Sport and Outdoor

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. To maximize club-head speed, PowerBilt is using a proprietary Apollo steel shaft which weighs only 85 grams – much lighter than a conventional steel shaft and slightly more than graphite. The shafts als

The TaylorMade R11 Irons feature the following: Inverted Cone Technology promotes faster ball speed and distance on off center hits. A weight port is permanently placed in the center of the back of an iron head during production guarantee that each iron has the same swing weight The CG location is optimally positioned in the center of the face between the toe and heel Super thin face thickness promotes faster ball speed and distance in the R11 long and middle irons. Multi Functional Sole is beveled at the back to make it perform from a variety of lies. Low and deep CG makes it easy to launch the ball on a penetrating flight.

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. In side-by-side testing against industry-leading irons, the Air Force One – Air Foil consistently hit thee ball 10 yards farther with long-iron shots. The sole width transitions throughout the set so ea

The TaylorMade R11 Irons feature the following: Inverted Cone Technology promotes faster ball speed and distance on off center hits. A weight port is permanently placed in the center of the back of an iron head during production guarantee that each iron has the same swing weight The CG location is optimally positioned in the center of the face between the toe and heel Super thin face thickness promotes faster ball speed and distance in the R11 long and middle irons. Multi Functional Sole is beveled at the back to make it perform from a variety of lies. Low and deep CG makes it easy to launch the ball on a penetrating flight.

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. THIS AUCTION IS FOR A 3-PW SET OF KBS TOUR C TAPER REGULAR FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE RED KBS TOUR C TAPER MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR C TAPER REGULAR IS 110 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DISCRETE LENGTHS. DESIGNED FOR 80 MPH 5 IRON CLUB HEAD SPEED. Inspired from Tour player feedback, the KBS C-Taper is designed to complement the KBS Tour shafts exceptional shot control with performance targeting players with a fast swing tempo. Designed to impart a low piercing trajectory and less ball spin, the C-Taper borrows technology from the KBS Tour optimized for an all-new player demographic.

The Ben Hogan Apex Edge Pro Iron Set Golf Club has a solid construction and is extremely well designed. This is a forged iron club with impressive accuracy. The Ben Hogan Apex Edge Pro Iron Set Golf Club is tremendously playable and forgiving. These golf clubs, though cavity-backed irons, some of their features makes them similar to blades. This club has a thin top line with narrower sole and reduced offset. They are meant for consistent ball strikers. The stiff apex #4 shaft allows high swing speed with full control of shots. The Ben Hogan Apex Edge Pro Iron Set Golf Club yields great distance and allows shaping shots in a desired manner. If there is a need to adjust the angles of your golf clubs, this forged irons club is just what you need.

AIR FORCE ONE Combo N7 NITROGEN CHARGED IRONS 4-PW, SW PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Forcce One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvvinge, president of PowerBilt. "There is a way to imp rove distance in irons, and we?ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we?ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. To maximize club-head speed, PowerBilt is using a proprietary Apollo steel shaft which weighs only 85 grams ? much lighter than a conventional steel shaft and slightly more than graphite. The shafts also have variable kick points. In the long irons thee kick point is low to promote higher trajectory. A mid kick point is used in the middle irons to promote both distance and accuracy, while the short irons utilize a high kick point for dead-on accuracy. In side-by-side testing against industry-leading irons, the Air Force One ? Air Foil consistently hit thee ball 10 yards farther with long-iron shots. "If I hadn't seen it with my own eyes, I wouldn?t have believed it, " states Kvinge. The lofts are standard for modern-day irons: #4-21?; #7-311?; PW-45?. The sole width transitions throughout the set so each club produces desired playability and easy launch angles. T he top line gets thinner ass the set moves toward thee short irons. And the offset is progressive. & Features Hollow 431 Stainless Steel 2 Piece Hollow Core Construction Nitrogen Charged Edge to Edge Sweet Spot Weightless Face Support Nitrogen Pressurized Club Head Progressive Offset & Features Cavity Back 431 Stainless Steel Deep Undercut Cavity Oversized Face Progressive Offset Optimum Trajectory & Specs CLUB LOFT LIE LENGTH DESIGN 4 21* 60.5 deg 39.00 in Hollow 5 24* 61.0 deg 38.50 in Hollow 6 27* 61.5 deg 38.00 in Hollow 7 31* 62.0 deg 37.50 in Hollow 8 35* 62.5 deg 37.00 in Cavity 9 40* 63.0 deg 36.50 in Cavity PW 45*

