Boating and Sailing Accessories

Back Mount Rack Steering System Length 13' Maufacture Teleflex, Part Number SS14113 Please Be Carefull When Ordering Some Items May Share The Same Image For Similar Products

A special snap-in cable design that doesn t require special tools to connect the cable to the helm cuts installation time dramatically. A trapped nut in the engine end also helps speed the installation process. This is the system most widely used by boat builders today and replaces most original equipment systems. Fast three turns lock-to-lock Compact rotary helm is suitable for most boats to 24' Includes steering cable with stainless steel output ends and 3/4" tapered steering wheel shaft Order steering wheel and link-arm kits separately

Master Lock Fortress 4-Hook Steering Wheel Lock is designed to provide protection to the vehicle from theft. This lock features four hooks and withstands multiple steering wheel cuts. It is easy to install and is corrosion resistant.

For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Precise, comfortable four turns lock-to-lock steering Uses Back Mount (SSC134 or SSC135*) steering cables Single- or dual-station, though NFB steering systems are recommended for dual-station applications * For use in dual station set up

The Rack Steering Package - 17 Feet - Features gives boater a feeling of total control and reliability. The ideal replacement for most other systems. For boats up to 24 feet and wheels up to 16 inch. Direct replacement for other make steering systems i.e. MORSE, OMC, DETMAR. Kit includes 1 helm, 1 90 degree bezel, 1 steering cable.

For virtually all of todays OBs with wheels up to 16 diameter. Single cable for most boats. Dual cable for boats with engine flutter or steering instability. Replaces Teleflex SafeT steering systems without dash modification.

Product Features: Navigation and Steering Type: Steering Wheels

For most of the power-assisted sterndrive boats with wheels up to 16'' diameter. Safe-T QC helms have been made since 1968 with little or no dash modifications. Requires use of SSC62 QC steeRing cable. For single Station use only. Features Quick response of 3 turns lock-to-lock. Standard 3/4'' tapeRed steeRing shaft. Stainless steel Cable output ends. Fast, easy installation: uses simple snap-on Cable connection, Teleflex QC Cable & industry-Standard Safe-T Mounting hardware. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements. Uses SSC62 Replacement cables.

Back Mount Rack Steering System Length 14' Maufacture Teleflex, Part Number SS14114 Please Be Carefull When Ordering Some Items May Share The Same Image For Similar Products

ST60 Plus Graphic DisplayHigh resolution multi function repeater with user programmable displays.Our award winning ST60 instruments made better The ST60 Plus instrument line features new mounting bezels that compliment Raymarines popular CSeries a...

No Description

The Rack Steering Package - 10 Feet - This unique back mount rack system allows fast and easy installation and delivers a precise and comfortable steering feel. Suitable for use on outboard and stern drive boats. Applies to virtually all power-assisted stern drive boats with wheels up to 16 diameter. back mount replaces 1984-date teleflex the rack steering without dash modification.

Rotary Steering Kits Safe-T QC Rotary Steering System - 10 Feet Package - Ideal for traditional boat applications, Safe-T QC suits inboards, small outboard and power assisted stern drive applications. The kit contains the following 1- SH5094P, helm1- SB27484P, 90 degree bezel kit, 1- SSC62XX steering cable, hardware and instruction sheets. Features 3.0 turns lock-to-lock, standard 3/4 tapered steering shaft. Available either as separate components or as a complete system ready to install fast, easy installation uses simple snap-in connection, teleflex quick connect (QC) cable and industry standard safe-t mounting hardware tilt options available kits include cable, helm, bezel, hardware and instructions.

A special snap-in cable design that doesn t require special tools to connect the cable to the helm cuts installation time dramatically. A trapped nut in the engine end also helps speed the installation process. This is the system most widely used by boat builders today and replaces most original equipment systems. Fast three turns lock-to-lock Compact rotary helm is suitable for most boats to 24' Includes steering cable with stainless steel output ends and 3/4" tapered steering wheel shaft Order steering wheel and link-arm kits separately

A special snap-in cable design that doesn t require special tools to connect the cable to the helm cuts installation time dramatically. A trapped nut in the engine end also helps speed the installation process. This is the system most widely used by boat builders today and replaces most original equipment systems. Fast three turns lock-to-lock Compact rotary helm is suitable for most boats to 24' Includes steering cable with stainless steel output ends and 3/4" tapered steering wheel shaft Order steering wheel and link-arm kits separately

Wise Deluxe Pontoon Steering Console. Mount your steering wheel, throttle box and gages. Features easy access door on front, double cup holders and kick skids. Won't rot, mildew, or soften due to the elements... making this Steering Console a Wise choice for the long run. Premium grade, high-density polyurethane compression foam padding is covered with a moisture barrier. And the marine-grade 28 oz. vinyl is loaded with plenty of mildew and UV inhibitors to keep it looking like new for many nautical miles to come! Upholstery is sewn with Dacron polyester thread for even more durability. Measures 32 1/2"h. x 26"w. x 18"d. State Color. Order yours today! Wise Deluxe Pontoon Steering Console

Teleflex steering wheel. Stealth style. For a 3/4" tappered shaft. Made with U.V. and corrosion resistant marterials.

