Musical Instruments

The RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance transformer and a fused power line. The MOSFET output stage is fault protected which allows the RA200 to forgive momentary output shorts, and has over-temperature protection. CAUTION The RA200 is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided.

Professional 4, 000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Genuine all-tube warmth with big, bold power and state-of-the-art features. 300 all-tube watts for amazingly rich and creamy tone, 2-channel tube preamp, compressor, footswitchable channel switching, 10-band graphic EQ, and extensive patching capabilities provide everything a modern bassist with a golden ear could hope for. 6 - 6550 power tubes, plus 3 - 12AX7s and a 12AT7 produce that cascading full tube tone that solid state can only emulate. 26"W x 11"H x 16"D. 75 lbs.

RMX 850 amplifier delivers true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16 deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.

An amp with the power and sound output to play any venue. Touch-sensitive dynamics and unmatched versatility have made the Fender Hot Rod DeVille 410 the amp of choice for guitarists of every stripe. Delivers 60W of power fueled by matched Groove Tube 6L6s to 4 - 10" speakers. Features an effects loop, extension speaker jack, and genuine Fender reverb. Includes cover and 2-button footswitch.Order the official Fender cover to protect your investment.

At the heart of the all-tube Peavey ValveKing 112 Combo Amp is a patent-pending, Class A/B Texture control that allows variable selection and combinations of Class A and Class AB power structures. The Texture knob lets you coax a wide range of tones out of this amplifier. It features 12AX7 preamp and 6L6GC power amp tubes; a specially voiced 12" ValveKing speaker; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel (with optional footswitch); global reverb control; a buffered effects loop; and external speaker jack.

Spider Valve fuses the versatility of amp and effects modeling with the performance and feel of a world-class tube amplifier. Combining award-winning Line 6 modeling technology with a genuine tube amplifier designed by legendary amp designer Reinhold Bogner, Spider Valve delivers unmatched performance, responsiveness and tonal flexibility on the stage and in the studio.

Behold the Reissue Blues DeVille 410—a vintage-style tube amp with “boutique tone at a great price that many a pro rock, country and blues player has used to superb effect. The Reissue Blues DeVille pours 60 watts into four 10 blue Alnico-Magnet Eminence speakers, fueled by two 6L6 output tubes and three 12AX7 preamp tubes. Its two channels, “normal (with bright switch) and “drive, are voiced for classic blues, country and rock; other features include Fender(R) spring reverb, an effects loop and two-button channel footswitch. The great look includes tweed covering, “chicken head pointer knobs and a chrome control panel.

Professional 2, 000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Product Features: Guitar, Amps and Accessory Type: Guitars Amps; Guitars Amps Type: Guitar Amp Heads, Guitar Power Amps; Musical Instrument Type: Guitars, Amps and Accessories

MPN: p5000s

Product Features: Guitars Amps Type: Guitar Power Amps; Live Performance Equipment: Power Amps

The light weight and portable PV series powered speakers deliver high fidelity and impressive power using Peavey's patented and legendary speaker and power amp technology. 400W peak available power; DDT compression; RX 14 titanium compression driver; 15" High performance woofer with 2.375" voice coil; Pole mountable cabinet; LED signal present and DDT activation indicator; Rugged carpet covered enclosure; Combination 1/4" and XLR input; XLR and 1/4" through outputs. The PV is housed in a durable wooden, carpet covered enclosure that includes a pole mount.

The Crown Macro-Tech i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail putting sound quality above all else. Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste. Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road. Global Power Supply is designed to deliver maximum power no matter what country you work in. Built-in load, line voltage, input and output monitoring. Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location.

The single-channel Windsor Studio amplifier features a footswitchable Boost button that increases the preamp level. Now you have the flexibility of a dual-channel amp plus control over the dynamic response. You also get the rich distortion characteristics of Windsor amp's class-A tube power topology. The Boost function can be used as an overdrive feature for the power section or simply as a volume boost for soloing. This 15-watt amplifier uses two 12AX7 preamp tubes and one EL34 power-amp tube in a single-ended configuration with no negative feedback. The power section is designed to accommodate 6L6GC, 6550, 6CA7, KT88 and KT66 octal power tubes, as well as variations on those types. Peavey's exclusive Power Sponge™ output attenuator incrementally adjusts the power output of the amplifier while maintaining the distortion characteristics of the power amp at any chosen volume level.