The Taylor Made R11 irons are cast from stainless steel and feature a precision weighting port in the cavity that produces precise swingweights and optimally located centers of gravity throughout the set. The faces in the long and middle irons are constructed using ultra-thin face thickness to promote faster ball speeds and more distance. They also feature progressive topline thickness, as well as progressive sole thickness that increase the the MOI for more forgiveness on off-center hits. Its advanced groove design produces increased spin for improved control, while Taylor Made's Inverted Cone Technology promotes faster ball speeds from a larger portion of the clubface.

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. In side-by-side testing against industry-leading irons, the Air Force One – Air Foil consistently hit thee ball 10 yards farther with long-iron shots. The sole width transitions throughout the set so ea

The TaylorMade R11 Irons feature the following: Inverted Cone Technology promotes faster ball speed and distance on off center hits. A weight port is permanently placed in the center of the back of an iron head during production guarantee that each iron has the same swing weight The CG location is optimally positioned in the center of the face between the toe and heel Super thin face thickness promotes faster ball speed and distance in the R11 long and middle irons. Multi Functional Sole is beveled at the back to make it perform from a variety of lies. Low and deep CG makes it easy to launch the ball on a penetrating flight.

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. To maximize club-head speed, PowerBilt is using a proprietary Apollo steel shaft which weighs only 85 grams – much lighter than a conventional steel shaft and slightly more than graphite. The shafts als

The TaylorMade R11 Irons feature the following: Inverted Cone Technology promotes faster ball speed and distance on off center hits. A weight port is permanently placed in the center of the back of an iron head during production guarantee that each iron has the same swing weight The CG location is optimally positioned in the center of the face between the toe and heel Super thin face thickness promotes faster ball speed and distance in the R11 long and middle irons. Multi Functional Sole is beveled at the back to make it perform from a variety of lies. Low and deep CG makes it easy to launch the ball on a penetrating flight.

The Pro Swing-a-Weight is used just prior to starting every round of golf. The sealed bag, made of of Velcro material with locking tab, is weighted and easily wraps securely around neck of Driver or any iron club. Takes the stiffness out of your arms and muscles. Develops correct balance, coordination and timing in your practice swings. Very importantly, it allows the golfer to synchornize his swing to the flex of the shaft. Most all golfers tend to start over swinging after several holes into the round. Now he can re-attach the Pro Swing-aWeight to the club being used and slow his swing back down to get in sync again with the flex of the shaft. When a golfer's swing is in sync with the shaft flex, then the shaft will unload just at the point of impact with the ball and produce the longest and most accurated drives, "A must item for every golfer wanting to maximize distance and accuracy during the entire round".

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. In side-by-side testing against industry-leading irons, the Air Force One – Air Foil consistently hit thee ball 10 yards farther with long-iron shots. The sole width transitions throughout the set so ea

The longer irons have an increased offset for hitting longer shots, and the higher irons have decreased offset for greater precision. This style is one of the easiest iron head design to play with that the industry has to offer. In addition, these irons are easy to look at providing a thicker top-line and a larger head size resulting in increased confidence when addressing the ball. WEIGHTING: This iron head provides a deeper center of gravity and wider sole resulting in a longer ball flight and very forgiving performance even on errant shots. This style may be the easiest iron head design to play with that the industry has to offer. OFFSET: Each iron in this set has a wonderful degree of offset which is one of the main factors which has made this Slingshot series of irons so popular. FEEL: This iron has an amazingly solid feel at impact even on miss-hits.

