Shopping Search

No Description

PRESTO BATTERY POWERED LIFT COUNTER BALANCED STACKER TRUCK A logical alternative to a conventional stacker whose extended legs interfere with work surfaces or racks. Perfect for feeding machinery or lifting to mezzanines, as there is no outriggers or straddle legs to get in the way. 12 volt battery powered hydraulic lift offers lift speed of 5" per second. Integral 10 amp automatic tapering battery charger, battery status gauge and quick-disconnect battery cables (no tools required). Mitered forks adjust 6-1/2" to 20" O.D. between the wheels and lower to 1" above floor. Rolls easily on 5" diameter wheels and includes safety floor lock. 80"H overall. Includes necessary counterweight required to achieve lift capacity. Click here to see our Presto Power Stak Fully Powered Counter Balanced Stackers.

AWG #2/0 Red Battery Interconnect Cable 6" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 6 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 6" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealing w

Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units. 25 feet of DC extension cord Plugs into all Deltran Battery Tenders Allows access to Battery Tender from 30 feet from the battery Perfect for use with the multi-bank chargers

Battery Tender Quick Disconnect Charger Extension Cable Battery Tender Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units. Not for use with 6 Volt Battery Tender Plus or any other Battery Tender product with white disconnect plugs. 25 foot Cable Model#: 081-0148-25 Product Features · 25 feet of DC extension cord · Plugs into all Deltran Battery Tenders · Perfect for use with the multi-bank chargers 12.5 foot Cable Model#: 081-0148-12 Product Features · 12.5 feet of DC extension cord · Plugs into all Deltran Battery Tenders

PRESTO BATTERY POWERED LIFT COUNTER BALANCED STACKER TRUCK A logical alternative to a conventional stacker whose extended legs interfere with work surfaces or racks. Perfect for feeding machinery or lifting to mezzanines, as there is no outriggers or straddle legs to get in the way. 12 volt battery powered hydraulic lift offers lift speed of 5" per second. Integral 10 amp automatic tapering battery charger, battery status gauge and quick-disconnect battery cables (no tools required). Mitered forks adjust 6-1/2" to 20" O.D. between the wheels and lower to 1" above floor. Rolls easily on 5" diameter wheels and includes safety floor lock. 92"H overall. Includes necessary counterweight required to achieve lift capacity. Click here to see our Presto Power Stak Fully Powered Counter Balanced Stackers.

Battery Tender Power Tender Plus 12-Volt Compact Charger is designed for portable operation and has convenient built-in compartment for accessory cable storage. It charges and maintains both flooded and sealed maintenance free AGM lead acid batteries. The float and maintenance function maintains batteries at proper storage voltage eliminating the damaging effects caused by trickle chargers. The Portable Power Tender Plus compact charger is easy to use, rugged, compact and packed with power. It features universal input voltage ranging between 100-volts and 240-volts AC at 50-60 Hertz and provides 12-volts output DC at 5-Amps or 2.5-Amps.

Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units. 25 feet of DC extension cord Plugs into all Deltran Battery Tenders Allows access to Battery Tender from 30 feet from the battery Perfect for use with the multi-bank chargers

You are buying Super Conductive Solar Battery Cables. 4/0 Size 10.5" Eye to Eye 5/16" Eye Option of Red, Black or Red & Black ends UL Approved Wire - rated for up to 600 Volt 100% Copper Construction HEAVY WALL HEAT SHRINK for added barrier against moisture, dirt, gas, oil, acid and other contaminants Hefty Lugs Meets SAE J1127 and NEC Specs Ideal for use on most solar battery installations including: Golf Cart (T105), L16 and industrial 2 volt cells. .078" Insulation thickness Designed for up to 600 Volt applications 360 Amp conductor ampacity (free air) 10.5" Length perfect for all inter-battery sizes (Golf Cart, L16 and 2 Volt Industrial). CUSTOM BATTERY CABLE SIZES AVAILABLE FOR A QUICK TURNAROUND...

5 Bank Battery System, Sparkproof, Voltage Rating 12, A, Lead Size 6 Ft, Ac Cord 6 Ft., Input 110 Vac, Overall Width 6-3/4 In., Overall Height 6-3/4 In., Overall Depth 16-1/2 In., Battery Charging And Maintenance, Cable Gauge 8, Test Feature Led, Includes Quick Disconnect Rings And Alligator Clips

The 4 Bank Battery Tender Charging Station is four encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Each of the 4 leads is 27.25" long and has a positive and negative alligator clip. Additional Cables that come with the Battery Tender: Qty Cable Length 4 Ring Terminal Cable 2 Ft. Long 4 Alligator Clips 2 Ft. Long These battery tenders are never used and are never over thirty days old! 4 independant charging stations. 12 volts @ 1.25 amps per station. Extremely Lightweight - Less than 3 pounds! 100-240 VAC 50/60Hz.

You are purchasing a 4 Pack of Black Battery Tender Quick Disconnects. For 12 volt models only. 2 ft. 2 feet long. Comes with 7.5 amp fuse. This auction is for one brand new Auxiliary battery tender cable. This cable is a fused 7.5 amp cable that can be used to either replace worn/damaged cables or to charge more than one battery at a time. This cable will directly connect to your battery. This cable features SAE 2 pin on one end, 5/16" Ring Terminals on the other. It comes with dust cap on the SAE 2 pin connectore This cable is compatible with the Battery Tender Plus, Battery Tender Jr. and the Battery tender Water-proof chargers.

