Security Systems and Surveillance

No Description

The Optex RCTD-20U Wireless 2000 Annunciator is a wireless detection and alarm system that can transmit signals up to 2, 000 feet.Use the Wireless 2000 Annunciator as a perimeter alert for your home or shop, a driveway alarm to detect approaching vehicles, a wireless doorbell, a warehouse delivery notification system, and many other applications. The Wireless 2000 will alert you that a zone has been breached with one of three tones. The alert tones have five different sensitivity levels and can be set to sound up to 80 dB. If you choose to incorporate more transmitters, the receiver can also identify which zones have been breached by certain tones. Up to 12 transmitters can be incorporated.The Wireless 2000 comes equipped with TWO detection patterns that can adjust easily for perfect aiming: a long range of 50 feet and a fan pattern range of 17 feetOne of the more useful features of the Wireless 2000 is that you can trigger other devices, such as door strikes, lights, sirens, cameras, and more.

SVAT's GIGAXTREME 301 system can be used to monitor and record video and audio in any indoor or outdoor space at any time of the day. This wireless plug and play system allows for easy set up in a matter of minutes .

No Description

Napco ISVWLOCAM ADDITIONAL OUTDOOR IR WIRELESS CAMERA, INCLUDES: (1) ISVWLOCAM OUTDOOR IP COLOR 1/5" CMOS WIRELESS CAMERA, 802.11B/N, VGA RES (640 X 480) AT UP TO 25 FPS, H.264 COMPRESSION, IP65 WATERPROOF RATING, 8 LED IR NIGHTVISION, BUILT-IN PIR MOTION SENSOR FOR VIDEO EVENT TRIGGERING, POWER ADAPTOR W/ 15FT CABLE. INCLUDES 12 MONTHS OF ISEEVIDEO NETWORK SERVICE, INCLUDING NAPCOIP.COM DDNS SERVICE

No Description

No Description

No Description

No Description

Napco F-64KIT2 Includes: F-64 control panel, F-64TP Wireless-ready Touchpad with blue backlit display, F-TAB Dead Bolt sensor, F-BOLT-TRANS wireless transmitter (with battery) with bolt sensor and door contact inputs, PIR1680PT motion sensor, TRF12 XFormer, (3) F-IFOB Digital Keys

No Description

Napco ISVWLCAM ADDITIONAL FIXED IP WIRELESS CAMERA, INCLUDES: (1) ISVWLCAM INDOOR FIXED IP COLOR 1/4" CMOS WIRELESS CAMERA, 802.11G, VGA RES (640 X 480) AT UP TO 25 FPS, MPEG4 COMPRESSION, WITH 2 WAY AUDIO SUPPORT, LOW LUX OPERATION, POWER ADAPTOR W/ 15FT CABLE. INCLUDES 12 MONTHS OF ISEEVIDEO NETWORK SERVICE, INCLUDING NAPCOIP.COM DDNS SERVICE

Napco ISVWLCAMPT ADDITIONAL PAN/TILT IP CAMERA, INCLUDES: (1) ISVWLCAMPT INDOOR PAN/TILT IP COLOR 1/4" CMOS WIRELESS CAMERA, 802.11G, VGA RES (640 X 480) AT UP TO 25 FPS MPEG4 COMPRESSION, WITH 2 WAY AUDIO SUPPORT, LOW LUX OPERATION, POWER ADAPTOR W/ 15FT CABLE. INCLUDES 12 MONTHS OF ISEEVIDEO NETWORK SERVICE, INCLUDING NAPCOIP.COM DDNS SERVICE

Napco SL-1FD-T FULLY SUPERVISED, FULL CHANNEL, TWO-WAY GPRS WIRELESS RADIO, COMPATIBLE WITH VIRTUALLY ANY ALARM CONTROL PANEL.

Product Features: Technology: Wireless

Evolve LOM-15 Wall Mount 15A Outlet LOM-15 duplex receptacle The LOM-15 Duplex Receptacle is a component of the Evolve lighting control system. Wire the Duplex Receptacle in place of a standard receptacle according to the diagram above. Inclusion of this Receptacle allows remote ON/OFF control of loads connected to the controlled outlet. The other outlet remains powered all the time. This LOM-15 Duplex Receptacle is designed to work with other Evolve enabled devices. Evolve nodes of other types can be included in the system and will also act as repeaters. As part of a Evolve network, the LOM-15 will also act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range of the wireless controller.

Evolve LSM-15 Wall Mount 15A Switch LSM-15 Wall Mounted Switch The LSM-15 Wall Mounted 3-Way Switch is a component of the Evolve lighting control system. Wire the Wall Mounted Switch in place of the standard wall switch according to the diagram above. Inclusion of this Switch allows remote ON/OFF control of loads connected. This Wall Mounted Switch is designed to work with other Evolve enabled devices. Evolve nodes of other types can be added to the system and will also act as repeaters. As part of a Evolve network, the LSM-15 will also act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range.

Evolve LPM-15 15A Appliance Module LPM-15 Plug-In Appliance Module The LPM-15 plug-in Appliance Module is a component of the Evolve lighting control system. Plug the Appliance Module into a wall outlet and plug a load into the Appliance Module. Remote ON/OFF control of the connected load is possible. This plug-in Appliance Module is designed to work with other Evolve enabled devices. Evolve devices of other types can be added to the system. As part of a Evolve network, the LPM-15 will act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range of the wireless controller

No Description

Napco F-64KIT1 Includes: F-64 control panel, F-64TP Wireless-ready Touchpad with blue backlit display, F-TAB Dead Bolt sensor, F-BOLT-TRANS wireless transmitter (with battery) with bolt sensor and door contact inputs, TRF12 XFormer, (3) F-IFOB Digital Keys

Napco F-8KIT1 INCLUDES: F-8 CONTROL PANEL, F-TP WIRELESS-READY TOUCHPAD, F-TAB BOLTCUP SENSOR, F-BOLT-TRANS WIRELESS TRANSMITTER (WITH BATTERY) WITH BOLT SENSOR AND DOOR CONTACT INPUTS, TRF12 XFORMER, (3) F-IFOB DIGITAL KEYS