Shopping Search

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Welding Soldering Tools Welding Wires Er70S-6 045X264:100-Er70S-6-045X264 -er70s-6 045x264 Set of: 264 OUR SKU# ANR5770 MPN: 100-ER70S-6-045x264 Condition Brand New Shipping Free Shipping Leaves warehouse within 24 to 48 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We

6914 Nachi Open Ball Bearing 70mm x 100mm x 16mm Made in Japan 6914 Nachi Bearing, the 6914 inner diameter is 70mm, the 6914 outer diameter is 100mm, 6914 width is 16mm. * Item: 6914 Nachi Ball Bearing * Type: Nachi Deep groove Ball Bearing * Dimensions: 70mm x 100mm x 16mm/Metric * ID (inner diameter)/Bore: 70mm * OD (outer diameter): 100mm * Width/Height/thickness: 16mm * Size: 70 x 100 x 16 mm * Quantity: One Bearing * Dynamic load rating Cr: 23, 700 N * Static load rating Cor: 21, 100 N * Limiting Speed: * Grease Lubrication: 6, 500 RPM * Oil Lubrication: 7, 700 RPM * Made in Japan Nachi Deep Groove Ball Bearings Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known as Extra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating at very high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease in advance.

No Description

Olson Flex Back Bandsaw Blades are a cut above regular flex back carbon blades! Special heat treatment produces a blade with an extremely hard cutting edge and a spring-tempered back for increased tensile strength. This permits greater tension, improved blade rigidity, and straighter, more accurate cuts. All Olson Flex Back blades are made with alternate bevel teeth and one raker tooth. Raker set: left, right, straight (raker) pattern.

6914-2RS Sealed Ball Bearing 70mm x 100mm x 16mm 6914-2RS double sealed, radial and deep groove ball bearing, 6914-2RS bearing is made of Chrome Steel with chrome steel balls and steel cage, bearing is closed with rubber seals to protect the bearing from dust or any possible contamination, bearing is self lubricated, 6914-2RS bearing is already greased. Item: 6914-2RS Ball Bearing Type: Deep Groove Radial Ball Bearing Cage: Steel Balls: Chrome Steel Radial Clearance: C0 Material: Chrome Steel Quality: Electric motor quality Lubrication: Self Lubricated (Grease) Bearing Closures: Double sealed with rubber seals RS/RS1/2RS1 Size: 70mm x 100mm x 16mm Inner Diameter (ID): 70mm Outer Diameter (OD): 100mm Width/Height/Bridth (W/H/B): 16mm Quantity: One Bearing Dynamic load rating Cr: 23, 700 N Static load rating Cor: 21, 200 N Limiting Speed: Grease Lubrication: 6, 400 RPM

No Description

Fewer jams Engineered to fit other manufacturers tools More completed drives Highest withdrawal values Less broken collation, Weight: 7 lbs., Manufacturer: Senco

Contains electronic polarized media to provide maximum ozone-free air cleaning. When particles and volatile organic compounds (VOC's) pass through the filter system, they become polarized. These polarized particles join together to form bigger clusters that are more easily captured and collect on a disposable fiberglass medium pad with an activated carbon center screen.

#15 x 6 High Speed Aircraft Bit Cobalt - Manufactured to NAS 907 Type J specifications. Jobber flute lengths for drilling holes hard to reach places. Heavy duty construction for portable or machine drilling. For use in drilling in high tensile strength alloy steels, stainless steels, titanium and other difficult to machine materials. Made in the USA.

General Pipe Cleaners Sectional Machine w/ (6) 7-1/2'x5/8" & (5) 15'x7/8" Cables, Cable Carrier, Cutter Set & Tool Box The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drainwork, slip on a drum that holds smaller cables. To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle, and the Root 66 starts spinning the cable at 400 rpm. The cable stops rotating as soon as you lift the handle, so there's no additional torque buildup. When using a drum for small drain work, the drum stops turning when you lift the handle to the neutral position. The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A Ground Fault Circuit Interrupter is standard equipment. Store cutters in the included tool box. 17.00 L. 16.00 W. 14.00 H.

