Shopping Search

Offering a pioneering blend of low voltage operation and all-internal installation, the Bio-Fighter Lightstick marks a new breed of germicidal UV system. All new 24V power supply mounts inside air handler control panel and connects remotely to a water-resistant UV lamp for a fast, simple installation. Multiple installation options. Install remote lamp via lamp bracket or directly into an A-coil delta plate.

The Ultra-Flex offers more value and choice than ever before in a UV light system. By combining compact size and remote-lamp capability, the Ultra-Flex provides a first-class UV system for installation in even the tightest spaces. It's in these tight HVAC applications where you will really appreciate the small 4in x 9in footprint. And 6-ft remote-lamp cords allow you to install the Ultra-Flex chassis on a wall, or even a ceiling! The Ultra-Flex offers more of what you want and have come to expect from the Bio-Fighter system.

The POWERMAX is a lightweight 22 lbs recovery system with the 1 horse-power oil-less Wizard compressor. No other recovery system on the market is this light with a 1 horsepower compressor. The unit has a durable plastic case design which recovers all high pressure refrigerants including R12, R134a, R22, R401, R402, R404, R406, R407, R409, R410A, R411, R412, R500, R502, R507, R509 as well as many other blends. Features * Easy two-hose refrigerant recovery system * Two connection system provides automatic, straight through, liquid vapor operation * Recovery rates up to 5 lbs/minute liquid and 1/2 lbs/minute vapor 4663239

Most non-electrical HVAC/R problems are charge related. Many systems in operation are undercharged or overcharged. This can cause decreased efficiency and compressor failure. The higher the efficiency of a system, the more critical it is that it is charged properly.

All of Fieldpiece's accessory heads work with the Fieldpiece Stick Meter. With the appropriate accessory head, this meter can measure the following parameters: AC amps, RH%, wet bulb temperature, air temperature, dew point, carbon monoxide, dual temperature, non contact (IR) temperature, air velocity, gas pressure, static pressure, vacuum, milliamps, microamps, and carbon dioxide. Accessory heads can also be connected to the meter using the removable-tip test leads for “remote" testing.

The SVG2 will allow the measurement of a deep vacuum from 50 to 2000. The reason for evacuating a HVACR system to such deep levels is to remove all contaminants(mainly moisture).The SVG2 is a portable standalone vacuum guage. The SVG2 comes in a rugged rubber boot. It also has an alarm that can alert you when a given vacuum is reached

Hi-voltage indicator you can't miss--both LED and beeper turn on to indicate you've touched a potentially dangerous voltage. Continuity indicated by LED and beeper. MAX hold automatically holds reading so you can look at the meter after you've disconnected. Low ohms ranges for motor windings and mid range for thermistors. Amps AC resolution to 0.01A for heat anticipator circuit (20A range). Up to 200AAC with 0.1V resolution

The most important benefit of the new SC67 is that it contains a non-contact voltage (NCV) function to warn the user when the NCV tab is close to live AC voltages. When it senses AC voltages down as low as 24VAC, it alerts the user by lighting up a big, bright red LED, AND sounding a loud beeper. Even if the user doesn't touch the voltage, the NCV function senses the ACV through the air.

No Description

The 9600 Series are the perfect thermostats for affordable home temperature control. This series was engineered to meet the heating and cooling needs a busy lifestyle demands. All models feature easy one button programming that can be set for both summer and winter at installation. Each thermostat will allow for temporary manual temperature adjustments. 9600- 1 Heat /1 Cool Automatic Compressor Short Cycle Protection- A system safeguard. Reduces wear and tear of HVAC equipment. Weekly 5 - 2 Day Programming- Set your weekly program once with four time and temperature settings. The four set points are followed for 5 consecutive days. On the weekend, both mid-day settings are automatically eliminated for all day comfort. Adjustable Temperature Differential- Maintains optimal customer comfort. Temporary Program Override - Allows for manual temperature adjustment. Low Temperature

Cover plate 7 7/8 x 5 1/2 inches (200 x 140 mm) Color: Premier White Used With TH8000 VisionPRO Series Thermostats

Easily carry what you need to the job site. No more “winging it" or long walks back to the truck. Carrying case designs make instrument access fast. If you need to measure gas, just add the “G" at the end of a Fieldpack's part number to include the manometer (AMN2) and carbon monoxide (ACM3) accessory heads.

Easily carry what you need to the job site. No more “winging it" or long walks back to the truck. Carrying case designs make instrument access fast. If you need to measure gas, just add the “G" at the end of a Fieldpack's part number to include the manometer (AMN2) and carbon monoxide (ACM3) accessory heads.

The SDMN5 is a portable standalone dual port manometer. The SDMN5 is capable of taking gas pressure as well as static pressure. The SDMN5 has a zero adjust and a hold button to hold the currently displayed reading. The auto power off function conserves battery life, but can be disabled if desired.

The Fieldpiece Carbon Monoxide Accessory Head enables most digital multimeters to measure low levels of carbon monoxide in parts per million (PPM). It is intended to measure levels of CO in still ambient air. In many cases, it can pinpoint sources of CO. It uses a catalytic chemical sensor that consumes no chemicals. The most pratical application is to determine if the indoor CO levels are higher than outdooor levels and to determine the source.

