Car Audio and Video Accessories

No Description

Sealed subwoofer boxes tend to be much smaller than ported enclosures, since they use the air inside the box as a "spring" for the enclosure. If you do not have much space, it would be a good idea to go with a sealed box. Not only is there a size difference, but there is also a difference in sound compared to a ported box. Generally, the larger the box, the lower the tone of the bass achieved. However if the box gets too large, the "spring" effect that the air creates may be lost, losing loudness and crispness. Sealed enclosures produce tight, accurate bass and have a flat frequency response curve. They are the enclosure of choice when quality is the ultimate goal of the system set up.

Fits: 1990 - 1992 GEO PRIZM 1993 - 2005 SUBARU IMPREZA 2002 - 2005 SUBARU IMPREZA WRX 1990 - 1994 SUBARU LOYALE 2000 - 2004 SUBARU OUTBACK 1987 - 1992 TOYOTA CAMRY 1984 - 2002 TOYOTA COROLLA 1987 - 1988 TOYOTA COROLLA FX 1992 - 1997 TOYOTA PASEO 1987 - 1998 TOYOTA TERCEL

No Description

These Speaker Adapters will convert Toyota Factory Speakers to 6.5 Inch Aftermarket Speakers of your choice. Toyota Vehicle Fitment: 4Runner 2003-2009 (Rear Speakers) Avalon 2005-2011 (Rear Speakers) Celica 2000-2005 (Front and Rear Speakers) Corolla 2001-2011 (Front Speakers) Echo 2000-2005 (Front Speakers) Highlander 2008-2012 (Rear Speakers) Matrix 2002-2011 (Front and Rear Speakers) Prius 2001-2011 (Front and Rear Speakers) RAV 2001-2011 (Front and Rear Speakers) Sequoia 2003-2011 (Front and Rear Speakers) Sienna 1998-2012 (Front and Rear Speakers) Solara 1998-2003 (Front Speakers) Tacoma 2005-2012 (Rear Speakers) Tundra 2000-2012 (Rear Speakers) Tundra 2003-2006 (Front Speakers) Venza 2009-2011 (Rear Speakers) Yaris 2007-2012 (Front Speakers) Yaris Liftback 2007-2012 (Rear Speakers)

No Description

No Description

WILL ACCOMMODATE A FULL RECESSED DIN UNIT WITH A POCKET. FITS AN ISO MOUNT UNIT WITH A POCKET USING METRA'S SNAP-IN ISO RADIO SUPPORTS. WILL MOUNT TWO STACKED ISO UNITS. CAN BE USED TO INSTALL A DOUBLE DIN UNIT.

Car Stereo Reverse Wiring Harness For Toyota Scion Lexus 1987-2007 OEM Radio (71-1761) Item: Wire Harness Male Plug For Toyota, Lexus, Scion in dash OEM radio. Brand: Xtenzi Cables. Compatible models : Function and compatibility, All Wires are Color Coed and Marked for Easy Installation See EIA color reference. Fits: select Toyota, Scion, Lexus 1987-2007 non-Amplified models. Scion: 2005 TC 2004 - 2005 XA 2004 - 2005 XB Toyota: 1987 - 2005 4-Runner 1995 - 1999 Avalon 1987 - 2005 Camry 1987 - 2004 Celica 1987 - 2005 Corolla 2000 - 2005 Monte Carlo 1988 - 1993 Cressida 2000 - 2002 Echo 2001 - 2004 Highlander 1987 - 1996 Landcruiser 1987 - 2002 MR2 2004 - 2005 Prius 1996 - 2004 RAV4 2001 - 2004 Sequoia 1996 - 2004 Sienna 1995 - 2005 Tacoma 1999 - 2004 Tundra Lexus Non-Amplified models: ES250 (1990-1991) LS400 (1990-1992) LX450(1996-1997 ES-250 (1991) GEO Prizm 1989-1992 This innovative product for car radio installations allows the installer to wire an OEM factory radio into a car where the original radio harness is damaged or missing, or into another vehicle. Plugs into Original Equipment factory radio (Power/4 Speaker) Wires have been color-coded using the aftermarket radio industry standard (E.I.A. Color Code). Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new wire provides more flexibility, power handling and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. All top quality design features. Xtenzi wires are 7" in length. A handy chart on the back of the package allows you to easily make all of the radio's wire connections. Caution: Just in case the specific model is not shown or cannot find replacement part please Email us or call us, Or not sure if this one is fully compatible please consult us before you place order. Thank you (x-pert-s)