The RA2100b FET Stereo 100W Ch. 25V Mono - 70V Stereo Amp. 100 Watts RMS per output 4 Ohm. 85 Watts RMS per output 8 Ohm. 200 Watts RMS into 70 Volt 8 Ohm. 1/4" and RCA inputs.

The CS Series is the global standard bearer for workhorse reliability. These amps benefit from Peavey's most popular audio innovations, including exclusive DDT compression/anticlipping protection. Circuitry to protect against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.

Ampeg's Portaflex PF-350 delivers legendary Ampeg tone in an ultra-compact design that pushes out a hefty 350W. Tools like a built-in limiter, FX loop and direct out provide flexibility for the gigging bassist. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampeg's iconic Portaflex originals.

The Blues Junior, a warm-toned favorite, takes a 15-watt tube preamp/power amp platform and pushes it through a 12 Fender(R) Special Design speaker. That sound comes courtesy of a pair of EL-84 Groove Tube output tubes and three 12AX7 preamp tubes. Add the renowned Fender(R) reverb, flexible controls, and FAT circuit with footswitch for golden tones, and you're in business. And just look at that chrome panel, that black textured vinyl with silver grille cloth, and those vintage pointer knobs.

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Extremely flexible 3 discrete channel, 100w all tube head spring reverb, effects loop, Rear panel power tube bias section, Black Chrome Chassis & Steel Grill, 3 mode footswitch included

Budda : Guitar Amp Heads | Buy your SuperDrive 30 Guitar Amp Head at Samash.com. We offer financing options! The SuperDrive Series II amps capture the elusive 'brown sound' that vintage style crunch amps are known for. Voiced to compete with the most demanding and aggressive amps, the SuperDrive 30 has the girth and gain to cover any style of music you play. From the darker tone palette of a vintage Plexi to the compressed sweetness of a vintage AC30, the SuperDrive has a voice that is distinctl

The Crown XTi4002 Power Amplifier features state of the art technology for efficient, lightweight, and clean power which is perfect for a variety of speaker set-ups. There's no debate when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

No Description

The IPR 3000 boasts 1500 watts per channel at 2 ohms and is less than 7 pounds. Advanced design reduces weight while increasing output power, reliability and thermal efficiency. Also features a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. And all at a cost that shatters the old-guard paradigm of power-amp valuation.

In a historic collaboration, Fender introduces its first artist signature amplifiers-EC Series amps bearing the name of legendary guitarist Eric Clapton. Built to the exacting specifications of Clapton himself, the EC Twinolux is a fascinating variation on the tweed '57 Twin amp and our answer to his call for a special model with several distinctive features. Handmade in the United States with '50s-era output tube bias tremolo (which produced a more throbbing pulse than later Fender tremolo circuits) and a switchable power attenuator (reduces speaker output and can disable one speaker for even lower output), it presents the pinnacle of personally inspired amp tone for stage and studio alike and is a must for Clapton fans and guitarists who want the ultimate in tube performance.

Built for players who demand the most from themselves and their equipment, the MB-1200 is a powerful 1200 watt mono-block power amplifier designed to be part of a discreet system, with each component dedicated to a single task- thus creating a versatile, expandable bass rig easily able to accommodate venues of unlimited size.

Extremely flexible 2 discrete channel, 50w all tube head, spring reverb, effects loop, Rear panel power tube bias section Black Chrome Chassis & Steel Grill, 2 mode footswitch included

550 Watt amplifier. XLR, 1/4 in., Neutrik Speakon, 5-Way binding post connectors., The new P-Series amps are an ideal match to Yamaha's popular Club Series loudspeakers and deliver a robust amount of pro quality power in a wide range of configurations designed to suit most any need. To achieve this, they're designed with big power output, and equipped with YS (Yamaha Speaker) Processing to deliver a signal that is tuned to the needs of the Club Series loudspeakers.

Peavey ValveKing® amps feature a patented variable Class A-A/B control called Texture™ which allows sweepable selection between Class A and Class A/B power structures as well as any combination of the two. With this feature guitarists can coax virtually any tone from this tweaked-out amplifier.