61814 Ball Bearing 70x90x10 mm Chrome Steel Quality: ABEC 1 Chrome Steel Open Ball Bearing 61814 that has ABEC 1 quality, 61814 bearing is a popular item that could be used in many applications, the dimensions are 70x90x10 mm, 61814 bearing is Open, 61814 bearing is Oil preserved. * Item: Single Row Radial Bearing * Type: Deep groove Radial ball bearings * Quality: ABEC 1 * Material: Chrome Steel * Cage: Chrome Steel * Closures: Open * Lubrication: Oil * Dimensions: 70mm x 90mm x10mm/Metric * ID (inner diameter)/Bore=70mm * OD (outer diameter)=90mm * Width/Height/thickness=10mm * Size: 70mm x 90mm x 10mm * Quantity: One Bearing * Dynamic load rating Cr: 12, 100 N * Static load rating Cor: 11, 900 N * Limiting Speed: * Grease Lubrication: 7, 000 RPM * Oil Lubrication: 8, 100 RPM

No Description

No Description

No Description

T15 Star Bit x 2" - 3mm stock size. Bondhus ProHold socket bits are designed to be strong and save time and money. Our unique holding buttons "snap" the bit securely into any six point socket, allowing the tool user to buy just the bit, rather than an expensive socket and bit assembly. Bondhus ProHold socket bits do not require use of roll pins or set screws to hold the bit in the socket. Bondhus exclusive manufacturing processes ensure the highest level of machining consistency as each ProHold socket bit is machined to incredibly tight tolerances. All Bondhus ProHold socket bits are manufactured from Bondhus exclusive Protanium Steel, which is up to 20-percent stronger than competitor tools, and finished with it's proprietary ProGuard corrosion resistant finish. ProHold socket bits are protected by US and foreign patents, ensuring ProHold socket bits are only available from Bondhus.

6914 Nachi Open Ball Bearing 70mm x 100mm x 16mm Made in Japan 6914 Nachi Bearing, the 6914 inner diameter is 70mm, the 6914 outer diameter is 100mm, 6914 width is 16mm. Item: 6914 Nachi Ball Bearing Type: Nachi Deep groove Ball Bearing Dimensions: 70mm x 100mm x 16mm/Metric ID (inner diameter)/Bore: 70mm OD (outer diameter): 100mm Width/Height/thickness: 16mm Size: 70 x 100 x 16 mm Quantity: One Bearing Dynamic load rating Cr: 23, 700 N Static load rating Cor: 21, 100 N Limiting Speed: Grease Lubrication: 6, 500 RPM Oil Lubrication: 7, 700 RPM Made in Japan Nachi Deep Groove Ball Bearings Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a

No Description

Specifications: Bearing Specifications: Inner Diameter: 15 Outer Diameter: 32 Thickness: 9 System: Metric Bearing Type: Radial Bearing Product Seal: No Seal (N) Ball Material: Stainless Steel Condition: New Inventory From Factory. Operating Temperature: Sealed or Metal Shields Ranges: 20 °F to +230°F [30 °C to +110°C]. There is no accurate way to easily tell the difference between stainless and chrome steel bearings. Stainless Steel Bearings Premium 440C stainless steel bearings help reduce rust and corrosion. Please note that hardened 440C stainless steel is considered a corrosion resistant steel and can rust under extreme conditions. The main difference is that stainless steels have around 18% chrome content compared to around 1-2% for chrome steel. Martensitic stainless steels such as 440C are attracted to magnets. Hybrid Ceramic Bearings A hybrid ceramic bearing can provide more rpm, less weight, and less drag. Our bearings use only high quality Silicon Nitride ceramic balls. This material is extremely

6914-2RS Sealed Ball Bearing 70mm x 100mm x 16mm 6914-2RS double sealed, radial and deep groove ball bearing, 6914-2RS bearing is made of Chrome Steel with chrome steel balls and steel cage, bearing is closed with rubber seals to protect the bearing from dust or any possible contamination, bearing is self lubricated, 6914-2RS bearing is already greased. * Item: 6914-2RS Ball Bearing * Type: Deep Groove Radial Ball Bearing * Cage: Steel * Balls: Chrome Steel * Radial Clearance: C0 * Material: Chrome Steel * Quality: Electric motor quality * Lubrication: Self Lubricated (Grease) Bearing * Closures: Double sealed with rubber seals RS/RS1/2RS1 * Size: 70mm x 100mm x 16mm * Inner Diameter (ID): 70mm * Outer Diameter (OD): 100mm * Width/Height/Bridth (W/H/B): 16mm * Quantity: One Bearing * Dynamic load rating Cr: 23, 700 N * Static load rating Cor: 21, 200 N * Limiting Speed: * Grease Lubrication: 6, 400 RPM

T15 Star bit x 6" - 3mm stock size. Bondhus ProHold socket bits are designed to be strong and save time and money. Our unique holding buttons "snap" the bit securely into any six point socket, allowing the tool user to buy just the bit, rather than an expensive socket and bit assembly. Bondhus ProHold socket bits do not require use of roll pins or set screws to hold the bit in the socket. Bondhus exclusive manufacturing processes ensure the highest level of machining consistency as each ProHold socket bit is machined to incredibly tight tolerances. All Bondhus ProHold socket bits are manufactured from Bondhus exclusive Protanium Steel, which is up to 20-percent stronger than competitor tools, and finished with it's proprietary ProGuard corrosion resistant finish. ProHold socket bits are protected by US and foreign patents, ensuring ProHold socket bits are only available from Bondhus.