FEATURES ? Factory textured ABS plastic. ? Fits DIN, ISO, Double ISO & Double DIN mount radios. ? Installs single DIN or single ISO mount radios with pocket or (2) double ISO mount radios. ? Recessed DIN opening (single DIN only). ? Includes double ISO trim panel and single ISO trim ring. ? Custom designed mounting brackets, features DIN sleeve support rails and ISO mount capabilit ? Includes snap-in "DIN size pocket". ? Fully illustrated instructions and mounting hardware included.

FEATURES :Designed specifically for the installation of double-DIN radios or two single-DIN radiosHigh grade ABS plastic - contoured, textured & painted to compliment factory dashComprehensive instruction manualAll Necessary hardware for a complete installation, including factory brackets used for multiple applications Toyota Double DIN Multi Kit Mitsubishi/Nissan/Toyota

This innovative product for car radio installations allows you to wire anaftermarket radio into a car without cutting and splicing the factory radioharness. Save time, money, and guarantee a safe and secure connection. Wheninstalling your stereo, don't settle for less than Metra.Turbowire Features:High impact, OEM quality, ABS plastic molded connector for the perfect fitOEM quality terminals, makes the most secure connection possible between the terminals and the connectorNew GSXL wire provides more flexibility, power handling and heat resistancePrecision hand assembled terminals are pressure-inserted into the plug (this makes it almost impossible to pull a wire out)Pre-stripped end leads allow for easy connectionsWires are color-coded using the aftermarket radio industry standard (E.I.A. Color Code)A handy chart on the back of the package allows you to easily make all of the radio's wire connections

Metra Electronics 99-8204 998204 TURBOKits; Radio Installation Kit; Incl. Instructions/Hardware; For ISO DIN w/Recessed Mounting w/Quick-Release Bracket;

2003-up Premium Sound Interface Allows you to connect a new car stereo to the factory amplifier in select 2003-up Toyota vehicles

11 TOYOTA SNA DBL DN W/PKT2011-Up Toyota Sienna Single/Double DIN In-Dash Installation KitAccommodates single and double DIN mounts

Contoured to match factory dash.

HARNESS FOR VEHICLES (WITH OR WITHOUT XM AND SIRIUS SATELLITE RADIO IN TOYOTA AND SCION APPLICATIONS).

Metra 99-8205. Fits an ISO mount unit with a pocket using Metra's snap-in ISO radio supports. Will mount two stacked ISO unists. Can be used to install a double DIN unit.

No Description

Toyota DIN W/Pocket or Double DIN Kit

Brand New Speaker Grilles in Factory Toyota Packaging. Installation instructions are included.

Brand New Speaker Grilles in Factory Toyota Packaging. Installation instructions are included.

For select 2004-2006 Toyota factory radios with controls for an optional CD changer or satellite radio, this cable provides a direct audio input from any iPod with a dock connector, and it also charges the iPod while connected. By using the dock connector for audio output, the highest musical sound quality is achieved- much better than any FM transmitter or headphone adapter can provide. The iPod's click wheel controls are still used for song selection, play control, etc. Note: This part is NOT compatible with vehicles featuring factory equipped external CD changers, satellite radio turner, navigation, or video systems. Not compatible with 2006 Toyota 6-disc in-dash radios. Toyota Applications Avalon - 2003-2005 4Runner - 2003-2005 Camry - 2005 Celica - 2003-2005 Corolla - 2005 Highlander - 2004-2005 Land Cruiser - 2003-2005 Matrix - 2005-2006 MR2 - 2003-2005 Sequoia - 2003-2005 Sienna - 2004-2005 Solara - 2003-2005 Tacoma - 2005-2006 Tundra - 2003-2005

