Photography Accessories

No Description

Tripod, Ballhead

A low-cost alternative in lighting stands that can hold a total of 16 PAR cans! Includes two tripod base lighting stands with three section shafts and T-bars. T-bars hold four par cans each. Also includes two 5 truss sections, holding four par cans each, for a total of 16 par cans. Easy assembly with screw-on plastic brackets and thumb screws which allow for height adjustments. Intended for use only with static lights....

Center columns are important accessories for the Systematic range of tripods, giving extra height and making framing adjustments easier.

DaKine Mission Photo Backpack: DaKine went on a mission to create a photo backpack that had, quite literally, everything you could possibly need on the hill, and returned triumphantly with the DaKine Mission Photo Backpack. Just think of all the possibilities that come with a removable padded camera block, vertical board carry, deployable tripod carry, back access entry, side organizer pockets, and a deployable rain cover. All that’s missing is your go-go-gadget camera.

Removable and full adjustable harness with contoured mesh straps - Built-in all weather cover - Removable padded handle & shoulder strap.Created specifically for nature and sports photographers, the Lens Trekker 600 AW II backpack is designed to perform in any environment, from the rugged backcountry to a crowded sports stadium. It features the Lowepro Pack Jack Harness System-an ergonomic, removable and fully adjustable harness with contoured mesh straps, plus a padded waistbelt and back pad with lumbar support for added comfort. A drop-down zipper provides full access to gear and features 6 memory card pockets on the inside lid. The built-in All Weather Cover protects large-sized gear from wind, rain and dust. The main compartment fits a professional DSLR with attached 600mm telephoto lens, or unattached 800mm lens, plus lens hood and tripod collar.

Improved ergonomics / A more solid grip & better control / Better fluidity / 1.8 pounds / Load capacity: 8.8 pounds / 360° rotation / Height: 3.7 inches

Bogen Manfrotto 468MGRC2 Hydrostatic Tripod Bowl Head with RC2 Rapid Connect System, brand new by Bogen Manfrotto

Product Features: Photography Accessory Type: Carrying Cases and Camera Bags, Tripod Accessories; Tripod Accessory Type: Tripod Bags and Straps, Tripod Heads

The Explorer Kit is another example of unique head and tripod combination. This kit is a powerful incredibly versatile solution that allows to explore new shooting perspective, for unique, original and non-conventional pictures. Ideal for creative photographers, it is equally effective in indoor and outdoor application. This kit especially comes with spike feet (item code G1220.129B3) assembled straight in the factory. TECHNICAL SPECIFICATIONS: maximum height 71.3”: closed length 29.5”: weight 5.3 lbs: maximum capacity 11 lbs.

Tripod

Elinchrom #26141 8" Reflector - #26055 8° Honeycomb Grid - #26054 12° Honeycomb Grid - #26053 20° Honeycomb Grid - #26052 30° Honeycomb Grid -.This Kit consists of Elinchrom's 8.25" Diameter Reflector, which fits all Elinchrom Flash Heads & Monolights, plus 4 Honeycomb Grids that easily fasten to the front of the reflector. Each Grid creates its own narrow field spread of light of 8, 12, 20, or 30°.

The DL-5S extendable dolly makes dolly shots on smooth hard surfaces a snap. Allowing you to dolly in any direction without the need for tracks. Each wheel has a foot activated lock/release pedal making it easy to lock-down and release without having to bend over.

No Description

5- Inch wheels for extremely smooth operation Folds for easy transport Wheels are individually braked for safety and security Supports up to 132 pounds Aluminum construction for lightness and durability

Designed to fit all foot types Aluminum construction for lightness and durability Smooth Rolling 3- Inch wheels Black finish to reduce reflections

This lightweight, high-mobility pack provides foam-padded protection and quick access to multiple SLRs, lenses, flash and accessories.

