Tools and Accessories

Heavy-duty cast iron cross slide vise has replaceable serrated 4in. jaws that open to 3 1/4in. Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities. Set screws hold positioning tightly for drilling. Longitudinal movement of 6in. with cross travel of 4in. Vise is secured to drill press by 3 slots on 2 sides and 1 slot on one end.

Perfect for arts and crafts, jewelry and model making, electronics, and other small projects! Your work is held gently, but securely, and can be positioned exactly where you want it. Model Number: 201 Specifications: The easy-to-use single knob controls head movement through 3-planes: 210 Tilt, 360 Turn & 360 Rotation Fine/coarse adjusting knob controls jaw pressure for delicate work Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic. Continuous heat tolerance to 350F (177C), intermittent heat up to 450F (204C) Jaws are 2&quot (50.8mm) tall, 1&quot (25.4mm) wide, and open to 2.875&quot (73mm) Neoprene jaw pads are available for holding extremely delicate items Base features 4.3125&quot (109.5mm) bolt circle countersunk for three 1/4&quot (6.3mm) flat-head screws (not included); compatible with all PanaVise Base Mounts Height: 6.75&quot (173mm), Weight: 1.2 lbs. (0.6kg)

OETIKER 1-Ear Clamps - Stainless Steel

FS-Rapid Clamp - 489790. Fixed Jaw. Clamping Jaw

Bessey XC2 1 Plastic Spring ClampBessey has grown to be the largest clamp manufacturer in the world, distributing some 1300 different clamping tools in 90 countries worldwide. Bessey cutting technologies represent a tradition in the manufacture of tin snips going back more than 70 years.

8" C-Clamp Heavy-duty c-clamp with large swivel pad and handle. Best suited for maintenance and repair work. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Drill Bit Set, 29 Piece, Cobalt, 1/16" to 1/2", by 64ths, Jobber Length, in Metal Index IRWIN offers a complete line of Metal Twist Drill Bits, including Black Oxide, Turbo Point, Titanium Nitride, and Cobalt Drill Bits.. Ideal for drilling into hardened steel, alloys, titanium and stainless steel. Cobalt steel extends cutting edge life and maintains cutting life after resharpening. Extra hard drill for greater wear. 135? split point tip starts on contact, cuts with less force. Reduced shank above 3/8" allows the use of larger drill bits in a 3/8" chuck. Rubber overmolded case protects kit if dropped. Tap & Drill selection chart for convenient reference.. Automatic indexing for easy bit access and identification.

No Description

Ridgid 23337 Specifications: •  Type: 45? SAE Double Flares •  Flare Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" •  Double Lap Flare Adapter Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" Ridgid 23337 Features: •  Model 345 is a precision designed tool for producing 45? flares in soft copper, brass, aluminum and mild steel (JIC and Bundy) tubing. •  A hardened, smooth cone provides fast, 45? flares either single or double lap. •  A single clamp screw provides for easy clamping and removal of tubing.

No Description

The Amprobe CT238A current clamp measures AC or DC current to 30 amp without touching or interrupting the circuit. The Hall effect clamp has two jaws that fit around a 0.75" (19 mm) conductor. It converts a high-current signal to a low-level millivolt signal so it can be read by a testing device. The zero adjust function compensates for changes in output voltage due to environmental conditions. The clamp attaches to a compatible testing device, such as a digital multimeter, with a 59-inch, 1.5-meter lead. A finger guard on the body of the meter helps protect fingers from shock. The clamp operates on one 9V battery (included). It weighs 0.64 pounds (290 g) and measures 2.2 by 8.3 by 1.2 inches (55 x 210 x 30 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back).

Color: Brushed Nickel Width: 2-3/8" (60 mm) O.D. Depth: 3/4 in (19 mm) O.D. Height: 1-1/8 in (28 mm) Depth: 1-3/16" (30.2 mm) Size: 2-3/8" (60 mm) Wide x 1-1/8" (28 mm) High Made of Solid Brass Includes Clear Gaskets and Mounting Screws Glass Thickness Range: 5/16" to 3/8" (8 to 10 mm) The CRL No-Drill Fixed Panel Glass Clamp is made of solid brass, and is available in numerous stock finishes. This clamp provides an alternative to clamps requiring drilled holes or notches in the glass. Two nylon tipped set screws are tightened to clamp the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must be used for reinforcement along all glass edges where clamps are used. Minimum order is one each. Important NotesDo not hinge a door off a fixed panel using these Clamps. Clamps must be used on minimum of three sides of fixed panel (top, bottom, and at least 1 side). Silicone must be used for reinforcement along the entire edge of the glass where clamps are used.

This heavy-duty vise is unequaled in quality. "Quick-release" action lets you bypass the screw for fast opening and closing. Solid steel dogs in the front jaws, when used in conjunction with a bench stop, allows oversize work to be held securely on the bench top. Machined, toed-in jaws provide a solid grip, while northern hardwood handles provide balance and comfort. The front and back jaws are drilled and tapped for countersunk holes to allow for optional wood facing. Vise easily fits any bench up to 3" thick.