SMART cables are designed to monitor the voltage of a battery and indicate when it’s time to recharge it. When batteries are stored, even if they are not used, the voltage will slowly go down. If the battery is allowed to go too low in voltage it becomes damaged (sulphated). SMART cables indicates when a battery needs recharging well ahead of sulphation. SMART cables plug into most battery chargers, maintainers, tenders, or solar panels. When the red LED comes on, just plug any of these devices into the SMART Cable and recharge the battery. Choose between our unique battery terminal connection, cigarette lighter connection or battery clip-on connectors. The bright yellow cable eliminates accidental disconnects. Our high quality gold plated connectors also provide a simple but improved mounting design.

PRESTO BATTERY POWERED LIFT COUNTER BALANCED STACKER TRUCK A logical alternative to a conventional stacker whose extended legs interfere with work surfaces or racks. Perfect for feeding machinery or lifting to mezzanines, as there is no outriggers or straddle legs to get in the way. 12 volt battery powered hydraulic lift offers lift speed of 5" per second. Integral 10 amp automatic tapering battery charger, battery status gauge and quick-disconnect battery cables (no tools required). Mitered forks adjust 6-1/2" to 20" O.D. between the wheels and lower to 1" above floor. Rolls easily on 5" diameter wheels and includes safety floor lock. 80"H overall. Includes necessary counterweight required to achieve lift capacity. Click here to see our Presto Power Stak Fully Powered Counter Balanced Stackers.

Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 25 feet of DC extension cord Plugs into all Deltran Battery Tenders Allows access to Battery Tender from 30 feet from the battery Perfect for use with the multi-bank chargersbank units.

AWG #2/0 Red Battery Interconnect Cable 18" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 18 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 18" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealin

4 pack. Cardboard card for peg hook. Super extra power. High-density and precision technology. 5-star performance rated. Batteries & Chargers. AA Batteries.

25 feet of DC extension cord Plugs into all Deltran Battery Tenders Allows access to Battery Tender from 30 feet from the battery Perfect for use with the multi-bank chargers Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units.

Simple to install and easy to operate, this shut-off switch ensures that everything is disconnected. Attach the switch to either the positive or negative terminal of your battery and the cable to the switch. Then unscrew the knob and take it with you to disable your car and discourage thieves. On computer controlled vehicles from 1982 to present, use the Computer Memory Saver (25036) or Fuse Link (25049) to preserve the computer's settings when the battery is disconnected. The Fuse Link will allow enough current through to maintain computer, radio settings etc. but will not allow car to be started.To disable car, unscrew this knob from battery and take it with you The Deluxe Battery Shut off Switch works with your top post type battery. Attach to negative terminal only. Easy to use simply unscrew the knob a couple turns to break the circuit. The knob can be completely removed to serve as an anti-theft device.Simple to install and easy to operate, this shut-off switch ensures that everything is disconnected. Attach the switch to either the positive or negative terminal of your battery and the cable to the switch. Then unscrew the knob and take it with you to disable your car and discourage thieves. On computer controlled vehicles from 1982 to present, use the Computer Memory Saver (25036) or Fuse Link (25049) to preserve the computer's settings when the battery is disconnected. The Fuse Link will allow enough currect through to maintain computer, radio settings etc. but will not allow car to be started. Download instructions in PDF formatInstallation Instructions1. Be certain all accessories on vehicle are off(i.e., interior lights, under hood lights, etc.)2. Remove Battery Cable from Negative Battery Post.3. Clean Battery Post and inside Cable End.4. Slip Clamp end of Switch onto Negative BatteryPost and tighten securely.5. Slip Battery Cable onto post end of Switchand tighten securely.Use InstructionsTo Disconnect Turn green knob 1/2 turn counterclockwise.To Reconnect Turn green knob clockwise until secure.To Prevent unauthorized vehicle use Turn green knob counterclockwise and remove.Note To preserve vehicle computer settings or radio station settings, install Battery Shut Off Switch Fuse Link when battery is disconnected. This will allow enough current through to maintain settings, but will not allow vehicle to start. 046494300899 25053 30089 5597 726752960002 840220001056 ANTI THEFT ANTITHEFT DISABLE DISCONNECT EL14 BM03 ELECAC ELECTRICAL DIAGNOSTIC FUSE OF SIGNATURE LINE SIGNATURELINE START SHUT OFF STORAGE TEL0 TOP MOUNT

AWG #2/0 Red Battery Interconnect Cable 6" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 6 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 6" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealing w

25 feet of DC extension cord Plugs into all Deltran Battery Tenders Allows access to Battery Tender from 30 feet from the battery Perfect for use with the multi-bank chargers Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units.

AWG #2/0 Red Battery Interconnect Cable 18" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 18 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 18" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealin

AWG #2/0 Red Battery Interconnect Cable 12" with 3/8" Lugs Features AWG #2/0 Red Battery Interconnect Cable - 12 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks

AWG #2/0 Red Battery Interconnect Cable 18" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 18 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 18" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealin

Applications where the doors must not open in the event of a power failure 7AH rechargable batteries 12/24 VDC - 14 Amp hour battery pack Includes 2 each 7 AH 12 Volt with hook-up cables

A new era of rechargeable batteries has begun with Cycle Energy Blue. Simply insert the rechargeable batteries into your device straight after purchase and enjoy - no initial charging required. Unlike some rechargeable batteries, Cycle Energy Blue is useful in all every day devices.

AWG #2/0 Red Battery Interconnect Cable 12" with 3/8" Lugs Features AWG #2/0 Red Battery Interconnect Cable - 12 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks

AWG #2/0 Red Battery Interconnect Cable 6" with 3/8" Lugs Features AWG #2/0 Red Battery Interconnect Cable - 6 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks.

AWG #2/0 Red Battery Interconnect Cable 12" with 3/8" Lugs AWG #2/0 Red Battery Interconnect Cable - 12 Inches Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a Low-Voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative. Features of the 12" Cable Plated Copper Lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8" holes, soldered or crimped to a stranded cable. Heat-Shrink Tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealin