Toys

The Futaba 7C is one of the most affordable yet most functional 2.4GHz computer radio systems on the market today. The 7C is a system that offers much of the 9C's set-up versatility matched to 4-channel ease of use, what more could you want? Like all other Futaba computer systems, it offers Dial n' Key simplicity for programming, and the 2.4GHz FASST system for an unparalleled RF link. Other 7C features include R617FS FASST 7-Ch Receiver, 600mAh 4.8V NiCd Receiver Battery, Four S3152 Digital High Torque Servos, NT8S600B 600mAh 9.6V NiCd Transmitter Battery, Switch Harness w/Charge Cord and a black Futaba neck strap. If you are not totally convinced that this 2.4GHz system is right for you, please take a peek at the features and specs ? that?s all the more you will need to do!

No Description

THE MOST SOPHISTICATED RTF PARK FLYER EVER OFFERED! PolyNylolene" construction with laminate reinforced wing and tail surfaces. 400 Out-Runner Brushless Motor and Electronic Speed Control. PF4000 four channel 72MHz FM with 3 micro servos, and micro receiver: Complete radio system can be transferred to other airplanes. Two included trainer cables - (compatible with Megatech, Hitec and Futaba round and micro) Brushless Electronic Speed Control. Tricycle type with steer-able nose gear. 11.1v 850 MAH Lithium Polymer (3 Cell with balanced charging connector). DC Peak Detection balancing LiPo battery charger (2 and 3 cell capable). Ready To Fly with less then 10 minutes of final assembly

http://site.nitroplanes.com/ExceedRC/69A718-JollyRoger-RTF-24G-Fly-01.jpg

http://site.xheli.com/bluerevo1.jpg

No Description

No Description

http://site.nitroplanes.com/ExceedRC/69A718-RedViper-RTF-24G-Fly-01.jpg

http://site.xheli.com/greenrevo1.jpg

Just look at the Prowler and the phrase "evolution-of-flight" comes to mind. And in so many ways, this statement truly applies. This isn't one of those designs that went from the drawing board, directly into manufacture, as is the case with so many other model airplane designs. From its T-tail design, which puts the horizontal stabilizer up out of the wake of the main wing; to its streamlined conical fuselage, the Prowler is a study in low-drag/high-lift refinement. All of which adds up to smooth performance and optimized flight duration. Set includes: Prowler Airplane, Fully Proportional PF4000 72MHz FM Radio System, (2) NiMH Battery Packs, AC Charger and DC Charger.

http://site.nitroplanes.com/HC-F-18-Blue.jpg

2.4Ghz Exceed G2 Quick Features! Acrobatic 3D 6 Channel Collective Pitch  - rubber, alieron, elevator and throttle, 3D conversion and alterable pitch system Exceed 400 Brushless Motor 3500KV 30A Exceed Brushless Speed Controller 11.1V 1200mAH LiPo Battery+ Quick Wall AC Charge Belt-Driven Tail-One Way Bearing Exceed RC Receiver 2.4Ghz 2.4Ghz 6 Channel Remote Control Transmitter w/ LCD Precise English User Manual 2.4Ghz Exceed-RC G2: Ready to Fly !!! Features: -6-Channel Transmitter -Fiber Glass Rotor Blades -400 Exceed Brushless Motor -30A Brushless Speed Controller -11.1V 1200MAH LiPO Battery The New Improved 2.4Ghz Exceed-RC G2 is ready to fly out of the box within minutes. Everything needed to fly is included and installed such as a battery pack, motor, electronic and a 6 channel 2.4Ghz radio system. All that is needed are 8 "AA" batteries for the transmitter. Plus, each 2.4Ghz Exceed-RC G2 is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The 2.4Ghz Exceed-RC G2 offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos Expect only the best as you experience tight, precise control and quick response as the Exceed-RC G2 will dazzle you with agility and speed. Using the basics of micro electric design to keep components light and durable while distributing heat away from electronic, the Exceed-RC G2 is not only precise, but also efficient. When you combine precision and efficiency and add beauty, you will arrive at the 2.4Ghz Exceed-RC G2: The Ultimate Super-Micro Electric Helicopter. Pre-built Exceed-RC G2 400 size RC Helicopter, zero assembly time, Ready to fly out of the box 6 channel 2.4Ghz multifunctional transmitter with 3D conversion. PIT and PLT adjusting knob Belt Driven Tail Rotor System One-way bearing system. Flameout landing system 2.4Ghz receiver unit (mixer, motor controller, receiver), High Quality External electric gyro English User Manual Main Rotor Diameter: 630 MM Fiber Glass Blade 24.8 inch Tail Rotor Diameter: 145 MM 5.7 inch Overall Length: 610 MM 24 inch Overall Height: 195 MM 7.7 inch All-up Weight: 580g (battery included) 20 ounce Battery: 11.1V 1200MAH LiPo Battery Power: 400 Brushless Motor ESC: 30A Speed Controller Servo: 4 x 9g Pitch Control: rubber, alieron, elevator and throttle, 3D conversion and alterable pitch system Radio System: Transmitter: 2.4Ghz Charger: Balance Charger w/ Wall Unit (2.4Ghz Exceed G2 Edition) Features 1 . The ExceedRC Transmitter adopts 2.4Ghz spectrum technology and features automatic code pairing and ID memory. 2 . LCD display of the ExceedRC Transmitter is simple to understand and easy to set. 3 . The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics. 4 . The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right. 5 . The ExceedRC Transmitter supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights. 6 . Capable of wireless data copy and transfer between two transmitters. 7 . Four Adjustable hot keys facilitate easy entry into the

2.4Ghz Exceed G2 Quick Features! Acrobatic 3D 6 Channel Collective Pitch  - rubber, alieron, elevator and throttle, 3D conversion and alterable pitch system Exceed 400 Brushless Motor 3500KV 30A Exceed Brushless Speed Controller 11.1V 1200mAH LiPo Battery+ Quick Wall AC Charge Belt-Driven Tail-One Way Bearing Exceed RC Receiver 2.4Ghz 2.4Ghz 6 Channel Remote Control Transmitter w/ LCD Precise English User Manual 2.4Ghz Exceed-RC G2: Ready to Fly !!! Features: -6-Channel Transmitter -Fiber Glass Rotor Blades -400 Exceed Brushless Motor -30A Brushless Speed Controller -11.1V 1200MAH LiPO Battery The New Improved 2.4Ghz Exceed-RC G2 is ready to fly out of the box within minutes. Everything needed to fly is included and installed such as a battery pack, motor, electronic and a 6 channel 2.4Ghz radio system. All that is needed are 8 "AA" batteries for the transmitter. Plus, each 2.4Ghz Exceed-RC G2 is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The 2.4Ghz Exceed-RC G2 offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos Expect only the best as you experience tight, precise control and quick response as the Exceed-RC G2 will dazzle you with agility and speed. Using the basics of micro electric design to keep components light and durable while distributing heat away from electronic, the Exceed-RC G2 is not only precise, but also efficient. When you combine precision and efficiency and add beauty, you will arrive at the 2.4Ghz Exceed-RC G2: The Ultimate Super-Micro Electric Helicopter. Pre-built Exceed-RC G2 400 size RC Helicopter, zero assembly time, Ready to fly out of the box 6 channel 2.4Ghz multifunctional transmitter with 3D conversion. PIT and PLT adjusting knob Belt Driven Tail Rotor System One-way bearing system. Flameout landing system 2.4Ghz receiver unit (mixer, motor controller, receiver), High Quality External electric gyro English User Manual Main Rotor Diameter: 630 MM Fiber Glass Blade 24.8 inch Tail Rotor Diameter: 145 MM 5.7 inch Overall Length: 610 MM 24 inch Overall Height: 195 MM 7.7 inch All-up Weight: 580g (battery included) 20 ounce Battery: 11.1V 1200MAH LiPo Battery Power: 400 Brushless Motor ESC: 30A Speed Controller Servo: 4 x 9g Pitch Control: rubber, alieron, elevator and throttle, 3D conversion and alterable pitch system Radio System: Transmitter: 2.4Ghz Charger: Balance Charger w/ Wall Unit (2.4Ghz Exceed G2 Edition) Features 1 . The ExceedRC Transmitter adopts 2.4Ghz spectrum technology and features automatic code pairing and ID memory. 2 . LCD display of the ExceedRC Transmitter is simple to understand and easy to set. 3 . The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics. 4 . The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right. 5 . The ExceedRC Transmitter supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights. 6 . Capable of wireless data copy and transfer between two transmitters. 7 . Four Adjustable hot keys facilitate easy entry into the

No Description

The E-Copter DZ 8307 is a 4 channel 2.4 ghz radio controlled RC helicopter with co-axial, twin rotor blades system. The 2.4 ghz radio uses less current to operate than standard frequency systems, which results in longer flight time and longer life of your transmitter and receiver batteries. The 2.4 ghz radio provides a more stable and responsive flight. The 4 channels allow four way precision control, this helicopter is perfect for indoor and outdoor use. Requires 8 AA Batteries.