Description: No. 2 Blade-Large fine point blade for precison cu. Package Quantity: 12.000. MSC Logo: XACTO-91. Brand Name: X-ACTO. Type: No. 2 Large Fine Point. Material: 1095 Carbon Steel. Number of Pieces: 15. Overall Length: 1.885., Manufacturer: X-Acto

6014ZZ Double Shielded Ball Bearing 70 x 110 x 20 mm One Bearing 6014ZZ Chrome steel Shielded Ball Bearing, 6014ZZ is Electric motor quality, 6014ZZ Bearing is a popular item that could be used in many application that uses this size 70mm x 110mm x 20mm, each 6014ZZ bearing is closed with 2 Metal Shields, bearing is one Shield from each side to protect the bearing from dust or any possible contamination, also 6014ZZ bearing is pre-lubricated with grease. * Item: 6014ZZ Ball Bearing * Type: Deep groove Radial Ball Bearing * Quality: Electric motor quality * Material: Chrome Steel * Cage: Chrome Steel * Closures: Double Metal Shields * Lubrication: Self Lubricated (Grease) Bearing * Dimensions: 70mm x 110mm x 20mm/Metric * ID (inner diameter)/Bore: 70mm * OD (outer diameter): 110mm * Width/Height/thickness: 20mm * Size: 70 x 110 x 20 mm * Dynamic load rating Cr: 38, 000 N * Static load rating Cor: 31, 000 N * Limiting Speed: * Grease Lubrication: 6, 100 RPM * Quantity: One Bearing 6014ZZ * Equivalents: 6014-2Z/6014-Z Bearing

No Description

6814 Open Ball Bearing 70mm x 90mm x 10mm Quality: ABEC 1 6814 Open Ball Bearing, Material is Chrome Steel, 6814 has ABEC 1 quality, 6814 bearing is Oil preserved, inner diameter is 70mm, outer diameter is 90mm and width is 10mm. * Item: 6814 Ball Bearing * Type: Deep groove Radial Ball Bearing * Closures: Open * Quality: ABEC 1 * Lubrication: Oil * Cage: Chrome Steel * Material: Chrome Steel * Dimensions: 70mm x 90mm x 10mm/Metric * ID (inner diameter)/Bore: 70mm * OD (outer diameter): 90mm * Width/Height/thickness: 10mm * Size: 70 x 90 x 10 mm * Quantity: One Bearing * Dynamic load rating Cr: 12, 100 N * Static load rating Cor: 11, 900 N * Limiting Speed: * Grease Lubrication: 7, 000 RPM * Oil Lubrication: 8, 100 RPM

General Equipment EP8DC15 General's line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline, 12 VDC or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. This BLOW-R-PAC Non-Hazardous Location Air Ventilation Blower with 8" x 15' Flexible Duct is constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing. Features: -Complete with 8 inch diameter x 15 foot flexible duct and integral storage canister -BLOW-R-PAC -Permanent magnet motor -50 ampere battery terminal connections -8 inch outlet diameter -12 gauge -lockable cover -Spun steel blower diameter -Aluminum and composite fan construction -Rubber anti-vibration mounting -Less duct. Specifications: -Engine Type: 1/6 HP (.13kw), 12Volt, DC -RPM: 3450 -Speed Control: Single Speed -Blower Type: Radial -Material: Spun Steel -Wheel Type: Aluminum/plastic MultiWing axial -Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet -Mounting: Rubber -Type: Anti-Vibration -Free Air: 736.7 CFM (20.6 cmm) -One 90 Degree Bend: 686.4 CFM (19.2 cmm) -Two: 90 Degree Bends: 601.8 CFM (16.8 cmm) -Weight: 47 lbs -Overall Dimensions: 15"H x 13"W x 16"D Warranty: -2-Year 8" x 3' Standard Duct -8 inch nominal diameter x 3 foot length -Vinyl coated, synthetic fabric construction for extra service -Wire helix reinforcement with anti-scuff strip -Complete with cuff and securing straps on both ends -For use in non-hazardous locations only 8" x 6' Standard Duct -8 inch nominal diameter x 6 foot length -Vinyl coated, synthetic fabric construction for extra service -Wire helix reinforcement with anti-scuff strip -Complete with cuff and securing straps on both ends -For use in non-hazardous locations only 8" x 15' Standard Duct -8 inch nominal diameter x 15 foot length -Vinyl coated, synthetic fabric construction for extra service -Wire helix reinforcement with anti-scuff strip -Complete with cuff and securing straps on both ends -For use in non-hazardous locations only 8" x 25' Standard Duct -8 inch nominal diameter x 25 foot length -Vinyl coated, synthetic fabric construction for extra service -Wire helix reinforcement with anti-scuff strip -Complete with cuff and securing straps on both ends -For use in non-hazardous locations only 8" x 15' Insulated Duct -8 inch nominal diameter x 15 foot length -Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation --40o F to +250o F temperature range -Wire helix reinforcement with anti-scuff strip -Complete with nylon ring and securing strap on opposite ends -For use in non-hazardous locations only 8" x 25' Insulated Duct -8 inch nominal diameter x 25 foot length -Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation --40o F to +250o F temperature range -Wire helix reinforcement with anti-scuff strip -Complete with nylon ring and securing strap on opposite ends -For use in non-hazardous locations only 8" Duct Couplers -Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps -Heavy duty -24 gauge -Galvanized or stainless steel construction -For use in non-hazardous locatio

