Shopping Search

Reducing Tee, Nominal Size 1 X 3/4 X 1 In., Outside Dia. 1-1/8 X 7/8 X 1/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 494 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducing Tee, Nominal Size 3/4 X 1/2 X 1/2 In., Outside Dia. 7/8 X 5/8 X 5/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 582 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

PEX Fittings PROBite Low Lead, PROBITE TEE 1/2" CTS. CONNECTS 1/2" CTS PIPE. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

Reducing Tee, Nominal Size 1 X 1 X 3/4 In., Outside Dia. 1-1/8 X 1-1/8 X 7/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 494 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

C x C x C 1 x 1 x 3/4 611R ANSI Specs Meets ATSM standards, Manufacturer: PlumBest

Ez-Flo 90838 A/C Disconnect Features: A/C DISCONNECT 30 Amp - Fused For use with aluminum or copper conductors Easy on, easy off disconnect pullout Knockouts provided on the back, bottom and side for all applications NEMA 3R rainproof enclosure for outdoor use Ebuildersmerchant Return Policy:Wrong Shipment. If you were shipped a different product than you ordered, please contact us within 48 hours of receiving the product. We will provide an RGA number and instructions on how and where to ship

Reducing Tee, Nominal Size 3/4 X 3/4 X 1 In., Outside Dia. 7/8 X 7/8 X 1-1/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 494 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

5/8" O.D. (1/2" nominal copper) compression x 3/8" O.D. Do it angle connector. 1 per card. Chrome-plated. Do it carded.

Reducing Tee, Nominal Size 1/2 X 1/2 X 3/4 In., Outside Dia. 5/8 X 5/8 X 7/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 582 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

PEX Fittings PROBite Low Lead, PROBITE COUPLING 1/2" CTS. CONNECTS 1/2" CTS PIPE. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

Reducing Adapter, Nominal Size 1/2 X 3/8 In., Outside Dia. 5/8 X 3/8 In., Connection C X Fnpt, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Return Bend, Nominal Size 1/2 X (2 In. C To C), Outside Dia. 5/8 (2 In. C To C) In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Low-lead brass compression male adapter 1/4-Inch by 1/2-Inch male pipe Unique Ander-Lign compression fitting is the only fitting that is completely assembled with a captive sleeve The bodies are interchangeable with standard compression For use with copper, brass, aluminum, and plastic tubing Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures, Manufacturer: Watts

Reducing Adapter, Nominal Size 1/2 X 3/4 In., Outside Dia. 5/8 X 3/4 In., Connection C X Fnpt, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducing Tee, Baseboard, Nominal Size 3/4 X 1/8 X 3/4 In., Outside Dia. 7/8 X 1/8 X 7/8 In., Connection C X Fnpt, Material Of Construction Cast Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 582 Psi @ 100 Degrees F, Standards Ansi B16.18

PEX Fittings PROBite Low Lead, PROBITE REDUCING ELBOW 3/4" CTS X 1/2" CTS. CONNECTS 3/4" & 1/2" CTS PIPE. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

Reducing Tee, Nominal Size 1/2 X 3/8 X 1/2 In., Outside Dia. 5/8 X 1/2 X 5/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Coupling Without Stop, Nominal Size 1/2 In., Outside Dia. 5/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducer, Nominal Size 1/2 X 1/4 In., Outside Dia. 5/8 X 3/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducer, Nominal Size 1/2 X 3/8 In., Outside Dia. 5/8 X 1/2 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

PEX Fittings PROBite Low Lead, PROBITE DROP EAR ELBOW 1/2" CTS X 1/2" FPT (3-EAR). CONNECTS 1/2" CTS PIPE AND 1/2" MALE PIPE THREADS. COMMONLY USED TO CONNECT TO A SHOWER ARM OR OUTSIDE SPIGOT. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

Reducer, Nominal Size 1-1/2 X 1-1/4 In., Outside Dia. 1-5/8 X 1-3/8 In., Connection C X Ftg, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 408 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducer, Nominal Size 1-1/4 X 1 In., Outside Dia. 1-3/8 X 1-1/8 In., Connection C X Ftg, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 439 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Reducer, Nominal Size 1 X 3/4 In., Outside Dia. 1-1/8 X 7/8 In., Connection C X Ftg, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 494 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Cap, Nominal Size 1 In., Outside Dia. 1-1/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 494 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

PEX Fittings PROBite Low Lead, PROBITE FEMALE ADAPTER 1" CTS X 1" FPT. CONNECTS 1" CTS PIPE AND 1" MALE PIPE THREADS. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

"B & K" DI-ELECTRIC UNION 1" FIP x 1" Copper Sweat For water to 210 deg. F Protects pipe from galvanic corrosion Galvanized steel Brass socket Boxed

PEX Fittings PROBite Low Lead, PROBITE FEMALE ELBOW 1/2" CTS X 1/2" FPT. CONNECTS 1/2" CTS PIPE AND 1/2" MALE PIPE THREADS. PROBITE IS COMPATIBLE WITH CTS (COPPER TUBING SIZE) PIPE, SUCH AS COPPER, CPVC AND PEX. WHEN USING PROBITE FITTINGS WITH PEX PIPE, ALWAYS USE THE HI-FLO STIFFENER (SOLD SEPARATELY). NO SOLDER, GLUE OR CRIMPING REQUIRED! INSTALLS IN SECONDS! JUST PUSH TO CONNECT AND YOU'RE DONE! THESE FITTINGS ARE TESTED AND APPROVED FOR POTABLE WATER, HEATING, IN-WALL (NO ACCESS) AND BELOW GROUND APPLICATIONS. PROBITE FITTINGS ARE CONSTRUCTED OF HIGH QUALITY LOW LEAD BRASS APPROVED FOR CALIFORNIA AND VERMONT. THEY FEATURE A DISCONNECT SYSTEM THAT MAKES PROBITE FITTINGS BOTH REMOVABLE AND REUSABLE WITHIN SECONDS! TO USE A PROBITE FITTING, FIRMLY PUSH THE FITTING ONTO A CTS PIPE. THE CONNECTION IS COMPLETE WHEN THE FITTING IS PUSHED ALL THE WAY ONTO THE PIPE. TO REMOVE A PROBITE FITTING, SNAP THE DISCONNECT TOOL AROUND THE PIPE AND PRESS FIRMLY AGAINST THE FITTING WHILE PULLING THE FITTING OFF THE PIPE. TO REUSE THE FITTING, PUSH THE FITTING BACK ONTO ANOTHER PIPE. PROBITE LOW LEAD FITTINGS DO NOT MEET CALIFORNIA AB1953 VERMONT LEAD-FREE REQUIREMENTS

Union, Nominal Size 1/2 In., Outside Dia. 5/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 722 Psi @ 100 Degrees F, Standards Ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt

Cap, Nominal Size 1-1/2 In., Outside Dia. 1-5/8 In., Connection C X C, Material Of Construction Wrot Copper, Temp. Range -20 To 400 Degrees F, Max. Pressure 408 Psi @ 100 Degrees F, Standards Asme/ansi B16.22, Compliance Certified For Use In Potable Water Applications In Ca And Vt