PowerBilt Air Force One Hollow N7 Nitrogen Charged Irons PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Forcce One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvvinge, president of PowerBilt. "There is a way to imp rove distance in irons, and we?ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we?ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. To maximize club-head speed, PowerBilt is using a proprietary Apollo steel shaft which weighs only 85 grams ? much lighter than a conventional steel shaft and slightly more than graphite. The shafts also have variable kick points. In the long irons thee kick point is low to promote higher trajectory. A mid kick point is used in the middle irons to promote both distance and accuracy, while the short irons utilize a high kick point for dead-on accuracy. In side-by-side testing against industry-leading irons, the Air Force One ? Air Foil consistently hit thee ball 10 yards farther with long-iron shots. "If I hadn't seen it with my own eyes, I wouldn?t have believed it, " states Kvinge. The lofts are standard for modern-day irons: #4-21?; #7-311?; PW-45?. The sole width transitions throughout the set so each club produces desired playability and easy launch angles. T he top line gets thinner ass the set moves toward thee short irons. And the offset is progressive. & Features 431 Stainless Steel 2 Piece Hollow Core Construction Nitrogen Charged Edge to Edge Sweet Spot Weightless Face Support Nitrogen Pressurized Club Head Progressive Offset & Specs CLUB LOFT LIE LENGTH DESIGN 4 21* 60.5 deg 39.00 in Hollow 5 24* 61.0 deg 38.50 in Hollow 6 27* 61.5 deg 38.00 in Hollow 7 31* 62.0 deg 37.50 in Hollow 8 35* 62.5 deg 37.00 in Hollow 9 40* 63.0 deg 36.50 in Hollow PW 45* 63.5 deg 36.00 in Hollow SW 55* 64.5 deg 35.75 in Cavity Shaft VPK LIGHT WEIGHT STEEL SHAFTS: Ultra Lightweight 85g Steel Shaft Variable Kick Point Flex System Ultimate Control & Trajectory LIGHT WEIGHT GRA

PowerBilt is turning doubters into believers. Skeptics scoffed last year when PowerBilt introduced the Air Force One: drivers, fairway woods and hybrids with club heads filled with nitrogen gas. They thought it was just another golf gimmick, until they tried it. Now, PowerBilt is introducing nitrogen-charged irons. And they are "ballistic" says Ross Kvinge, president of PowerBilt. "There is a way to improve distance in irons, and we’ve figured it out, " adds Kvinge. "By filling the iron head with nitrogen gas , we’ve been able to thin the face and create a much bigger sweet spot. The result is longer shots with more consistent spin rates no matter where you hit the ball on the face. So you not only get more distance, you get better accuracy, too." Kvinge points out that the technology goes beyond nitrogen. To maximize club-head speed, PowerBilt is using a proprietary Apollo steel shaft which weighs only 85 grams – much lighter than a conventional steel shaft and slightly more than graphite. The shafts als

TaylorMade R11 Iron Set 4-PW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 longand middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight.

No Description

NEW OVERSIZE MENS IRON SET REGULAR RH OS GOLF CLUBS ~ULTIMATE FORGIVENESS!~ ~REGULAR FLEX~ HRG ACTION IRON SET! GREAT NEW IRON SET FOR THE AVID GOLFER! 10 (BRAND NEW) IRON SET MODEL: FULLY ASSEMBLED MEN'S STANDARD LENGTH HRG ACTION IRON SET, INCLUDING 3-PW DESCRIPTION: TURBO POWER HRG ACTION WIDE IRON SET, 3-PW RIGHT/LEFT HANDED: RIGHT-HANDED GRIP: PAR VELVET GRIPS GRIP SIZE: STANDARD SHAFT TYPE: PRECISION STEEL SHAFT SHAFT FLEX: REGULAR FLEX LENGTH: MENS STANDARD, #3 IRON= 39 INCHES, IDEAL FOR HEIGHT 5 FEET TO 6FT 2 INCHES INVENTORY #: HRG ACTION IRON SET The Club Head This weighting also allows for higher more piercing trajectories and control like you wouldn't believe. The club head is constructed from two pieces resulting in a hollow core that moves significant weight to the back and bottom of the club. Designed for the new and improving golfer, the revolutionary weight distribution technology results in more forgiveness and distance on every hit. The HRG Action is a great iron for all playing levels! SKI

