction. * Able to activate over-discharged cells. * Current ram-up way benefits cell capacity and life cycle. * Unique test mode guarantees high quality. * Automatically stop when battery pack is fully charged by Delta Peak detection. * Short circuit & reverse polarity protections. * Compact battery pack charger with LED. * Built in mini female tamiya connector. Includes: * Smart AC Charger for 8.4 - 9.6V NiMH Battery Pack. * Instruction Manual. * Packaged in box. Specifications: Rating Input Voltage 100~240V AC 50/60Hz Rating input current 2Amp Input power <11W Output voltage Rating 8.4V/9.6V VDC Output voltage range 7V DC~12DC Charge Current 600+_60mA Trickle Current 200+_20mA Max Output Power 7.3W Operating Temperature -10~30*C (UL Certification) Charging Temperature <60?C Storage Temperature -30~85*C Maximal -Delta V 5mV/cell Cell Voltage <1.56V/cell Operating Humidity <90% RH Warning: * This appliance is not intend to be used by persons (including children) with reduced physical, sensory, mental capacities, or lack of experience and knowledge concerning the use of appliance. * Children should be supervised to ensure that they do not play with the appliance.

Smart Charger for 8.4-9.6V NiMH Batteries Mini Tamiya Tenergy Smart Charger for 8.4-9.6V NiMH Battery Packs Mini Tamiya Features and Benefits: Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). Please use the charger for battery packs with capacity of 1100-1600mAh. Able to auto distinguish bad battery and indicate malfunction. Able to activate over-discharged cells. Current ram-up way benefits cell capacity and life cycle. Unique test mode guarantees high quality. Automatically stop when battery pack is fully charged by Delta Peak detection. Short circuit & reverse polarity protections. Compact battery pack charger with LED. Built in mini female tamiya connector. UL Certified Warning: This appliance is not intend to be used by persons (including children) with reduced physical, sensory, mental capacities, or lack of experience and knowledge concerning the use of appliance. Specifications Output Voltage: 8.4 -9.6V Amperage: 1100-1600mAh Input Voltage: 100 - 240V Brand: Tenergy Chemistry: NiMH Compa

12V Tenergy 300mA Charger for 6.0V - 9.6V Batteries with Standard Female Tamiya Connector (Charger Side) Features Compact Battery Pack Charger with LED Built in Standard Female Tamiya connector Charges 6.0-9.6V NiMH and NiCd Battery Pack Details Manufacturer: Tenergy

1 x Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 7.2v - 12v Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection. Weight: 10.7 oz Accessories Included: 1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. 1 Temperature sensor Smart Charger Specification: FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY Input: AC100-240V Output: 7.2-12V 0.9or1.8A

* Maha Energy 4 cell charger for 9V w/ car kit, can charge 7.2V, 8.4V and 9.6V NiMH batteries. Only compatible with NiMH batteries. * Charge Current: 70-90mA x 4Ch * Trickle Charge Current: 5mA * Charging Cell Configuration: 1, 2, 3, or 4 9V NiMH rechargeables * Microprocessor: Negative Delta V, Zero Delta V, Temperature and Timer * Power Supply Voltage: 100-240V AC wall adapter and 12V 1000mA CLA Unlike traditional NiMH batteries, IMEDION can be stored for an extended period of time without substantial loss of power and are ready to use out-of-package. As the name suggests, the IMEDION batteries will be "ready when you are!" A common problem that plagues rechargeable batteries is that they need to be recharged about once every one to three month even if they are not used. Maha tackled this issue by developing advanced electrode materials to reduce the rate of power loss during storage. As a result, the IMEDION batteries retain up to 85% of its charge even after one year of storage (at a room temperature of 20 deg C). The IMEDION batteries differ from the competition in that they boast a longer lifetime as well as increased power retention under warmer environments. The IMEDION batteries can be recharged for hundreds of times and perform extraordinarily well at elevated temperatures. In addition, the IMEDIONS feature a low-impedance design and can deliver a high burst of current.

otgairsoft Store Product Features Product Features Universal Auto Smart Charger for Airsoft/RC Battery Packs: 7.2v - 12v 6-10 Cells Output: 0.9Amp or 1.8Amp, compared to standard wall charger (0.2A - 0.5A) Output Voltage: 7.2V - 12V, Auto Detect Cut off, Never Over Charge/Damage your Battery Cells: 6 - 10, Auto Detect the Number of Cells LED Light Indicator: Red = Charging / Green = Complete Size: Large Small Tamiya Plugs are included Chemistry: NiMH NiCad, Will Detect and Charge Either Battery

Features and Benefits * Compact Battery Pack Charger with LED * Input: AC 110V, Wall Plug * Output: DC 12V, 300mA charge. * Built in Standard Female Tamiya connector * Reliable 12V DC Power Supply * Charges 6.0-9.6V NiMH and NiCd Battery Pack * Individual white box packed.

Untitled Document PRODUCT SEARCH: Search Titles Descriptions Visit my eBay store Add this store to favorites Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/ Mini Tamiya + Add'l Adapter Specifications Description This listing contains: 1 x Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/ Mini Tamiya Connector 1 x Mini Tamiya (Female) to Standard Tamiya (Male) Adapter Popular for mini Airsoft NiMH Battery Packs. Now Compatible with 8.4v/9.6v Large Flat Packs with Included Mini

Airsoft Smart Charger NiMH / NiCd 7.2V - 12V (0.9A or 1.8A) Features Features and Benefits Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection. Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included 1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. Smart Charger Specification FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY Input: AC100-240V Output: 7.2-12V 0.9or1.8A Operation Instruction Don't leave the batteries and chargers

Airsoft Smart Charger NiMH / NiCd 7.2V - 12V (0.9A or 1.8A) Features Features and Benefits Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection. Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included 1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. Smart Charger Specification FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY Input: AC100-240V Output: 7.2-12V 0.9or1.8A Operation Instruction Don't leave the batteries and chargers

Airsoft Smart Charger NiMH / NiCd 7.2V - 12V (0.9A or 1.8A) Features Features and Benefits Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection. Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included 1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. Smart Charger Specification FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY Input: AC100-240V Output: 7.2-12V 0.9or1.8A Operation Instruction Don't leave the batteries and chargers