Refrigerators

Wine Cooler, Capacity: 52 bottles, Door Opens to Left and Right

Commercial, 12.5 cu. ft., Door Opens to Left and Right

Beverage Dispenser

Nominal 6' x 8' walk-in cooler; No floor model; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 1' 4.75" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 7' 10" x 5' 10 1/2" x 7' 6"; 35°F holding temperature; 55°F entering temperature; 85°F ambient temperature; 208/220v; 1/2HP; 1-ph; hermetic; 4332 BTU requirement; 10 year panel warranty. 1 year parts warranty.

Beverage Dispenser, 6.4 cu. ft., Door Opens to the Right, Efficiency: Energy Star Compliant

Perlick 4-keg self-contained refrigerated utility cooler perlick 4-keg utility coolers have a self-contained refrigeration system. the compact size takes up little space in your kitchen or bar area. this cooler is designed specifically to store draft beer kegs. features include a galvanized steel interior and exterior, a flush-mounted, self-closing door, and "cam-lock" construction for easy installation. standard features: stucco pattern galvanized steel 30" x 55" self-closing right hinged door magnetic gasket and chrome handle flush-mounted with can-lift chrome hinges 4" ul class 1 urethane foam r-134a refrigerant includes junction box thermometer furnished loose flame spread rating: 25 or less smoke develop rating: 450 or less additional information: capacity: 4 kegs width: 47" depth: 47" height: 77" ship weight: 700 lbs 115 volts, 60 hz, 1 phase 1/3 hp, 8.5 amps nsf and ul listed 1-year parts and labor warranty model #: us4kp 130377

Nominal 8' x 8' walk-in cooler; No floor model; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 7' 10" x 7' 10" x 7' 6"; 35°F holding temperature; 45°F entering temperature; 85°F ambient temperature; 208/220v; 1/2HP; 1-ph; hermetic; 4684 BTU requirement; 10 year panel warranty. 1 year parts warranty.

Nominal 8' x 10' walk-in cooler; No floor model; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 9' 9 1/2" x 7' 10" x 7' 6"; 35°F holding temperature; 45°F entering temperature; 85°F ambient temperature; 208/220v; 3/4HP; 1-ph; hermetic; 5427 BTU requirement; 10 year panel warranty. 1 year parts warranty.

Beverage Dispenser, 6.4 cu. ft., Door Opens to the Right

Perlick 10-keg self-contained refrigerated utility cooler perlick 10-keg utility coolers have a self-contained refrigeration system. the compact size takes up little space in your kitchen or bar area. this cooler is designed specifically to store draft beer kegs. features include a galvanized steel interior and exterior, a flush-mounted, self-closing door, and "cam-lock" construction for easy installation. standard features: stucco pattern galvanized steel 30" x 55" self-closing right hinged door magnetic gasket and chrome handle flush-mounted with can-lift chrome hinges 4" ul class 1 urethane foam r-134a refrigerant includes junction box thermometer furnished loose flame spread rating: 25 or less smoke develop rating: 450 or less additional information: capacity: 10 kegs width: 93" depth: 47" height: 79" ship weight: 1150 lbs 115 volts, 60 hz, 1 phase 1/2 hp, 10.2 amps nsf and ul listed 1-year parts and labor warranty model #: us10kp 430951

32 1/2 height for use in ADA compliant settings. Makes up to 65 lbs. of clear ice in a day cycle. Flexible design allows built-in or freestanding use in 17 wide spaces. Versatile design is ideal for hotels wet bars and restaurants. Save time and energy with low maintenance automatic defrost. Body Finish: SS(Stainless Steel). Door Finish: Black. Exterior Options: Pump(Pump included). Canadian Electrical Safety: ULC. Compressor Warranty: 5 Years. Defrost Type: Automatic. Depth: 21.25 . Height: 32.5 . Width: 16.75 . Parts/Labor Warranty: 1 Year. US Electrical Safety: UL. Voltage/Frequency: 115 V AC/60 Hz. Door Swing: Sliding. Fan Type: Exterior. Freon Oz: 6.88. Freon Type: R134a. High Side PSI: 320. Low Side PSI: 120. Thermostat Type: Dial

