Musical Instruments

The Series One S1-200 Tube guitar amp head is a leader designing sought-after amplifiers, by featuring intuitive controls, comprehensive range, and sturdy construction to stand the rigors of the road. The unique Bright / Warm switch control actually reconfigures the pre-amplifier voicing and power amplifier damping to reproduce either ringing Class A performance in the Bright mode, or crunchy Class AB tones in the Warm setting. Careful attention was paid to the levels of overdrive available when designing the S1-200 Crunch Channel. Blackstar wanted to cover the widest range of crunch gain levels from just on the edge clean break-up, to crushing modern rhythm tones. To this end the Crunch / Super Crunch switch alters both gain levels and tonal shaping for maximum crunch flexibility. The overdrive channels are characterized by a tone that's high in gain, but lacks any of the detached top-end often found in many similar designs.

Blackstar Series One 100 Valve Guitar Head - 2x ECC82, 3x ECC83 and 4x EL34 valves, 2x channels with 4x modes, clean channel with warm (class A) and bright (plexi) modes, crunch mode, ISF tone control, presence, overdrive channel with crunch and super mode, master volume, all valve effects loop, MIDI in & out, emulated speaker output, includes footswitch.

No Description

No Description

The RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance transformer and a fused power line. The MOSFET output stage is fault protected which allows the RA200 to forgive momentary output shorts, and has over-temperature protection. CAUTION The RA200 is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided.

CS½ 1400 Building on the reputation of the world-famous Peavey CS½ 800, which conquered the power amp market in the 1970s, the CS½ Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT compression/anti-clipping protection. With its 2RU design and power points up to 4080 watts, this latest evolution of the CS½ Series is leaner, louder and lighter than ever.

The PA435X was designed to meet the audio power amplifier needs of custom installed multi-zoned systems with high sonic quality. It is a 4-channel amplifier that is primarily intended to interface with the MRC88 whole-house audio video entertainment system for zones 7 and 8 preamp outputs or for sub-zone amplification of zones 1-6. It may also be used as a standalone single or 2-zone amplifier.

100 watts of all tube tone, in an incredibly rugged, roadworthy amp loaded with features. 3 channels, each with individual preamp, volume, and bright switch controls; parallel, mixable effects loop with channel volume controls, overall power amp master volume, a depth control for bottom end response, illuminated push button channel selectors, and an included 3-function footswitch. Handmade in the long standing Soldano tradition of quality.

The Crown Macro-Tech i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail putting sound quality above all else. Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste. Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road. Global Power Supply is designed to deliver maximum power no matter what country you work in. Built-in load, line voltage, input and output monitoring. Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location.

The CX302V 2-Channel is designed to meet the specialized needs of sound contractors. It is design from the ground up, combining QSC s exclusive PowerLight technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX302V is the ideal solution to any permanently installed sound system.

4 Channels, Frequency Response: 20 Hz - 20 kHz

The PLX2 series is a range of premium quality high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology PLX2 amplifiers combine light weight superlative audio quality and proven QSC reliability. The PLX3102 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading) or when extremely high power bridge mono operation is required. The PLX3102 features built-in subwoofer processing filter switches and front panel indications of bridge mono status.

The RA150 is designed to provide more power and betterperformance, at a lower overall cost per watt than the earlier RA100.As a result, it can more closely match the power needs of virtually anypassive speaker or studio monitor, and provides a crisp, clean signalfor outstanding performance and extended speaker life.

No Description

No Description

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

550 Watt amplifier. XLR, 1/4 in., Neutrik Speakon, 5-Way binding post connectors., The new P-Series amps are an ideal match to Yamaha's popular Club Series loudspeakers and deliver a robust amount of pro quality power in a wide range of configurations designed to suit most any need. To achieve this, they're designed with big power output, and equipped with YS (Yamaha Speaker) Processing to deliver a signal that is tuned to the needs of the Club Series loudspeakers.

No Description

The D-45 is perfect for moderate power applications such as recording or broadcast studio near-field monitoring, video suite audio monitoring, a recording/broadcast headphone amp or a small paging system. Designed, built and carefully checked to ensure reliable operation with a wide variety of loads, Crown D-45 amplifier is convection cooled. Their high reliability is particularly important in reducing maintenance costs.

The new 4-channel CX amplifiers give you four channels in only two rack spaces - without compromising on power. With high output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently installed sound system.With PowerWave technology, CX amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerWave also cuts waste heat, boosts reliability and gets rid of unwanted noise and hum. PowerWave is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230, 000 times a second through an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean.

