Musical Instruments

The PA435X was designed to meet the audio power amplifier needs of custom installed multi-zoned systems with high sonic quality. It is a 4-channel amplifier that is primarily intended to interface with the MRC88 whole-house audio video entertainment system for zones 7 and 8 preamp outputs or for sub-zone amplification of zones 1-6. It may also be used as a standalone single or 2-zone amplifier.

CS½ 1400 Building on the reputation of the world-famous Peavey CS½ 800, which conquered the power amp market in the 1970s, the CS½ Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT compression/anti-clipping protection. With its 2RU design and power points up to 4080 watts, this latest evolution of the CS½ Series is leaner, louder and lighter than ever.

No Description

The RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance transformer and a fused power line. The MOSFET output stage is fault protected which allows the RA200 to forgive momentary output shorts, and has over-temperature protection. CAUTION The RA200 is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided.

The RA150 is designed to provide more power and betterperformance, at a lower overall cost per watt than the earlier RA100.As a result, it can more closely match the power needs of virtually anypassive speaker or studio monitor, and provides a crisp, clean signalfor outstanding performance and extended speaker life.

550 Watt amplifier. XLR, 1/4 in., Neutrik Speakon, 5-Way binding post connectors., The new P-Series amps are an ideal match to Yamaha's popular Club Series loudspeakers and deliver a robust amount of pro quality power in a wide range of configurations designed to suit most any need. To achieve this, they're designed with big power output, and equipped with YS (Yamaha Speaker) Processing to deliver a signal that is tuned to the needs of the Club Series loudspeakers.

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

No Description

The D-45 is perfect for moderate power applications such as recording or broadcast studio near-field monitoring, video suite audio monitoring, a recording/broadcast headphone amp or a small paging system. Designed, built and carefully checked to ensure reliable operation with a wide variety of loads, Crown D-45 amplifier is convection cooled. Their high reliability is particularly important in reducing maintenance costs.

4 Channels, Frequency Response: 20 Hz - 20 kHz

Input sensitivity & imp: .77V Freq resp: 10 Hz 50 kHz @ 1.5 dB XLR & , 6.5mm jack, balanced & RCA unbalanced inputs IPP high-power output to drive professional loudspeakers without clipping 3 Speakon outputs for channels A/B/bridge 5-way binding banana plug channel outputs Comprehensive front panel indicators including signal, clip, protect & bridge Stereo, parallel mono & mono bridge Front-to-rear airflow & cooling fan for thermal stability & reliability Variable speed fan for low noise Limiter circuit switch for amp output protection DC output protection & short circuit protection Bridge control & ground lift switches Total harmonic distortion: less than 0.1% 5000W Signal-to-noise ratio: 20 Hz 20 kHz @ 100 dB

The PV IPR DSP 1600 boasts 900 watts RMS per channel at 2 ohms and is under 7lbs. The IPR DSP features independent, assignable crossover points, delay, EQ presets, security lock settings and a intuitive setup wizard.

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Product Features: Guitars Amps Type: Guitar Power Amps; Musical Instrument Type: Guitars, Amps and Accessories

RMX 850 amplifier delivers true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16 deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.

The RMX Series amplifiers give you clean dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched performance at a new breakthrough pric

This power amplifier features Accelerated Transient Response (ATR) technology that gives your audio dynamic punch and thermal overload protection on each channel to ensure safe operation.

Russound D250LS 50W per channel power amplifier.

Ideal for powering near field monitors or a headphone amplifier, the Servo 120 gives you "reference-class" audio performance and reliability in a compact package. A perfect fit for recording, live sound and home theater situations, the 120's bipolar design and toroidal transformer power supply ensure reliability and quiet performance. A headphone jack with a speaker-disable switch lets you work through late night mixing sessions without disturbing anyone.

Part of Peavey's IPR Series, the IPR 1600 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a highhigh-speed class D topology that yields the supremely high audio resolution and productivity.The Peavey IPR 1600 features two channels with independent, 100Hz crossovers and produces 530W per channel at 4 Ohms, or 800W per channel at 2 Ohms. Peavey's exclusive DDT speaker protection with multi-point clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. It also features a variable-speed fan housed in a lightweight aluminum chassis.