US Cooler 8'x8' I/D Walk-in Cooler-I/D Remote Ref.-NEW New US Cooler Indoor Walk-in Cooler Indoor Box with 3/4 HP Indoor Remote Refrigeration With Floor 8' X 8' X 7' 6" Nominal (7' 10 " X 7' 10 " X 7' 6" Actual) Model CL710710FL.D 4758 * This walk-in comes with a 3/4 HP remote indoor refrigeration system. * This indoor walk-in requires a minimmum of 5, 442 BTUs. * Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit. PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvalume steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high density polystyrene foam insulation sandwiched between stucco embossed 26 gauge galvalume outside and 22 gauge stainless steel inside. DOOR - 34 x 76 flush-mount c

Nominal 8' x 8' walk-in freezer; Floor: 7' 10" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Non-charged preassembled low temp refrigeration system. Includes: hermetic compressor, outdoor weather hood, crankcase heater, start kit, high/low pressure control, receiver, liquid filter/sight glass/moisture indicator, flooded head pressure control valve, electric defrost time, evaporator, expansion valve, and solenoid valve, and drain line heater; Actual unit dimensions: 7' 10" x 7' 10" x 7' 6"; (-)10°F holding temperature; 20°F entering temperature; 85°F ambient temperature; 208/220v; 1 1/2HP; 1-ph; hermetic; 5155 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Nominal 6' x 8' walk-in cooler; Floor: 7' 10" x 5' 10 1/2"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 1' 4.75" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 7' 10" x 5' 10 1/2" x 7' 6"; 35°F holding temperature; 55°F entering temperature; 85°F ambient temperature; 208/220v; 1/2HP; 1-ph; hermetic; 4332 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

US Cooler 8'x10' I/D Walk-in Cooler, Penthouse Ref.-NEW New US Cooler Walk-in Cooler Indoor BOX 3/4 HP Penthouse Indoor Refrigeration With Floor 8' X 10' X 7' 6" Nominal (7' 10 " X 9' 9 1/2" X 7' 6" Actual) * This walk-in comes with a 3/4 HP penthouse indoor refrigeration system. Penthouse Systems provide two great advantages. First it comes with a condensate evaporator and does not require the installation of an evaporator condensate line. Second, and probably the most important advantage, is that there is not an evaporator coil hanging inside the walk in to hit your head on, or come in the way of shelving and take up precious storage space inside the walk in. This indoor walk-in requires a minimum of 6, 326 BTUs PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvalume steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly o

Nominal 8' x 10' walk-in cooler; Floor: 9' 9 1/2" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 9' 9 1/2" x 7' 10" x 7' 6"; 35°F holding temperature; 45°F entering temperature; 85°F ambient temperature; 208/220v; 3/4HP; 1-ph; hermetic; 5427 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Nominal 8' x 10' walk-in freezer; Floor: 9' 9 1/2" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Non-charged preassembled low temp refrigeration system. Includes: hermetic compressor, outdoor weather hood, crankcase heater, start kit, high/low pressure control, receiver, liquid filter/sight glass/moisture indicator, flooded head pressure control valve, electric defrost time, evaporator, expansion valve, and solenoid valve, and drain line heater; Actual unit dimensions: 9' 9 1/2" x 7' 10" x 7' 6"; (-)10°F holding temperature; 0°F entering temperature; 85°F ambient temperature; 208/220v; 1 1/2HP; 1-ph; hermetic; 5600 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

US Cooler Indoor Walk-in Cooler 3/4 HP Top Mount Refrigeration Without Floor 8' X 8' X 7' 6" Nominal (7' 10 " X 7' 10 " X 7' 6" Actual) Model CL710710NF.D W/ 4629 * This walk-in comes with a 3/4 HP top mount indoor refrigeration system. System comes with a condensing unit, evaporator unit, and associated parts installed on a walk in cooler plug. This unit is pre-charged and ready to be set in the top mount refrigeration hole on top of the walk in. * This indoor walk-in requires a minimum of 5, 783 BTUs Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit. REFRIGERATION - Top mounted refrigeration system, self contained, med temp, 1 phase, 3/4 HP, hermetic, 208-230 volt. Includes: Copeland condensing unit, evaporator, thermostatic expansion valve, high pressure control, sight glass, drier, solenoid valve, thermostat. maximum low 35 degrees. refrigerant - R22. Unit mounts on a 22 1/2" x 33" plug.(Refrigeration is based on an altitude of 5000 fee