Easily carry what you need to the job site. No more “winging it" or long walks back to the truck. Carrying case designs make instrument access fast. If you need to measure gas, just add the “G" at the end of a Fieldpack's part number to include the manometer (AMN2) and carbon monoxide (ACM3) accessory heads.

The Fieldpiece Stick Meter with Auto Ranging tests microamps for flame rectifier diode tests and the ability to measure frequency.All of Fieldpiece's accessory heads work with the Fieldpiece Stick Meter. With the appropriate accessory head, this meter can measure the following parameters: AC amps, RH%, wet bulb temperature, air temperature, dew point, carbon monoxide, dual temperature, non contact (IR) temperature, air velocity, gas pressure, static pressure, vacuum, milliamps, microamps, and carbon dioxide.

The Fieldpiece Milliamps and Microamp Accessory Head coverts microamps for (rectifier diode) and milliamps to a mV signal for direct current reading on any meter with mV ranges. For resolution of 0.1 micro/milliamps use a meter that displays 0.1 mV. The Fieldpiece Milliamps and Microamp Accessory Head along with the included quick connect and mini-plug adapters converts the Fieldpiece stick meter (HS33), data logger (DL2) and electronic handle (EHDL1) to a one-piece flame rectifier diode tester.

These test leads are unmatched in ruggedness and flexibility. Extremely flexible 385 stranded copper wire bends very easily offering lower resistance than test leads with fewer strands. The silicone insulation maintains its silky smooth flexibility even at low temperatures. At high temperatures, it will withstand the touch of a soldering iron. And it is chemically inert to withstand exposure to most caustic chemicals.

The AG-2550E electronic water sensor is located in-line on the primary drain line and is integrated with an access port for clearing and removing clog causing debris. The water sensor has no moving parts and the unique design of the insulated housing allows the application of chemicals to clean the drain without any worry of retrograde back flow into your HVAC unit. Product Features: Electronic in-line water sensor with insulated housing and access port. Unobstructed 3/4" flow-switch does not impede drainage. Integrated easy access port for cleaning out drain lines and adding chemicals. Horizontal or vertical in-line float system with insulated housing. What's Included: AG-3000E control box 6' control wire 6' probe wire 1" threaded straight adapter 1" threaded elbow adapter Insulated housing Electronic probe cap AG-2550E

The Fieldpiece Manometer Accessory Head measures gas pressure and has resolution low enough for static pressure. It measures pressure, both positive and negative, from -20"WC (water column) to +20"WC. When the 2"WC range is selected, 0.01"WC resolution is obtained with a standard 2000 count digital multimeter. The Fieldpiece Manometer Accessory Head snaps into the Fieldpiece stick meter (HS35)or the electronic handle (EHDL1) for a direct readout. Connect to any digital multimeter with industry standard jacks and a mVDC range with 0.1 resolution using the adapter handle AHDL1) for a direct readout.

The vertical 70 Series low-profile design blends narrow width with new home decors. The universal subbase, for use with all 1E78 models, is designed to mount on a 2" x 4" junction box or directly to the wall. There is also an optional wallplate for use in retro-fit applications. The 70 Series thermostats are battery powered, making them easy to install and compatible with most heating and cooling systems. The vertical 70 Series is perfect for new construction customers who want a quick and easy transition to job completion.

These high efficiency air filters are designed specifically for your Mitsubishi Ductless System. They remove fine particles as small as one-tenth of a micron. (about 1/240, 000 inch). They are fast and easy to install - simply replace the filter every four months or when noticeably dirty. A clean, high efficiency filter not only cleans the air you breathe but helps protect your air conditioning system from contamination and keeps your operating costs to a minimum.

The Fieldpiece Electronic Handle converts any Fieldpiece accessory head into a stand alone instrument. The Fieldpiece Electronic Handle has ranges to display the parameter without forcing you to move decimal points in your head while still providing 0.1mV resolution.

Fieldpiece Infrared Thermometer Accessory Head measures temperature by collecting infrared energy emitted by target and converting it to a mVDC signal for direct current reading on any meter with mV ranges. Non-contact infrared temperature measurement works best if you cannot touch the test point or if you are looking fot the hottest or coldest area. IR temperature readings can vary with angle, and how reflective the surface is.

These high efficiency air filters are designed specifically for your Mitsubishi Ductless System. They remove fine particles as small as one-tenth of a micron. (about 1/240, 000 inch). They are fast and easy to install - simply replace the filter every four months or when noticeably dirty. A clean, high efficiency filter not only cleans the air you breathe but helps protect your air conditioning system from contamination and keeps your operating costs to a minimum.

Includes alligator clips so that you can just clip to the spot you're testing. You no longer need three hands to do your job. All three pipe clamps are redesigned to provide faster and more accurate pipe temperatures.

Use your digital multimeter, data logger, or handle to measure parameters needed by HVAC/R technicians. Fieldpiece accessories work with meters that have mV (AC and DC) ranges and industry standard input jacks. Use the Fieldpiece deluxe test leads or the convenient AHDL1 adapter handle to connect any accessory head to most digital multimeters. The ACH4 works with the Fieldpiece "Stick meter, EHDL1 Electronic Handle, DL2 Data Logger, or any digital multimeter (with mVAC range) connected by Fieldpiece ADLS2 leads or AHDL1.