Garden

Oregon 396-732 John Deere Gator Mulcher G6 Replacement Blade 16-5/8-Inches. Do not use with mulching kit installed.

No Description

Fusion blades have all of the great features of the Gator Mulcher Magnum blades, but they also include Fusion technology in their cutting edge. Fusion blades have an ultra-hard layer fused at the blade's cutting edge, which means that the blade remains sharp and continues to give a clean cut far longer than standard blades. Gator Mulcher Magnum Fusion blades are thru-hardened to a Rockwell C-scale hardness of 50 for optimum safety and durability, then individually straightened for a precision cut. Blades can be sharpened like any standard mower blade, although they will wear wheels much quicker. Gator Mulcher Fusion blades are made in the U.S.A. What about wet grass? Gator Mulcher blades actually work better in wet grass than standard blades. This is because the turbulence created by the tips of the teeth helps to keep the grass from clumping together.

Oregon 396-775 John Deere Gator Mulcher G6 Replacement Blade 25-Inches. Supplied with washer. Washer must be used on all models.

The Oregon 88-025 is a 1/3 HP standard-duty grinder with a 8-inch hardened grinding wheel and it uses rubber feet for smooth operation. The easy to use height adjustment makes adjustment for different blades fast and simple. It is designed to only sharpen right hand cut blades because of the single direction motor by will sharpen any length of a cutting edge.

No Description

No Description

Oregon 98-054 MTD Replacement Blade With 6 PT Star Hole 16-1/4-Inches. Need 3 for 46" cut - star center hole, deep deck, 1997 & after. Use (2) 98-054 & (1) 98-069 for 46" cut. Outside blades for 46" cut model series 600 & 800 built since 1997.

The Oregon 88-025 is a 1/3 HP standard-duty grinder with a 8-inch hardened grinding wheel and it uses rubber feet for smooth operation. The easy to use height adjustment makes adjustment for different blades fast and simple. It is designed to only sharpen right hand cut blades because of the single direction motor by will sharpen any length of a cutting edge.

No Description

Blade grinder features a 1/2 HP standard-duty motor with reversing switch for grinding in both directions with an 8in. hardened red stone.

No Description

No Description

Oregon 98-019 MTD Replacement Blade 18-7/8-Inches. (2) for 38" cut, side discharge. Fits models 476, 487, 490, 493, 494, 495, 496, 497, 497F, 497P, 498, 628, 720, 760, 765 S/D, 138-495A, 138-497A, W7-BG-497B etc.

No Description

Fits: Bunton, Great Dane, Lesco, Scag, Snapper, & Wright Stander Mowers. Gator Mulching blades are an excellent well designed and well built blade that are long lasting and do an excellent job cutting your grass. They are designed to work with your discharge chute open. The teeth on the backside of the blade to not re-cut the grass. They simply redirect the airflow under the deck, rather than focusing air on discharging the grass, they direct air towards the center of the blade. Your grass will be cut and then sucked back to the center of the blade so the clipping can be cut more than once before it is discharged. The end result is that you get less long clippings laying on top of your lawn. The clippings will be considerably smaller and it will fall down into your standing grass rather than laying on top in piles or windrows. You can block off your deck opening for leaves and it will work fantastic. If you block your deck off for grass, keep in mind you will only be able to cut a small amount of grass on each pass. If you try to cut too much grass it will fill your deck with grass and you will have to slow your mower considerably. Then if you still are trying to cut too much material the grass will start rolling out the back of the deck in balls and wads. The gator blades are not a 100% foolproof mulching solution, but they make a huge difference over conventional blades. Many customers report that they take a little less horsepower to run and they stay sharp as long if not longer than their standard blades. In the fall while mulching leaves Gator Blades are an excellent tool. If you can block off your opening of your deck for leaves and use gator blades, they will shred the leaves into tiny confetti like pieces. After the first rainfall the leaves are gone.

Replacement mower blades by Oregon. These blades are made to exact OEM specification for optimum performance. Each blade is thru-hardened to a Rockwell C-scale hardness of 50 for optimum safety and durability, then individually straightened for a precision cut.

Oregon 98-496 MTD Replacement Blade 18-5/16-Inches, Need (2) for 36" cut, side discharge, deep deck, 1989 & after.