Put more power in the palm of your hand with the versatile XP bar clamp/spreader. You get the convenience of one-handed clamping with the power of 550 lbs. of pressure, making glue-up...

OHZ4444: Features: -Hardened teeth provide tremendous bite.-Easy spin adjusting nut is heat treated for durability.-Material: Cast Iron.-Price is for 1 Each.

Clamp On Ammeter, Ac Response Trms, 600 Max. Ac Amps, 600 Max. Dc Amps, 600 Max. Ac Volts, 600 Max. Dc Volts, 6000 Max. Ohms, Jaw Capacity 1-1/3 In., Battery Type Aa, Safety Rating Cat Iv 600v, Cat Iii 1000v, Calibration Certificate Nist, Audible Continuity Yesfrequency Counter 5 To 500 Hzpeak Hold Yesdisplay Backlit Lcdcounts 6000, Calibration Frequency 10 To 500 Hz, Auto Ranging Yes, Data Hold Yesincludes Soft Carrying Case, Test Leads, (2) Batteries, Instructions

100 ft. LEADS PACKAGE FOR STICK WELDING. INCLUDES 100' OF 1/0 CABLE, HIGH QUALITY, FLEXIBLE CABLE, 2 LUGS TO ATTACH TO WELDER AND A 300 AMP GROUND CLAMP AND ELECTRODE HOLDER FROM TWECO. (2) 2-AF LUGS AND 2 TWECO 2-MPC-1 TWIST LOCK CABLE CONNECTORS, Tweco A-732 300 amp Electrode Holder and Tweco GC-300 Ground clamp.

CRL Brass 90 Degree Sleeve Over Glass Clamp. CRL Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.

Powermatic Sturdy cast iron construction with precision-machined column and table Quick position table mounted swiveling vise clamp accommodates angled work pieces Feed lever features size positions allowing for quick adjustments Table and fence tilt from 0 to 35° for angled mortises Gas cylinder controlled rack and pinion system for smooth head raising and lowering Hinged chuck door allows easy access for quick bit changes Quick adjust depth stop for uniform mortise depths Provided 5/8, 3/4 and 1-1/8 bushings allow multiple chisel shank sizes Handwheels control smooth linear and cross table motions Adjustable work stop for repeat cuts

Jorgensen, 6", Heavy Duty, Professional Grade, Bench Vise, 6" Jaw Width, 6" Maximum Opening Capacity, Replaceable Steel Jaws, Permanent Pipe Jaws, 180 Degree Swivel Base With Steel Lock Down Bolt, Large Polished Anvil.

Quick Grip Pipe ClampInnovative clutch system eliminates the need for threaded pipe. Larger feet offer more stability. Greater clearance between handle and work top. Larger clutch plates allow for easier release. Opening Size: 0 in [Min], 1 7/8 in [Max]; Throat Depth: 3/4 in; Weight: 4 3/4 lb.

Heavy-duty malleable steel frame. Chrome plated steel screw with swivel pad. Sliding t-bar handle. Durable baked enamel finish.

No Description

Clamp-on Vise 226303 Specifications: Throat Depth: 3" Jaw Width: 3" Jaw Capacity: 2" Quick-Grip Clamp-on Vise 226303 Features: •  Heavy-duty vises designed for the professional woodworker

C-clamp, Extra Heavy Duty, Size 12 In, Throat Depth 3 1/2 In, Min Proof Test 40, 000 Lb, Load Capacity 40, 000 Lb, Clamp Type Drop Forged, Spindles Steel, Pad Smooth, Black, Anvil Smooth, Hot Forged Steel Frames, Swivel Pad

Data Hold plus fast Peak Hold of current surges during motor startup. 40, 000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges. Measures motor capacitors to 40, 000 F. 1.4" (36mm) jaw opening for conductors up to 500MCM.

OHZ1755: Features: -Reverse spiral flutes are designed to bite down to provide maximum gripping power.-High carbon steel ensures longer life and greater durability.-Universal lobular design fits all types of fasteners.-3/8 square drive for use with hand ratchets, impact wrenches, and air ratchets, hexagonal flats for use with flat wrench, pliers, adjustable wrench, sockets or Vise-Grip locking pliers.-Carded. Includes: -Includes 3/8 , 7/16 , 1/2 , 9/16 and 5/8 .

Color: Satin Stainless Height: 1-1/16 (27 mm) Width: 1-5/32 (29.5 mm) Glass Thickness: 1/4 (6 mm) Base Metal: Stainless Steel For 1/4 (6 mm) Thick Glass For Mounting to Flat Surfaces No Hole Drilling; Pressure Fit This CRL Mini Z-Series Glass Clamp is ideal for small displays and glass barriers. There is no glass drilling required, as the glass is held firmly with a pressure fit. These clamps are designed for 1/4 inch (6 millimeter) thick glass and have a flat base for mounting on to flat surfaces.