Boating and Sailing Accessories

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN Length of top: 12' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Information Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Beige/Tan Length of top: 12' Width: 8'..designed so it easily adjusts to fit widths between mount points of 92" to 100" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Burgundy Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Burgundy Length of top: 10' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Shademate offers more choices of shade for your pontoon boat. Built tough with marine-grade materials, these sleek-looking pontoon tops are available with your choice of three outstanding top fabrics. Not only do these long-lasting fabrics come with great warranties, but they are each sewn with Profilen Extra thread thats guaranteed to last as long as the fabrics. More sizes mean youll find just the right amount of shade for your pontoon boat. Well-built anodized aluminum frames are available in both 1" square and 1-1/4" square tubing for a better match to your pontoon railing. Pontoon tops are 8 long. Standing height: 75". Each pontoon bimini top comes with wiring for navigation light and a FREE matching storage boot.White Vinyl Traditional-Style Bimini Top With 1-1/4" Aluminum Frame - Traditional rail mount bimini top includes stainless steel mounting hardware, front tensi...

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Burgundy Length of top: 8' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Deluxe Pontoon Bimini 96 Inch Width X 56 inch Height X 8 Ft Hot Shot FabricWholesale MarineTaylor Made Products Hot Shot Pontoon Bimini Tops. Don't let too much sun cut you boating day short. These bimini tops provide lots of refreshing shade while affording you visibility over your windshield instead of through it. These tops are free standing provide more air circulation and can be mounted in several locations on the boat. NOTE: Bimini Top should never be opened when boat speed is over 25 mph.: Features Hot Shot Fabric Heavy Duty thick wall 1 inch square anodized aluminum tubing Bow straps for extra support Sewn in bow sleeve helps eliminate (Parachuting Effect) Both horizontal and vertical hardware is included Non-Corrosive high desity nylon fittings Adjustable polypropylene tie downs straps and strap eyes included Bimini Boot included All sizes shipped unassembled and ship UPS Bimini Top Size: Width: 96' Height: 56' length: 8' Bimini Top Fabric Type: Hot Shot Material: Acrylic Coated Polyester Mildew & UV Resistant Weight: 6.25 oz

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Beige/Tan Length of top: 12' Width: easily fits width between mount points of 91-96 Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Beige/Tan Length of top: 10' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 8' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Burgundy Length of top: 8 feet Width: easily fits width between mount points of 97" and 103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN Length of top: 10' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 12' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. Identical Warranty exchange only. No refunds.

Shademate offers more choices of shade for your pontoon boat. Built tough with marine-grade materials, these sleek-looking pontoon tops are available with your choice of three outstanding top fabrics. Not only do these long-lasting fabrics come with great warranties, but they are each sewn with Profilen Extra thread thats guaranteed to last as long as the fabrics. More sizes mean youll find just the right amount of shade for your pontoon boat. Well-built anodized aluminum frames are available in both 1" square and 1-1/4" square tubing for a better match to your pontoon railing. Pontoon tops are 8 long. Standing height: 75". Each pontoon bimini top comes with wiring for navigation light and a FREE matching storage boot.White Vinyl Traditional-Style Bimini Top With 1" Aluminum Frame - Traditional rail mount bimini top includes stainless steel mounting hardware, front tension s...

Buggy-style Bimini Top is designed specifically for pontoon boats. The frame is made of sturdy 1'' square anodized aluminum tubing to match the 1'' square rail sizes of today's popular pontoon boat designs. Each Pontoon Bimini Top comes with nylon f

Deluxe Pontoon Bimini 102 Inch Width X 56 inch Height X 8 Ft Hot Shot FabricWholesale MarineTaylor Made Products Hot Shot Pontoon Bimini Tops. Don't let too much sun cut you boating day short. These bimini tops provide lots of refreshing shade while affording you visibility over your windshield instead of through it. These tops are free standing provide more air circulation and can be mounted in several locations on the boat. NOTE: Bimini Top should never be opened when boat speed is over 25 mph.: Features Hot Shot Fabric Heavy Duty thick wall 1 inch square anodized aluminum tubing Bow straps for extra support Sewn in bow sleeve helps eliminate (Parachuting Effect) Both horizontal and vertical hardware is included Non-Corrosive high desity nylon fittings Adjustable polypropylene tie downs straps and strap eyes included Bimini Boot included All sizes shipped unassembled and ship UPS Bimini Top Size: Width: 102' Height: 56' length: 8' Bimini Top Fabric Type: Hot Shot Material: Acrylic Coated Polyester Mildew & UV Resistant Weight: 6.25 oz

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Grey Length of top: 10' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Beige/Tan Length of top: 12' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN Length of top: 12' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Blue Length of top: 12' Width: easily fits width between mount points of 85-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

These sturdy pontoon bimini top fittings will replace your old bimini top hardware. Adjusts from 27" to 32".

