Security Systems and Surveillance

Product Features: Security Camera Accessories and Parts: Camera Mounts; Security Camera Type: Outdoor Cameras; Technology: Weatherproof

The HS3000 is a high security camera enclosures designed for installations such as ATM bank machines, prisons, detention cells, etc., requiring maximum protection from vandalism.

Product FeaturesLow Profile, Small "Wedge" StyleDesigned for Use with CCD Type CamerasFor Use in Fixed or Dropped (False) CeilingsHinged Door Opens for Convenient Access to CameraConstructed from Aluminum (Upper Section) and Steel (Lower Section)DocumentsProduct Specification Sheet(627 KB PDF)Installation/Operation Manual(51 KB PDF)

Product Features: Security Camera Accessories and Parts: Camera Mounts; Security Camera Type: Outdoor Cameras; Technology: Weatherproof; Security/Surveillance Type: Security Cameras

Pelco PA3512 Pole mount adapter for EM3512 mount. Minimum pole diameter 3-inch (7.62 cm). Stainless steel straps supplied. Strap length 28.5-inch (72.39 cm).

Product Features: Security Camera Accessories and Parts: Camera Mounts; Security Camera Type: Ceiling / Dome Cameras, Security Camera Accessories and Parts; Security/Surveillance Type: Housing and Mounting Accessories, Security Cameras

Pelco E706-16PS Dust-tight, non-pressurized with purge fittings, removable front and rear plates and sun visor. Stainless steel construction. 6-inch diameter and 16-inch length. Requires air supply.

Enclosure, environmental, pressurized. Aluminum, 6-inch inside diameter. w/ removable rear plate, lens preset capabilities, heaters. RediLINK® pre-wired connectors. Use w/ Legacy® PT780 pan/tilt. 20-inch length.

Pelco HS8080 Indoor/moderate outdoor ceiling mount. Aluminum vandal-resistant with hinged lower cover and special tool to secure. Lexan window with conduit knockouts on back box and sides.

Dust-tight, non-pressurized with removable front and rear plates and sun visor. Aluminum construction. 6-inch diameter and 16-inch lengthProduct Features6-Inch Inside DiameterEasily Installed and ServicedFor Use in Small Particle and Dusty EnvironmentsStainless Steel Mounting straps allow Enclosure to be Easily Positioned on, or Removed from, Mounting DeviceOptions include Heater, Blower, Air Funnel Kit, Sun Shield and Sun VisorAluminum or Stainless Steel ConstructionDocumentsProduct Specification Sheet(509 KB PDF)Installation/Operation ManualE706-16 A&E Specifications(11 KB RTF)E706-16P A&E Specifications(12 KB RTF)E706-16PS A&E Specifications(12 KB RTF)E706-16S A&E Specifications(15 KB RTF)BK700/HK700 Series Installation/Operation Manual(92 KB PDF)E700A Installation/Operation Manual(53 KB PDF)Sun Visor/Shroud Inst

The Pelco's PS20 series scanner is perfect for indoor and outdoor installations. Ruggedly constructed and completely sealed, the scanner features stepper motor technology for increased reliability; three speed settings selectable at installation; and microprocessor-controlled magnetic limit stops for quiet smooth operation.The PS20 is ideal for a wide array of surveillance installations and reduces the need for numerous fixed cameras. Designed to operate with loads up to 35 pounds, the medium duty scanner is easy to install and can be mounted to any flat surface in an upright or inverted position.The PS20 scanner is capable of auto and random scan operation without the need for a controller. Connected to a Pelco MPTAZ series control, the scanner can operate continuously, randomly, and manually. The PS20 series scanner is compatible with all Pelco scanner and pan/tilt hard wire controllers.

The Pelco HS8134 are high security ceiling mount enclosures designed for applications requiring maximum protection from vandalism. The HS8134 is constructed from heavy gauge steel for high damage resistance. The HS8134 feature a hinged lower cover that swings down to allow easy access to the camera and lens. The removable camera cradle can be easily positioned for various viewing angles, and conduit knockouts on the back box and sides allow cabling to be delivered from the wall (either side) or ceiling. There is no exposed mounting hardware securing the HS8134 to its mounting surface. Opening the enclosure can only be accomplished with a specially designed tool (included), eliminating the possibility of the enclosure being opened by unauthorized persons. An impact-resistant Lexan(R) window is supplied with the enclosure. The HS8080/HS8134 are also ideal for use in outdoor applications such as parking garages or other applications offering protection from environmental elements.Maxim

Dust-tight, non-pressurized with purge fittings, removable front and rear plates and sun visor. Aluminum construction. 6-inch diameter and 16-inch length. Requires air supply.