Nominal 8' x 8' walk-in cooler; Floor: 7' 10" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 7' 10" x 7' 10" x 7' 6"; 35°F holding temperature; 45°F entering temperature; 85°F ambient temperature; 208/220v; 1/2HP; 1-ph; hermetic; 4684 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Nominal 8' x 12' walk-in cooler; Floor: 11' 9" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Cooler exterior: Pre-assembled outside refrigeration system, copeland condensing unit, evaporator, thermostatic expansion valve, sight glass, drier, solenoid valve, thermostat, winter controls (does not include refrigerant- r404a.; Actual unit dimensions: 11' 9" x 7' 10" x 7' 6"; 35°F holding temperature; 45°F entering temperature; 85°F ambient temperature; 208/220v; 3/4HP; 1-ph; hermetic; 6144 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Nominal 6' x 8' walk-in freezer; Floor: 7' 10" x 5' 10 1/2"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 1' 4.75" from back corner on left width wall; Non-charged preassembled low temp refrigeration system. Includes: hermetic compressor, outdoor weather hood, crankcase heater, start kit, high/low pressure control, receiver, liquid filter/sight glass/moisture indicator, flooded head pressure control valve, electric defrost time, evaporator, expansion valve, and solenoid valve, and drain line heater; Actual unit dimensions: 7' 10" x 5' 10 1/2" x 7' 6"; (-)10°F holding temperature; 0°F entering temperature; 85°F ambient temperature; 208/220v; 1 1/2HP; 1-ph; hermetic; 4164 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Nominal 8' x 12' walk-in freezer; Floor: 11' 9" x 7' 10"- 4" extruded insulation, 22 ga stainless steel interior, stucco embossed galvalume 26 ga exterior; 4" extruded polystyrene insulation; Stucco embossed galvalume (a metal alloy coating that is composed of aluminum, zinc and silicone) 26 ga interior and exterior construction; Grey vinyl screening by the foot; Medium temperature inside and out; Cooler interior: Floor, light, switch, thermometer, door closure, flush mount, spring loaded, hinge left 2' 4 1/2" from back corner on left width wall; Non-charged preassembled low temp refrigeration system. Includes: hermetic compressor, outdoor weather hood, crankcase heater, start kit, high/low pressure control, receiver, liquid filter/sight glass/moisture indicator, flooded head pressure control valve, electric defrost time, evaporator, expansion valve, and solenoid valve, and drain line heater; Actual unit dimensions: 9' 9 1/2" x 7' 10" x 7' 6"; (-)10°F holding temperature; 20°F entering temperature; 85°F ambient temperature; 208/220v; 1 1/2HP; 1-ph; hermetic; 5974 BTU requirement; 10 year panel warranty. 1 year parts warranty.; NSF certified

Contact US: 817.640.3131 E-Mail Us Espresso | Gelato | Granita | Panini | Pasta About Contact Us Website Desmon Professional Commercial Refrigerator Description - Specifications -Width:27 Height:81 Depth:28 Voltage:110V This is a beautiful masterpiece of a fridge! Please call me, Domenic, at 817-640-3131 if you have any questions.Features Reach in depth 71.5c m Electronic Control Ventilated Automatic defrost Exterior in S/S AISI 430 Interior Aluminum Polyurethane Insulation CFC free Adjustable

Item Description Payment Info Bob and Don Restaurant Equipment US Cooler 6'x8' Indoor Walk-in Cooler-Indoor Ref. - NEW New US Cooler Indoor Walk-in Cooler 1/2 HP remote Indoor refrigeration system Without Floor 6' X 8' X 7' 6" Nominal (5' 10 1/2" X 7' 10 " X 7' 6" Actual) Model CL710510NF.D 3543 U.S. Cooler manufactures premium walk-in coolers, freezers, and combination units at competitive prices. These installations are used for all types of cold storage. Various applications in