http://site.nitroplanes.com/arttech/AT-22093-Diamond2500-RTF-24G-Fly-01.jpg

http://site.nitroplanes.com/ExceedRC/69A718-RedViper-RTF-24G-Fly-01.jpg

Brand new Robotalk 2 dual channel envelope filter . with original box and warranty. this thing is really cool! Useful info from Lauren Victoria: -We only use eBay messages for contact, so if you email us we wont reply! -International buyers please note: Import duties, taxes, and charges are NOT included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bid

Tonka Ricochet Radio-Control Vehicle, Gray:2-sided, 4x4 stunt vehicle27 MHzComes with wireless controllerRequires one 9.

http://site.arttechusa.com/mig-15-red-1.jpg

http://site.nitroplanes.com/ExceedRC/69A718-RedViper-RTF-24G-Fly-01.jpg

The SD-10G is an all-out high performance radio designed to give every modeler sport or competition pilot a radio that is easy to use powerful flexible for any application and yet very affordable. Airtronics has found success with this amazing radio. The SD-10G in the hands of Mike Fox has won an AMA Nationals Title! 2M Sailplane 2009!. 10-Channel Computer Radio with Advanced Programming for Competition Helicopters Sailplanes and Powered Aircraft. Compatible with All Airtronics 2.4GHz FHSS Aircraft Receivers. System Includes 6-cell 1500mAh NiMH TX Battery and Charger. Transmitter Is Compatible with 2-Cell Lithium Batteries. Full-Range 92104 10-Ch 2.4GHz Receiver Included. Ball Race Supported Gimbals with Adjustable Springs and Adjustable Throttle Ratchet. Unique Direct Model Select Allows Selection of 3 Favorite Models Without Entering the Computer. Stick Mode 1 2 3 and 4 Are Available and Easily Selected By User (Default Is Mode 2). Telescoping Transmitter Antenna for Increased Range When Needed.

NIB Hitec X2 2 Port Charger Charge 200W on EACH channel Part No: 44164 IN STOCK NOW!!! Recharging your high amperage batteries has never been easier or more affordable than with our X2 Ultima two-channel charger. Featuring dual 200-watt power ports, this efficient charger will charge two Lithium, NiCd, NiMH or Lead Acid packs at once. It is capable of delivering 10 amps of charging current and can discharge your packs at up to 5 amps for efficient battery maintenance.Perfect for all electric ai

(1) TM-8 8-Channel 2.4GHz FASST TX RF Module; for 7U*, 8U, 9C, and 9Z Systems (1) Instruction Manual (2) Bonus S3004 Standard Ball Bearing Servos wt Hardware, Manufacturer: Futaba

The enthusiasts have spoken, and the word is the X2 Ultima 2-channel charger is the last one you will ever need! Hitec has made recharging your high amperage batteries easier and more affordable the all-new X2 Ultima two-channel charger. Featuring dual 200-watt power ports, this efficient charger will charge two Lithium, NiCd, NiMH or Lead Acid packs at one time, no joke! It is capable of delivering 10 amps of charging current and can discharge your packs at up to 5 amps for efficient battery maintenance. Perfect for all electric aircraft and surface hobbyists, the X2 Ultima will power your larger batteries in a short period of time and at a price that can?t be beat. High charging power, low cost. Get More Get Hitec!

http://site.nitroplanes.com/ExceedRC/69A718-JollyRoger-RTF-24G-Fly-01.jpg

Spektrum DX7s 7 Channel w/AR8000 Receiver Mode 2 Spektrum believes you should expect more from a 7-channel transmitter and the DX7s is proof. Besides advanced DSM2/DSMX technology and an impressive list of programming features, it boasts the finest ergonomics in its class. Its balanced weight, silky smooth quad-bearing gimbals and rubber grips provide a sense of comfort and precision that is second to none.

Proline PRO607700 Aluminum 12mm Rear Clamping Hex Wheel Adapter Set B4.1 (Blue) (2)Features Made from 7075 Aluminum Blue anodized finish with a white Laser-etched P-L Logo Clamping hex design for secure fit Overview This is a pair of Pro-Line Aluminum 12mm Rear Clamping Hex Adapters for the B4.1. If you just converted your B4.1 to 12mm hexes, then Pro-Lines clamping hexes are a must have for all serious racers.