Recessed zippers Comfortable carrying handle Easy access even with the bigger video tripods Inner pocket for tripod accessories storage Thermoformed padding

It s no secret that digital cameras and flashes are power hungry ? look how many times you have to replace or recharge your batteries. To end this energy crisis, Quantum has created the QB1 Compact Battery that delivers four to six times the power of typical rechargeables. For flash, recycling speed is three times as fast as alkalines and a third faster than nicads. All this power is concentrated into an extremely lightweight, compact 12 oz. (340g) battery. The QB1 Compact easily attaches to the tripod socket of most digital and traditional cameras or can be worn on your belt with the convenient belt clip (included). The Fuel Gauge displays the power remaining and the charging level and when powering your flash, recycling speed is three times as fast as alkalines and a third faster than nicads. Recharges in three to four hours.

Product Features: Photography Accessory Type: Tripod Accessories

The ZC-3DV is a universal controller for LANC* and Panasonic Mini DV or HDV cameras, simply change the switch.(PAT) Zoom speed is variable from slowest to fastest by a very sensitive thumb switch. Equipped with outlet cable. Versatile usage - ZC-3DV clamps on tripod pan handles, monopod, stabilizer and other similar devices. Lightweight and compact size. An incomparable combination of value and quality.

The Digital PRO was the beginning of the Digital PRO Series. Designed for the photographer who prefers a right-handed grip, this lightweight, compact bracket helps capture images quickly.

The Libec JB-30 Jib Arm with UM-3 Undermount Adapter attaches quickly and easily to most conventional heads and tripods, giving it flexibility for use as a cost-effective studio crane where on-shot elevation is required, or on location where setup speed are critical. It provides precisely balanced booming with a load capacity of 44-lbs, from absolute ground level to 72-inch in height.

Simple tilt head to allow a camera on a Monopod to be turned 90° to provide either vertical or horizontal format. With quick release camera plate system and secondary safety lock.

Compact yet heavy-duty fluid video head capable of accommodating a payload up to 22 pounds Interchangeable springs provide one spring for cameras in the two- to 10-pound range, and a separate spring for cameras within the 11- to 22-pound range Fluid drag is easily controlled with a large numbered knob for repeatable settings and reference, with 360-degrees of pan, and +91.5- to -90-degrees of tilt Features a head height of 5.9 inches, and a head bowl of 75 millimeters, and includes both independent pan and tilt locks Backed by a manufacturer's 2-year warranty

Attaches to your camera tripod port to stay securely attached to your camera at all times so you never lose it Neoprene fabric stretches to fit most compact point and shoot cameras Velcro closure for easy opening and closing so you never miss a shot Wraparound design provides soft, abrasion-resistant protection in a slim, sleek wrap design Easy to attach, tighten and loosen screw does not require any tools, just your fingers. Convenient for when you need to access your battery or memory card compartment

Giotto s Pro II ball head series features a light and extra large ball with ball hollowed structure designed and manufactured to precisely position the camera both easily and securely. Each has a stable and smooth base allowing fluid effect pans. Pro II features a slim and light body structure yet it is hardness strengthened, strong enough to support the heaviest of professional SLR s. Each head features 3 separate safety knobs which provide optimal security as well as convenience. A friction control knob, and a separate locking knob for pan control are provided in addition to the main locking knob. Giotto s has designed various camera mounts and sliding plates to fit these socket bases. All of the plates feature safety locks with an auto lock retaining system and flanged edges to prevent camera slippage when shooting vertically. It is reversible when not needed. The MH-657 clamp style quick release system is compatible with plates that fit the Arca Swiss standard.

CAMERA STABILIZATION AND DOLLY PLATFORM WHEELS You are purchasing 4 sets. The WB1's are swivel wheel assemblies for camera dolly platforms CAMERA STABILIZATION AND DOLLY PLATFORM The swivel allows the wheeels to performing on curved or straight track.

Product Features: Photography Accessory Type: Tripod Accessories

No Description