US Cooler Walk-in Cooler Indoor BOX 3/4 HP Top Mount Refrigeration With Floor 8' X 10' X 7' 6" Nominal (7' 10 " X 9' 9 1/2" X 7' 6" Actual) Model CL99710FL.D 5768 * This walk-in comes with a 3/4 HP top mount indoor refrigeration system. System comes with a condensing unit, evaporator unit, and associated parts installed on a walk in cooler plug. This unit is pre-charged and ready to be set in the top mount refrigeration hole on top of the walk in. This indoor walk-in requires a minimum of 6, 326 BTUs PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvalume steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high density polystyrene foam insulation sandwiched between stucco embossed 26 gauge galvalume outside and 22 gauge stainless steel inside. DOOR - 34 x

Exsun Electrical and Thermo Beer Cooler with LED Indicator WBC-TH(A) The Electric Beer Cooler features a dependable cooling system and adjustable thermostat. Its capacity is suitable for 4-L, 5-L and 6-L beer kegs as well as for juice, red wine and other drinks. Its has a loading capacity up to 340pcs./20ft., 660pcs./40ft. and 790pcs./40hc. WBC-TH(A) Usable Kegs: 4L, 5L with adapters Appropriate for beer, wine, juice, club soda and water cooling, with an adjustable temperature that can be set for different drinks Adjustable thermostat 6L kegs are available 220 V-240 V/50 Hz, 220 V-240 V/60 Hz and110 V-115 V/50 Hz are available What's In The Box: Kegs, Adapter, Air Incoming Pipe, Beer Outgoing Pipe Exsun was regarded as a start brand in Foshan Shunde Excell Electrical Co., Ltd..

Store Payments Shipping Feedback Terms About Us Bakedeco.com Auctions We Aim For Your 100% Satisfaction Universal Coolers Under Counter Refrigerator Custom Made Size Brand New Click Images To Enlarge if you do not see them Please scroll down the page Model # Custom Volts 115 Serial # Phase 1 Width 36" Hz 60 Depth / with Handles 32" / 34" Refrigerant Height 34 1/2" Shipping Weight 200 Lb This Universal Custom Made Under Counter refrigerator was custom made for a Customer and he did not take it ,

Ref-NEW New US Cooler Walk-in Cooler Indoor BOX 1 HP Saddle Mount Indoor Refirgeration Without Floor 8' X 10' X 7' 6" Nominal (7' 10 " X 9' 9 1/2" X 7' 6" Actual) Model CL99710NF.D 5262 This indoor walk-in requires a minimum of 6, 752 BTUs PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvalume steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. REFIRGERATION-Saddle mounted inside refrigeration system, self contained, med temp, 1 phase, 1 HP, hermetic, 208/230 volt. Includes: Copeland condensing unit, evaporator, thermostatic expansion valve, high pressure control, sight glass, drier, solenoid valve, thermostat. maximum low 35 degrees.

US Cooler 8'x10' I/D Walk-in Cooler, O/D Remote Ref-NEW New US Cooler Walk-in Cooler Indoor BOX 3/4 HP Outdoor Remote Refrigeration With Floor 8' X 10' X 7' 6" Nominal (7' 10 " X 9' 9 1/2" X 7' 6" Actual) Model CL99710FL.D 5486 * This walk-in comes with a 3/4 HP remote outdoor refrigeration system. This indoor walk-in requires a minimum of 6, 326 BTUs. PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvalume steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high density polystyrene foam insulation sandwiched between stucco embossed 26 gauge galvalume outside and 22 gauge stainless steel inside. DOOR - 34 x 76 flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge stucco emboss

Item Description Payment Info Bob and Don Restaurant Equipment US Cooler 8'x8' Indoor Walk-in Cooler Saddle Ref.-NEW New US Cooler Indoor Walk-in Cooler 3/4 HP Saddle Mount Refrigeration Without Floor 8' X 8' X 7' 6" Nominal (7' 10 " X 7' 10 " X 7' 6" Actual) Model CL710710NF.D W/ 4982 U.S. Cooler manufactures premium walk-in coolers, freezers, and combination units at competitive prices. These installations are used for all types of cold storage. Various applications include rest