Gator Mulcher 3-in-1 Magnum Fusion blades are the highest quality blade we offer. Fusion blades have all of the great features of the Gator Mulcher Magnum blades, but they also include Fusion technology in their cutting edge. Fusion blades have an ultra-hard layer fused at the blade's cutting edge, which means that the blade remains sharp and continues to give a clean cut far longer than standard blades. Gator Mulcher Magnum Fusion blades are thru-hardened to a Rockwell C-scale hardness of 50 for optimum safety and durability, then individually straightened for a precision cut. Blades can be sharpened like any standard mower blade, although they will wear wheels much quicker. Gator Mulcher Fusion blades are made in the U.S.A.What about wet grass?Gator Mulcher blades actually work better in wet grass than standard blades. This is because the turbulence created by the tips of the teeth helps to keep the grass from clumping together. The updated 3-in-1 Gator Mulcher blades work even better in wet grass than the old style because they move more air and discharge the clippings faster.Learn more about Fusion Blade Technology (934K PDF file)Blade Length 16-1/2" (41.9cm) Blade Width 2-1/2" (6.25cm)Blade Thickness .250" (6.35mm)Center Hole Diameter 5/8" (16mm)Fits the Following Machines:Bunton (3) for 48" cut, V series deckReplaces Bunton Part Number PL4205Ferris (2) for 32" Cut, (3) for 48" cutReplaces Ferris Part Number 20843SGreat Dane (3) for 48" cutReplaces Great Dane Part Number D18086AJohn Deere (3) for 48" cutReplaces John Deere Part Number AM104489Lesco (3) for 48" cutReplaces Lesco Part Numbers 5011, 21871, 50111Scag (2) for 32" cut, (3) for 48" cutReplaces Scag Part Numbers A48110, A48184, A48184HL Simplicity (3) for 48" cutReplaces Simplicity Part Numbers A48184HL, A48184Snapper (3) for 48" cutReplaces Snapper Part Number 1-7043Toro (2) for 32" cut, (3) for 48" cutReplaces Toro Part Numbers 107-3196-03 (Recycler Blade), 107-3192-03 (Hi-Flow Blade), 107-3195-03

Oregon 95-900 96-900 21-Inch Gator Mulcher 3-N-1 Lawn Mower Blade For AYP/Poulan Brand new, factory sealed Module Number: 96-900 Shipping Package Dimensions: 21 x 2.5 x 0.2 inches ; 2.6 pounds Shipping Weight: 3 pounds Replaces OEM No. 138971, 138498, 127843, 138498, 131323, 138791 Blade length (measured diagonally): 21-inch Blade width 2.5-inch Blade center hole diameter 0.630-inch Star Shaped Width: 2.50in. And Thickness: .187in. Oregon is a world leader in mower blade manufacturing. Our patented Gator Mulcher 3-N-1 blades redirect the airflow allowing the grass clippings to be cut into small pieces. They will allow mowers not equipped with a mulching blade to reduce the volume of blade clippings and will reduce your fall leaf cleanup time.

Product Features: Garden Tool Type: Mulchers; Type: Garden Tools

Product Features: Type: Garden Tools

Oregon 95-033 Poulan Pro Replacement Blade With Star Center Hole 19-5/16-Inches. Need (2) for 38" cut, model PP125H38B, star center hole.

Product Features: Type: Garden Tools

No Description

FOR SALE THREE NEW GATOR MULCHER HI-LIFT QUALITY REPLACEMENT BLADES OREGON XTENDED CUTTING LENGTH CROSS-REFERENCE WITH YOUR CURRENT OREGON BLADES IF YOU DON'T CURRENTLY USE OREGON BLADES, E-MAIL US THE SPECS ON YOUR MOWER -CROSSES WITH THE FOLLOWING BLADES - OREGON BLADES: 91-381, 91-383, 91-401 LENGTH 16 5/8" CENTER HOLE 51/64" WHAT'S A GATOR MULCHER BLADE? THE GATOR MULCHER BLADES UNIQUE DESIGN HAS REVOLUTIONIZED THE WAY BLADES MULCH CLIPPINGS. THE ANGLE OF THE GATOR TEETH REDIRECTS THE AIR F

Oregon 98-032 MTD Replacement Blade 30-Inches. 30" cut, side discharge. Fits models 410, 412, 790, 795, 796, 797, 138-796A, 138-797A, W7BG796-B 1990 & after.

Replaces OEM No.752234 Blade length (measured diagonally): 21.8-inch Blade width 2.5-inch Blade center hole diameter 0.63-inch Outer hole: 0.38-inch

Oregon 90-514 Fitz-All Universal Replacement Blade 22-Inches. Exclusive Oregon Fitz-All center hole fits 95% of all lawnmowers made. Each blade requires an adapter (see Oregon adapter kit 02-034) unless being used to replace an MTD blade with the "bow tie" (rectangular) center hole such as 742-0740, 742-0640, 742-0741, 742, 0642, 742-0742, etc.

BRAND NEW OREGON BLADE GRINDER / SHARPENER MODEL: 88-025 1/3 HP Motor Ample power in a compact, affordable unit 8 Hardened grinding wheel Hardened stone for smooth quick grinding Rubber feet for smooth operation Keeps vibration and grinder walking to a minimum On/Off safety switch Prevents unauthorized or accidental operation Lower cost More affordable for all sizes of operations Limited lifetime warranty Unit is new and never used and in original box. FREE SHIPPING!ANY WARRANTY ISSUES