NEW '2010-Up Toyota Prius DIN Head Unit Provision with Pocket (Car Audio & Video)

No Description

No Description

Turbokits let you install an aftermarket radio in your vehicle's factory dashopening, while making the installation look as clean and professional as the OEMradio. They are uniquely designed to provide the right combination of strength, appearance and versatility. They are the industry standard for installationkits... often copied, never duplicated. When installing your stereo, don'tsettle for less than Metra.Turbokit Features:High impact, OEM quality, ABS plastic constructionWhenever possible, Turbokits mount to the factory radio mounting locations. This provides an easy install with strength.Turbokit radio openings will hold either DIN or ISO DIN units and, where there is enough room in the dash, some of Metra's Turbokits will accommodate 2 ISO mount units or 1 Double DIN unit.Snap-in ISO mount radio supports hold any ISO style radio secure; just screw them to the side of the ISO mount unit and snap it into the opening. If the radio needs to be removed, use a flat blade screwdriver to release the snap tab and out slides the radio.Under radio storage pockets are provided where possible. They are full depth pockets that hold plenty of stuff. Very functional!Turbokits have been designed with exacting tolerances, so they match the factory dash contours perfectly. There are never any gaps between the dash and the kit.ISO trim rings are provided for a custom looking install

** Allows connection of After market Antenna to the factory antenna cable harness. ** Has a Female Motorola plug on one end and OEM jack on the other ** No Cutting or Wiring Needed - Plug N Play connection (no experience necessary) ** Aftermarket Antenna & Motorized Antenna Adaptor ** Plugs directly into AFTERMARKET ANTENNA then into cars Factory OEM Antenna Socket ** Antenna Adapters are usually Required when Installing an aftermarket antenna for the first time ** Allows AM/FM Radio to still work w/ After market Antenna ** Connects the factory antenna cable to any aftermarket antenna (both standard or Automatic Motorized) ** THIS ADAPTER is used when Replacing OEM STOCK ANTENNA to an AFTERMARKET ANTENNA **ALLOWS AN AFTERMARKET ANTENNA TO FUNCTION WITH STOCK ANTENNA PLUG ** REQUIRED INSTALL PART IF FM RADIO IS TO BE MAINTAINED ** REQUIRED WHEN INSTALLING A MOTORIZED AFTERMARKET ANTENNA ** Allows connection of After market Antenna to the factory antenna cable harness. ** Has a Female Motorola plug on one end and OEM jack on the other ** No Cutting or Wiring Needed - Plug N Play connection (no experience necessary) ** Aftermarket Antenna & Motorized Antenna Adaptor ** Plugs directly into AFTERMARKET ANTENNA then into cars Factory OEM Antenna Socket ** Antenna Adapters are usually Required when Installing an aftermarket antenna for the first time ** Allows AM/FM Radio to still work w/ After market Antenna ** Connects the factory antenna cable to any aftermarket antenna (both standard or Automatic Motorized) ** THIS ADAPTER is used when Replacing OEM STOCK ANTENNA to an AFTERMARKET ANTENNA **ALLOWS AN AFTERMARKET ANTENNA TO FUNCTION WITH STOCK ANTENNA PLUG ** REQUIRED INSTALL PART IF FM RADIO IS TO BE MAINTAINED ** REQUIRED WHEN INSTALLING A MOTORIZED AFTERMARKET ANTENNA

Metra 99-8201 FEATURES:Specially designed for ISO mount radios. Contoured to match factory dash.

When you need to install an ISO mount radio in a 2000 and up Toyota Celica or Echo, this specially designed Turbokit does the job