Security Systems and Surveillance

No Description

Toshiba Single Channel MPEG4 DS Encoder PRODUCT ID: NE-VS100E High-performance, low-cost video encoder that provides instant network connectivity to any existing analog camera. Easy to deploy and configure, the Toshiba NE-VS100E enhances any CCTV installation by offering remote monitoring capabilities over the LAN, WAN or Internet. A looping video output enables the unit to function seamlessly with any DVR or VCR based system while providing high-frame-rate, low-bandwidth viewing over an ordinary broadband connection. Using advanced MPEG-4 compression, the NE-VS100E delivers performance and features unmatched by similar devices costing far more. Designed to bridge the gap between traditional closed-circuit television and next-generation IP-based video systems, the NE-VS100E represents the best of both worlds. Security installers can now experience the benefits of network video systems without the need for comprehensive training on TCP/IP protocols and network architecture

No Description

The MOM5(C) multi-output power distribution module converts one (1) non-power limited DC voltage input to five (5) power limited outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay will enable HVAC Shutdown, Elevator Recall or trigger auxiliary devices. Specifications: UL Listed for Fire (UL1481) and Access Control (UL294). File # S4707. CSFM - California State Fire Marshal Approved. File # 7300-1335:105. MEA - NYC Department of Buildings Approved. File # 10-97-E. NFPA72 compliant. Class 2 rated. 12VDC or 24VDC Operation. Five (5) individual power limited outputs. Current limit is 2.5 amps @ 12VDC or 24VDC per output. Fire...

No Description

No Description

Whole-house audio distribution is made easy. Impact Acoustics" Stereo Volume controls are ideal for use with whole-house sound systems. Locate the volume control within the room where the speakers are located for easy control of background sound levels. These volume controls are compatible with 8Ohm in-wall, in-ceiling or free-standing speakers.Features:10-position switch for output volume level; 20 watts per channel capacity; Screw terminals for easy connection; Off position removes volume control from system.

Panasonic RT404C 4 channel FM video rack card transmitter - multimode The RT404C from Panasonic Security is 4 channel FM video rack card transmitter - multimode. Rack Card Transmitter - Video Source.

Safeguard and protect your system against power surges and power your cameras over longer distances with the Q-See QS1018 Power Distribution Panel.

No Description

LED status indicators. Source specific IR routing. RJ45 or RCA input connectors and RJ45 or 110 output connectors. Any zone can select and listen to any source independently. Easily expandable to 8 zones.

impact acoustics(tm) audio distribution modules deliver whole-house audio from 1 or 4 sources such as cd dvd satellite or tuner to 8 locations. two volume controls are available to use with this system providing 10 watts of amplification per room! simply press the selector button on the volume control to toggle through the attached devices. the built-in ir extender give you complete control of your source devices when you use the volume control withn ir target and connect ir emitters to the distribution module. connection between the module and volume control is simple using economical unshielded twisted pair cable. connect speakers to the volume control using standard in-wall cl2 rated speaker wire. features: four line level inputs at the distribution module. connect to volume controls via economical utp cable. 10watt amplifier within the volume control. ir extender for optional ir system control.

Product Features: Security/Surveillance Type: Connection Centers and Modules

Product Features: Connection Center and Module Type: Connection Centers; Security/Surveillance Type: Connection Centers and Modules

GE Security offers a Rough-In Kit that Contains (1) 20'' Connection Box (1) Dust Cover (4) Flexible Grommets, to be used with either the Basic or Premium Series Smart ConnectionCenter. No power assembly.

No Description

No Description

HIGH QUALITY, MOTION JPEG VIDEO AT FULL FRAME RATE; THAT IS, 25 (PAL) OR 30 (NTSC) FRAMES PER SECOND ON EACH CHANNEL 10 DIFFERENT RESOLUTIONS UP TO 768 X 576, AND 5 DIFFERENT COMPRESSION LEVELS BUILT-IN VIDEO MOTION DETECTION 4 F

Power distribution module 1x6 1.5 amp with plug in pow input: 120 vac 60hz, 33.5w output: 13vdc @ 1800ma. cof white.

RJ45 and 110 punch down connectors. Local and system audio inputs with selectable priority. 4 common IR emitter outputs. Page through speakers in the house. Includes power supply.

Marshall Electronics VS-102-HDMI HDMI Over IP Video Server VS-102-HDMI Marshall Electronics' VS-102-HDMI is a High Definition Video Server that allows real-time transmission of an SD/HD-SDI, HDMI, or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDSDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth. The VS-102-HDMI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDSDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its original high definition state. Additionally, other computers o

Payment Policy Brand New Sony CyberShot 8 MP Di NEW AXIS 2400+ BLADE 4-CHANNEL CCTV VIDEO RACK SERVER Attention All Buyers If there is anything wrong with the item that you have purchased, please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description NEW AXIS 2400+ BLADE 4-CHANNEL CCTV VIDEO RACK SERVER New Condition Axis Communication Video Server Blade Rack Module Model : Axis 2400+ Blade

Supports four LCD displays and four camera inputs This product is not backwards-compatible with the prior LCD screen (F2297-XX) Power supply not included. Recommend On-Q/Legrand PW1060. Enables camera viewing via TV with the TV Display Interface Bracket included

1-channel video encoder together with a small IP66 covert camera. Dual streaming in H.264 and Motion JPEG; max. D1 resolution at 30/25 fps. Video motion detection. Power over Ethernet (IEEE 802.3af) only with power out for the covert camera.

The MOM5 multi output power distribution module converts one (1) non-power limited DC voltage input to five (5) power limited outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc... These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay will enable HVAC Shutdown, Elevator Recall or trigger auxiliary devices. Specifications: NFPA72 compliant. Class 2 outputs. 12VDC or 24VDC Operation. Five (5) individual power limited outputs. Current limit is 2.5 amps @ 12VDC or 24VDC per output. Fire Alarm Panel or Access Control System trigger inputs. (N.O. or N.C. supervised trigger input and polarity reversal trigger input). Red LEDs indicate condition of each power output.

Soft ON/Fade OFF feature provides smooth brightness level changes and extended bulb life Plug-in Lamp Module adds convenience of remote ON/OFF and DIM/Bright DHC switching capability to plug-in incandescent lamps Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON Provides one-button programming through address capturing HCP03-10W responds to Leviton's DHC controllers as well as any X10 compatible controllers from any other manufacturer, Weight: 0.25 lbs., Manufacturer: Leviton

Review and buy the American Fibertek MRM-1605P Video/Panasonic Proteus Module RX, MM made by Fibertek in our [Category] section.

Safeguard and protect your system against power surges and power your cameras over longer distances with the QS1009 9 camera power distribution panel.

No Description

No Description