Indoor medium size with tamper switch. For corner mount applications. Constructed from 10-gauge steel. No mount required. Use optional hood (HS1500H) for mid-wall mounting

Pelco E706-16S Dust-tight, non-pressurized with removable front and rear plates and sun visor. Stainless steel construction. 6-inch diameter and 16-inch length.

Pelco PP451 Parapet adapter mount for Intercept or Spectra and DF5 series pendant domes (or other domes utilizing 1.5-inch NPT threaded pipe for mounting). Mounts to rooftop or flat horizontal surface. Removable end cap.

Product FeaturesEasy to InstallLightweight, Cast-Aluminum ConstructionSupports up to 150 Pounds (68 kg)For use with Legacy Integrated Positioning SystemsCan be Used with Optional Legacy LRD41 Series ReceiverOptional Access Panel Lock KitOptional Corner, Parapet and Pole Adapters AvailableThe LWM41 is a wall mount designed for use with all Legacy integrated positioning systems.Constructed from cast aluminum, the LWM41 is capable of supporting up to 150 pounds (68 kg). This timesaving and easy-to-install mount houses the entire Legacy system (pan/tilt, enclosure, and receiver) in one location. Video and power cables can be routed through the rear or bottom of the mount. A optional block-off plate is supplied for NEMA 4 and conduit applications. The bottom access panel is easily accessible for installation and maintenance of the optional receiver and an access panel lock kit (LK4500) is available for additional security.Optional Coaxitron receiver (LRD41A11 or LRD41C21/LR

Pelco DF5-0 Indoor, 5-inch in-ceiling discreet dome with fixed camera mount and smoked lower dome (1/2 f-stop light loss). Plenum rated back box.

Pelco EH2508-2 Enclosure, dust-tight and waterproof. Small aluminum cylindrical design. Meets NEMA4 and IP66 standards. Includes 24V dual element 15W heater for defog/defrost. 4.25-inch diameter and 8-inch length.

Pelco EH3508/MT Enclosure, environmental, small aluminum rectangular style with front hinged lid and rear link-lock latch. 8-inch length. Includes EM1450 wall mount.

Wall mount with cable feedthrough designed for use with Intercept or Spectra and DF5 pendant series. Supports up to 75 pounds. Can also be used with PP4348 for parapet rooftop applications. Black finish.

Spectra II pendant mount conduit adapter kit, black, for Spectra and DF5 domes. Use in pendant mount applications when conduit is being used for electrical connections. Must be used with BB5A-PB or BB5T-PB.

Enclosure, small aluminum rectangular style with removable front and rear end caps. 3 inch height and 10 inch length.

Enclosure, environmental, small aluminum rectangular style with removable front and rear end caps. 4-inch height and 10-inch length.

The EM1009U/EM1015U/EM1900U are medium duty enclosure mounts capable of supporting loads up to 40 pounds (18.14 kg). Designed for ceiling/pedestal and wall applications, these versatile mounts can be used with Pelco enclosures having a 2-inch (5.08 cm) mounting hole pattern. The EM1009U/EM1015U are ceiling/pedestal mounts and the EM1900U is a 90-degree wall mount. The ceiling/pedestal mounts are available in two lengths: 11 inches (27.94 cm) (EM1009U) and 17 inches (43.18 cm) (EM1015U). The EM1900U extends 15 inches (38.10 cm) from the wall to allow unlimited positioning of the enclosure. Constructed of aluminum, all three mounts feature an adjustable swivel head, which allows mechanical positioning of the enclosure. In addition, there is a 1-inch (2.54 cm) diameter cable feedthrough hole and openings in the top and bottom to conceal the wiring. These universal medium duty mounts are just another example of the many products we have designed for your ease of installation, while at the

Enclosure, indoor. Medium aluminum rectangular style with removable front and rear end caps. 4-inch height and 14-inch length.

Pelco SCA1 Ceiling mount reinforcement rails. Use in suspended ceiling applications where additional support for Spectra and DF5 series domes is needed due to weakness or instability of existing ceiling tiles.

Enclosure, small aluminum rectangular style with removable front and rear end caps. 3 inch height and 14 inch length.

Spectra II pendant mount conduit adapter kit, gray, for Spectra and DF5 domes. Use in pendant mount applications when conduit is being used for electrical connections. Must be used with BB5A-PG or BB5T-PG.

Enclosure, indoor. Economical interlocking aluminum "clamshell" design. Security rated with camera/lens access requiring removal of one tamper-resistant screw. 10-inch length.