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN, Length of top: 12' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Shademate offers more choices of shade for your pontoon boat. Built tough with marine-grade materials, these sleek-looking pontoon tops are available with your choice of three outstanding top fabrics. Not only do these long-lasting fabrics come with great warranties, but they are each sewn with Profilen Extra thread thats guaranteed to last as long as the fabrics. More sizes mean youll find just the right amount of shade for your pontoon boat. Well-built anodized aluminum frames are available in both 1" square and 1-1/4" square tubing for a better match to your pontoon railing. Pontoon tops are 8 long. Standing height: 75". Each pontoon bimini top comes with wiring for navigation light and a FREE matching storage boot.White Vinyl Buggy Top with Side Tails and 1" Aluminum Frame - Buggy-style rail-mount bimini top includes stainless-steel mounting hardware, front tension strap...

Toll Free Question Hotline 1-800-609-9457. Sales hours: Monday - Friday 10a.m. to 2p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GRAY/GREY Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday - Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 10' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday-Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Burgundy Length of top: 12' Width: easily fits width between mount points of 84-90" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Warranty exchange only. No refunds.

Deluxe Pontoon Bimini 96 Inch Width X 56 inch Height X 8 Ft Hot Shot FabricWholesale MarineTaylor Made Products Hot Shot Pontoon Bimini Tops. Don't let too much sun cut you boating day short. These bimini tops provide lots of refreshing shade while affording you visibility over your windshield instead of through it. These tops are free standing provide more air circulation and can be mounted in several locations on the boat. NOTE: Bimini Top should never be opened when boat speed is over 25 mph.: Features Hot Shot Fabric Heavy Duty thick wall 1 inch square anodized aluminum tubing Bow straps for extra support Sewn in bow sleeve helps eliminate (Parachuting Effect) Both horizontal and vertical hardware is included Non-Corrosive high desity nylon fittings Adjustable polypropylene tie downs straps and strap eyes included Bimini Boot included All sizes shipped unassembled and ship UPS Bimini Top Size: Width: 96' Height: 56' length: 8' Bimini Top Fabric Type: Hot Shot Material: Acrylic Coated Polyester Mildew & UV Resistant Weight: 6.25 oz

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. Specifics for this top: Color of fabric: Blue Length of top: 8' Width: easily fits width between mount points of 85-90"Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline 1-800-309-5190. Sales hours: Monday - Friday 8:30a.m. to 4:30p.m. Central Standard Time Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 7/8" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: GREEN Length of top: 8' Width: easily fits width between mount points of 91-96" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.

Toll Free Question Hotline: 1800-309-5190. Monday - Friday 8:30am to 4:30pm Central Standard Time. Vortex Bimini Tops are made with the best marine fabric available. The fabric is marine polyester that is treated and sealed in multiple ways. Specifically, it is double polyurethane coated on the bottom, or down side, as well as UV protected and mildew protected. Polyester and acrylic are very similar for bimini tops. Polyester has a very rich color and holds up to UV exposure very well. Vortex Bimini Tops are simply the best option out there due to the quality, warranty, and incredible value. As far as the support system/framework, it is made with 1" round tube anodized aluminum. Anodizing is just a process that increases corrosion resistance and wear resistance of a metal. Aluminum is the best metal for the framework of a bimini top. Then, it is treated to make it even better. The fittings and hardware are all heavy duty nylon and stainless steel(mounting screws hooks, and eye straps). Instructions are included with the Vortex Bimini Top. Installation is very easy for anyone with even moderate handyman type skills. It is a very easy 2 person job, with very very basic hand tools. A cordless drill, tapemeasure, screwdriver, pencil, etc. It is a 1 to 2 hour job...maybe a little less with a helper. _______________________________________________________ Specifics for this top: Color of fabric: Blue Length of top: 10' Width: easily fits width between mount points of 97-103" Height: 54" (when mounted to top of rails/gunwales, which averages 18-24" high), makes for nice overall height from boat floor of 6 to 6 1/2 ft high. 5 year warranty on defects in materials, both for frame and for fabric. We guarantee you will be satisfied with you Vortex Bimini Top. Vortex Bimini Tops..the best top...the best value..simply the best... Identical Warranty exchange only. No refunds.