Marathon DJ-6000. Great for professional DJ & entertainers who demands power on a limited budget. Every DJ Series amplifier provides excellent performance for all the speakers. Reliable features such as Input Gain, Ground Lift Switch to eliminate hum, Power LEDs, Channel 1 & 2 level, LED’s indicator, Stereo, parallel mono and bridge modes, Clip indicator and each DJ Series amplifier also comes with dual speed DC fan for efficient cooling and prevents overheating. Power Handling: 2 x 900 Watts @ 8 Ohms / 2 x 1800 Watts @ 4 Ohms / Up to 6000 Watts @ 8 Ohms. Features: Input Gain (dB), Power LEDs, Signal Activity LEDs (Signal), Overload LEDs (Clip), Fault LEDs (Fault), Power Switch, Channel 1 & 2 Level LED Indicator, Cannon and Input Jack Connector, Mode Switch, Ground Lift Switch, Binding Post Outputs, Power Select 110V-120V or 220V-240V Power Supply, Power Input IEC Power AC, Fan Grill Two 2 Speed DC Fans.

QSC RMX1450 700W/Channel @ 2 Ohms Stereo Power Amplifier BRAND NEW - Unopened item. Full Manufacturer Warranty Hassle Free 30 Day Returns Click here to check real time stock and possible LOWER prices! RMX1450 Stereo Mode Power: 280w/ch 8-ohms, 450w/ch 4-ohms, 700w/ch 2-ohms Mono Bridge Mode Power: 900w 8-ohms, 1400w 4-ohms The new RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched perform

Input sensitivity & imp:.77V. Freq resp: 10 Hz 50 kHz @ 1.5 dB. XLR & , 6.5mm jack, balanced & RCA unbalanced inputs. IPP high-power output to drive professional loudspeakers without clipping. 3 Speakon outputs for channels A/B/bridge. 5-way binding banana plug channel outputs. Comprehensive front panel indicators including signal, clip, protect & bridge. Stereo, parallel mono & mono bridge. Front-to-rear airflow & cooling fan for thermal stability & reliability. Variable speed fan for low noise. Limiter circuit switch for amp output protection. DC output protection & short circuit protection. Bridge control & ground lift switches. Total harmonic distortion: less than 0.1%. 2000W. Signal-to-noise ratio: 20 Hz 20 kHz @ 90 dB.

The PA601 is the perfect choice for distributed background music (BGM) systems when the requirement is simple amplification without MOH or advanced mix functionality. • Power output: 60 watts RMS • Speaker outputs: 4 ohm, 70.7V, and 100V

Product Features: Musical Instrument Type: DJ Equipment; Live Performance Equipment: Power Amps

Behringer™s EUROPOWER EPQ304 Professional 300-Watt Light Weight 4-Channel Power Amplifier. The EPQ Series power amplifiers pack the power of Accelerated Transient Response (ATR) technology into an exceptionally lightweight package.

Serious performance! Five decades of power amp innovation have been rolled into Crowns impressive new XLS Series of amplifiers. Each amplifiers features flexibility you'll appreciate, including multiple inputs, so you can plug in anything anything and play anywhere. First of all, these beasts each weigh less than 12 lbs. - compared to many 40-lb. competitors - yet they sport integrated crossovers, an advanced switched-mode power supply, and Peak-x limiters to protect your entire system. All in all, engineered to meet the most demanding of audio needs - yet priced to fit comfortably into any gigging band's budget - the XLS Series represents a powerful argument for flexibility, performance, and value.

The PLX1804 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX1804 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3, 600 watts, PLX1804 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.

Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 1002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What's more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 1002 to your system. Beyond that, there are three fan modes you can choose from - normal, early, and fullspeed - so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 1002, gives you an excellent solution for power amplification.

The PLX2 series is a range of premium quality high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology PLX2 amplifiers combine light weight superlative audio quality and proven QSC reliability. With power ratings up to 3 600 watts PLX2 amplifiers are capable of providing plenty of clean undistorted output to the most power hungry speaker systems.