With TransTube&, you get a killer amp with widely ranging dynamics and natural "grit, " just like a tube amp!üüFeatures:ü*25 watts (rms) ü*8 inch super-duty Blue Marvel speaker ü*Two switchable channels: clean and lead ü*3-band EQ ü*Tape/CD input ü*Mod

Ashly TRA-4150 4-Channel 150W @ 4 Ohm or 70V Power Amplifier New Ashly's TRA-Series expands on the SRA's concept of "the right amp for the job." These 2RU amplifiers utilize our state of the art technology to create advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. Four models are available in two and four channel configurations, with power ratings of 75W and 150W per channel @ 4 ohms, 70V and 100V. All audio controls of the

Input sensitivity & imp: .77V Freq resp: 10 Hz 50 kHz @ 1.5 dB XLR & , 6.5mm jack, balanced & RCA unbalanced inputs IPP high-power output to drive professional loudspeakers without clipping 3 Speakon outputs for channels A/B/bridge 5-way binding banana plug channel outputs Comprehensive front panel indicators including signal, clip, protect & bridge Stereo, parallel mono & mono bridge Front-to-rear airflow & cooling fan for thermal stability & reliability Variable speed fan for low noise Limiter circuit switch for amp output protection DC output protection & short circuit protection Bridge control & ground lift switches Total harmonic distortion: less than 0.1% 5000W Signal-to-noise ratio: 20 Hz 20 kHz @ 100 dB

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

This power amplifier features Accelerated Transient Response (ATR) technology that gives your audio dynamic punch and thermal overload protection on each channel to ensure safe operation.

Crown CTS2000 2-channel Power Amplifier, 1, 000 Watts per ch. @ 4 Ohms/70V Building on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements. CTS-2000 Features High power density in a 2RU chassis Crown Switching Power Supply for lighter weight Selectable "Constant-Voltage" or low-impedance (4/8ohm) operation per channel 100V direct outputs Legendary Crown class-I (BCA) and AB+B outputtopologies offer the best in amplifier reliability Comprehensive array of indicators provide accuratediagnostics Fully PIP2-compatible HiQnet compatible Power Output Dual mode, 2, 4 or 8 ohms: 1000W Dual mode, 16 ohms: 625W Dual mode, 70V or 100V: 1000W Bridge mode: 2000W Specif

This is a Brand New Acoustic Image Coda Series IV 2-Channel 600-Watt Combo Amplifier. Acoustic Image Model Number 611 AA 5 inch Mid-High range Driver Frequency response: 40Hz-16kHz Output: 600 Watt Switch Mode Power Amplifier Weight: 20 lbs Size:15"W x 12"H x 13"D Switchable Dual Voltage Operation (115/230V) Molded Polymer Enclosure Three-Band EQ Preamp Section Per Channel Limiter Switch Combo Jack Inputs (Either 1/4 in or XLR) Phantom Power on XLR Inputs (48v | 10 mA) Input and Master Level Controls Effects Loop with Return Level Control Per Channel Digital Effects with 6 Presets and Level Control Switchable Notch/Low Cut Filter per Channel Balanced Direct Out with Ground Lift Mute Switch and Pre/Post EQ for Direct Out Stereo capable with external power amp 600 Watt Mono output The Acoustic Image CODA S4 includes a fitted slip cover with cord storage pocket and shoulder strap

The RMX Series amplifiers give you clean dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched performance at a new breakthrough pric

Marathon DJ-6000. Great for professional DJ & entertainers who demands power on a limited budget. Every DJ Series amplifier provides excellent performance for all the speakers. Reliable features such as Input Gain, Ground Lift Switch to eliminate hum, Power LEDs, Channel 1 & 2 level, LED’s indicator, Stereo, parallel mono and bridge modes, Clip indicator and each DJ Series amplifier also comes with dual speed DC fan for efficient cooling and prevents overheating. Power Handling: 2 x 900 Watts @ 8 Ohms / 2 x 1800 Watts @ 4 Ohms / Up to 6000 Watts @ 8 Ohms. Features: Input Gain (dB), Power LEDs, Signal Activity LEDs (Signal), Overload LEDs (Clip), Fault LEDs (Fault), Power Switch, Channel 1 & 2 Level LED Indicator, Cannon and Input Jack Connector, Mode Switch, Ground Lift Switch, Binding Post Outputs, Power Select 110V-120V or 220V-240V Power Supply, Power Input IEC Power AC, Fan Grill Two 2 Speed DC Fans.

Ideal for powering near field monitors or a headphone amplifier, the Servo 120 gives you "reference-class" audio performance and reliability in a compact package. A perfect fit for recording, live sound and home theater situations, the 120's bipolar design and toroidal transformer power supply ensure reliability and quiet performance. A headphone jack with a speaker-disable switch lets you work through late night mixing sessions without disturbing anyone.