Building Supplies

Bypass the ignition switch on any engine with solenoid starter switch. Switch lets you crank the engine while working in the engine compartment.

dave-di Store Electrician's Scissors with Stripping Notches Since 1857, the company operated by Mathias Klein and his descendants to the fifth generation, has grown and developed along with the telecommunications and electrical industries where Klein pliers first found major usages. Today, Klein Tools, Inc. represents much more than Klein pliers.

Heat-treated. Overall Length: 12 . Diameter: 1-1/16 . Point Diam: 3/8 . Material: Forged Alloy Steel. Finish: Black Oxide.

Button shaped magnet has almost unlimited applications. Retrieves screw and steel parts. Center hole in top of magnet for easy fastening.13 core hole. 4 lbs pull.75 diameter.50 height. Carded. Length: 1. Width: 5.63. Height: 2.75

For digging in sandy light soils. Rolled step prevents material build-up. Blade Length: 11-1/2 . Blade Width: 9-1/4 . Blade Tip Shape: Round Point. Socket Length: 9 . Handle Length: 28 . Handle Type: D-Grip. Blade Material: Steel. Handle Material: White Ash Poly.

Heat-treated

YBZ1165: Features: -Made of low carbon material.-1-1/2 .-Nickel plated. Specifications: -0.24 wire diameter.

No Description

Nominal Current: 440MA. Max. voltage to ground: 1000V. 1 per Pack. Manufactured to the highest quality available. Huge selection to choose from.

A modern circuit tester with time tested durability. Quickly and safely tests high and low voltages (power and ground) on all vehicles including computerized engine and body controls. Tests 6 12 and 24 volt systems. High impedance - current draw less than 18 milliamps to protect sensitive electronic sensors microprocessors electronic ignition components and air bags. Dual color LED indicates red for power (high) and green for ground (low). 6 heavy duty 18 gage dual leads with large battery clips. Leads can be attached regardless of polarity. Includes Protect-A-Terminal probe adapter to prevent damage to electrical connectors. Can be used as a standard single circuit tester. Instructions included.

Features and Benefits:. Rugged drop-forge design. Works well in confined areas. The pieces are also available individually as replacement parts: 3435-71 1/4 3435-72 3/8 3435-73 1/2 These tools are used to turn sockets with a wrench or by hand in limited access areas.  They come in a set of which includes 1/4 3/8 and 1/2 drive socket caps.

Designed for light duty applications. Not intended to be used for load bearing or critical applications. Do not use in overhead lifting or any application where disengagement could result in property damage or serious bodily injury. Use for pet leashes horse leads ancillary saddlery and tack hanging plants tarp covers flagpoles key rings gate closures and towel holders. Nickel finish. T7607502: .38 x 2-7/16 x .38 . T7616412: .50 x 2-11/16 x .38 . T7616602: .75 x 4 x 9/16 . Length: 3. Width: 1. Height: 5

QUICK CHANGE BIT HOLDR 2 1/2IN Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release.

Alloy steel material, galvanized zinc finish, threaded pin locking type, screw pin shackle type. Meets the design requirements of federal specification RR-C-271, type IV galvanized to ASTM A-153 specifications 419-S, 419-G screw pin meets the design requirements of federal specification, RR-C-271, type IVA, grade A, class 2 testing and approvals.

WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications.Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.

No Description

Drop-forged heat-treated. Overall Length: 10 . Diameter: 1-1/16 . Point Diam: 1/4 . Material: Forged Steel. Finish: Black Oxide.

ODK2548: This item features: -Campbell s Cable is either 7x7 or extra flexible 7x19 construction. -High strength cable with a zinc finish. -Vinyl coated cable is more resistant to abrasion and weathering. -No. of Strands: 7. -Material: Steel. -Type: Solid Braided Rope. -Packing Type: Reel.

Spring snap link. Designed for use with chain repair dog leashes swings hammocks and restraining gates. Zinc. 5/16 opening and width of small end.25 thinnest part of snap. 2-.38 overall length. Length: 0.25. Width: 1. Height: 2

Tapers are uniform and blend into body diameter. Heat-treated. Overall Length: 7-1/2 . Diameter: 11/16 . Point Diam: 5/16 . Material: Forged Alloy Steel. Finish: Black Oxide.

Locking mechanism retains accessories in place preventing accidental release. Slide button design for the sure retention of accessories. Nickel chrome high polish finish for long tool life. Heat treated drop forged alloy steel for strength. Features a locking tang. Locking feature holds sockets in place and prevents then from becoming disengaged with the sockets. Features a knurled shank for easier handling.

Plastic reel is encased in an extra thick corrugated merchandiser. Each spool hangs independently with the use of the 3’’ spool case cradle. The spool case controls and contains the level wound cable, eliminating run-off and dangling.

Vinyl coated cable is more resistant to abrasion and weathering. Can be cleaned easily. 1/8" to 3/16" Size with Coating. 340 lbs Working Load Limit.

Heavy-Duty steel tray braces provide added strength and support when pouring heavy loads. Glide-ring design on steel trays wont catch shovels or hoes.

Heavy duty undercarriage with solid back leg brace. Ball bearing wheel, 2 ply radial tire and tube. Wooden cross stays for extra tray support. Foot pads for longer life. Glide rings on tray for easier removal of material. Black steel tray with oversized lip for rigidity, with 60" handles.

No Description

No Description

Motorcycle Tie Down 1 x 6 - 400 lbs Capacity. 1 Chrome and 1 PVC coated hook. Includes cam buckle and hooks. Dimensions: 2.3 H x 3.7 W x 7.1 D.

Quick link. Zinc finish. 3/16 x 1-.63 x 9/16 x 2 . Length: 0.37. Width: 2. Height: 1.13

Grommet kit. Use to repair canvas tarpaulins tents awnings sailcloth lawn furniture and pool covers. Setting tool has knurled body for greater comfort and safety. Setting tool and anvil are coded with lines for each individual size grommet.50 . Includes 12 brass grommets hole cutter hardwood backer block hardened mandrel and anvil. Length: 8.6. Width: 1.5. Height: 2.8