TaylorMade R11 Individual Iron with Graphite Shaft Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 65, Motore F1 55, Motore F1 75

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. THIS AUCTION IS FOR A 3-PW SET OF KBS TOUR C TAPER STIFF+ (HALF WAY BETWEEN STIFF AND X-STIFF) FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE 8 RED KBS TOUR C TAPER MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR C TAPER S+ IS 125 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DISCRETE LENGTHS. DESIGNED FOR 95 MPH 5 IRON CLUB HEAD SPEED. Inspired from Tour player feedback, the KBS C-Taper is designed to complement the KBS Tour shafts exceptional shot control with performance targeting players with a fast swing tempo. Designed to impart a low piercing trajectory and less ball spin, the C-Taper borrows technology from the KBS Tour optimized for an all-new player demographic.

TaylorMade R11 Individual Iron with Graphite Shaft Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 longand middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight.

With the technology of a wood and iron formatting together, T11 Tour Model head provide a higher launch angle and softer landing shot. The club head's low profile design adds to the lunch angle furthermore. It is a must have club for golfers who have trouble to get the ball into the air.The listing is for a single piece of T11 Tour Model hybrid iron head, you can buy any number (available in 2-LW; RH LH) you want.

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. GET YOUR SET TODAY! THIS AUCTION IS FOR A 4-PW SET OF KBS TOUR STIFF+ (HALF WAY BETWEEN STIFF AND X-STIFF) FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE 8 RED KBS TOUR MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR IS 125 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DESIGNED FOR 95 MPH 5 IRON CLUB HEAD SPEED.

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. THIS AUCTION IS FOR A 4-PW SET OF KBS TOUR C TAPER REGULAR FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE RED KBS TOUR C TAPER MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR C TAPER REGULAR IS 110 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DISCRETE LENGTHS. DESIGNED FOR 80 MPH 5 IRON CLUB HEAD SPEED. Inspired from Tour player feedback, the KBS C-Taper is designed to complement the KBS Tour shafts exceptional shot control with performance targeting players with a fast swing tempo. Designed to impart a low piercing trajectory and less ball spin, the C-Taper borrows technology from the KBS Tour optimized for an all-new player demographic.

Adams Golf a7OS Individual Wedge with Steel Shaft Round out your Adams a7OS set with these very easy-to-hit individual wedges. The individual clubs are both forgiving and versatile with a low and deep CG, quad-cavity perimeter weighting for playability and an "H-back" channel design for enhanced feel.

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. GET YOUR SET TODAY! THIS AUCTION IS FOR A 3-PW SET OF KBS TOUR STIFF+ (HALF WAY BETWEEN STIFF AND X-STIFF) FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE 8 RED KBS TOUR MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR IS 125 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DESIGNED FOR 95 MPH 5 IRON CLUB HEAD SPEED.

TaylorMade R11 Iron Set - 5-PW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90

KBS SHAFTS ARE USED BY MORE AND MORE TOURING PROS EVERY DAY. THE PROS RECOGNIZE THE INCREDIBLY TIGHT TOLERANCES AND HIGH QUALITY OF THESE SHAFTS. GET YOUR SET TODAY! THIS AUCTION IS FOR A 4-PW SET OF KBS TOUR REGULAR+(HALF WAY BETWEEN REG AND STIFF) FLEX IRON SHAFTS. THESE SHAFTS ARE BRAND NEW STILL IN THE BAG. THEY ARE .355 TAPER TIP. ALSO INCLUDED ARE 7 RED KBS TOUR MATCHING SHAFT LABELS. EACH SHAFT IS LABELED WITH THE CORRESPONDING CLUB NUMBER. THE KBS TOUR IS 115 GRAMS, .600 BUTT DIAMETER, CONSTANT WEIGHT DESIGNED FOR 85 MPH 5 IRON CLUB HEAD SPEED.