Anchor Welding Wires -er70s-6 .045x44 (44# spool-i) Set of: 44 ER70S-6-045X44 OUR SKU# ANR4644 MPN: 100-ER70S-6-045X44 Anchor Er70S-6 .023X2 (2# Spool) Anchor Er70S-6 .030X2 (2# Spool) Anchor Er70S-6 .035X2 (2# Spool) This item features: ER70S6 is a mild steel welding wire that contains high levels of manganese and silicon which produces high quality welds when used on dirty, oily, or rusty steel The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance resulting in minimal post-weld grinding S-6 wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength of all the plain carbon steel wires This product requires a shielding gas of CO2 and/or CO2 mix; conforms to AWS 5.18 and CSA 48.4 Tensile Strength: 85000 psi [Max] Material: Mild Steel Style: Dia.:0.0230", Wt.:12"lb, Pkg Spool - Price is for 1 Pound Style: Dia.:0.0230", Wt.:2"lb, Pkg Spool - Price is for 2 Pounds Style: Dia.:0.0230", Wt.:33"lb, Pkg Spool - Price is for 1 Pound

No Description

6914 Open Ball Bearing 70mm x 100mm x 16mm Quality: ABEC 1 6914 Open ABEC 1 Ball Bearing, 6914 bearing is Open, 6914 bearing is Oil preserved, inner diameter is 70mm, outer diameter is 100mm and width is 16mm. * Item: 6914 Ball Bearing * Type: Deep Groove Radial Ball Bearing * Closures: Open * Quality: ABEC 1 * Lubrication: Oil * Cage: Chrome Steel * Material: Chrome Steel * Dimensions: 70mm x 100mm x 16mm/Metric * ID (inner diameter)/Bore: 70mm * OD (outer diameter): 100mm * Width/Height/thickness: 16mm * Size: 70 x 100 x 16 mm * Quantity: One Bearing * Dynamic load rating Cr: 23, 700 N * Static load rating Cor: 21, 100 N * Limiting Speed: * Grease Lubrication: 6, 500 RPM * Oil Lubrication: 7, 700 RPM

6914ZZ Shielded Ball Bearing 70mm x 100mm x 16mm 6914ZZ Shielded Ball Bearing, this bearing is made of Chrome Steel, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.Item: 6914ZZ Ball Bearing Type: Deep groove Ball Bearing Closures: 2 Metal Shields Lubrication: Self Lubricated (Grease)Dimensions: 70mm x 100mm x 16mm/Metric ID (inner diameter)/Bore: 70mm OD (outer diameter): 100mm Width/Height/thickness: 1

Diamant-D Titanium 14" X 60/50mm X 15mm silent core stone blades   This Italian made blade is the highest quality product you will find for cutting granite slabs. It will provide you with long life and fast aggressive cuts. Another top quality product from Diamant-D. It has a split sandwich segment designed to give you the most aggressive cuts on hard granite for a silent core blade. This blade has one of the fastest cutting speeds of any segmented diamond blade on granite. This free-cutting blade is designed for wet cutting on a bridge saw. It will give aggressive smooth cuts when used on granite and other slabs! It can be run with high performance on both low and high powered bridge saws. If you run a bridge saw you owe it to yourself to put this blade to work. It will give you the cheapest cost per cut.Dimensions:Core Diameter13.50" Overall Diameter 14.75" Arbor Hole 60mm (bushed to 50mm) Segment Height 15mm Segment Width .130" Slot Type Narrow