There simply isn't an easier way to upgrade to the comfort and control of No Feedback steering. The special snap-in cable design cuts installation time dramatically, and allows you to upgrade to precision steering in practically no time at all. Compact rotary helm fits right into existing Teleflex rotary steering dash cutouts, so no modifications are needed Lightning fast three turns lock-to-lock, with excellent helm response Compact rotary helm is suitable for boats with top speeds under 50mph Includes the new Safe-T II helm, 90 bezel, 3/4" tapered steering wheel shaft and Quick Connect steering cable Order steering wheel and link-arm kits separately

There simply isn't an easier way to upgrade to the comfort and control of No Feedback steering. The special snap-in cable design cuts installation time dramatically, and allows you to upgrade to precision steering in practically no time at all. Compact rotary helm fits right into existing Teleflex rotary steering dash cutouts, so no modifications are needed Lightning fast three turns lock-to-lock, with excellent helm response Compact rotary helm is suitable for boats with top speeds under 50mph Includes the new Safe-T II helm, 90 bezel, 3/4" tapered steering wheel shaft and Quick Connect steering cable Order steering wheel and link-arm kits separately

The Rack is Teleflex's most economical steering system. Perfect for small to mid-size boats and speeds up to 50 mph. Features Rack and Pinion precision, 4.0 turn steering and easier than ever installation. Direct replacement for most older systems. Available: 11-16 foot Gas Motor Accessories

Soft Grip Steering Wheel provides a comfortable, firm grip with contemporary styling 2;great for bass boats, sport boats and runabouts. Steering wheel features a soft black PVC outer rim and high-impact plastic inner core. Resists UV rays to prevent fading. Non-magnetic so it will not interfere with compass readings. Diameter: 13". Depth: 3-3/8". Fits all standard 3/4" tapered shafts.

For most of today's O/B's V-4 & smaller, 50 MPH or less w/wheels to 16'' diameter. Replaces Standard Safe-T steeRing without dash modification. For single Station use only. Patented No FeedBack steeRing mechanism. Quick response of 3 turns lock-to-lock. Minimal clutch-free play. Standard 3/4'' tapeRed steeRing shaft. Fast, easy installation: uses Teleflex Quick Connect Cable & Standard Safe-T Mounting hardware. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements. Uses SSC62 Replacement cables.

There simply isn't an easier way to upgrade to the comfort and control of No Feedback steering. The special snap-in cable design cuts installation time dramatically, and allows you to upgrade to precision steering in practically no time at all. Compact rotary helm fits right into existing Teleflex rotary steering dash cutouts, so no modifications are needed Lightning fast three turns lock-to-lock, with excellent helm response Compact rotary helm is suitable for boats with top speeds under 50mph Includes the new Safe-T II helm, 90 bezel, 3/4" tapered steering wheel shaft and Quick Connect steering cable Order steering wheel and link-arm kits separately

Thick-walled, plastic, roto-molded consoleHeavy-duty, 28-oz., marine-grade vinylMildew resistant and UV treatedAccepts steering wheel, throttle box and gaugesFront inside access door panel Double cup holdersManufacturers 6-year warranty on frame/3-ye

A special snap-in cable design that doesn t require special tools to connect the cable to the helm cuts installation time dramatically. A trapped nut in the engine end also helps speed the installation process. This is the system most widely used by boat builders today and replaces most original equipment systems. Fast three turns lock-to-lock Compact rotary helm is suitable for most boats to 24' Includes steering cable with stainless steel output ends and 3/4" tapered steering wheel shaft Order steering wheel and link-arm kits separately

Features Rugged Uv Resistant And Non-Corroding Marine Grade Materials. Suitable For Mechanical Steering Systems. 3 Spoke. Diameter: 13\ Diameter: 13\" Part Number(s): TEL SW59691 TEL-SW59691 TEL_SW59691 TELSW59691 1-SW59691 "

RPU160 Drive Unit Hydraulic steering systems are now being used in every category of small vessel. In many respects hydraulic steering is preferable to mechanical steering. Hydraulic systems normally comprise of two main components, a steering wheel pump and steering cylinder(s). The steering wheel pump may be either a gear pump or a plunger pump. Which ever type is installed, steering is achieved by turning the steering wheel in either direction causing oil from the wheel pump to be supplied to the appropriate side of the cylinder. Oil is returned via the opposite side of the cylinder back to the pump. The linear motion of the cylinder rod is transformed to a rotary motion by the tiller, which turns the rudder shaft and rudder. Check valves (non-return valves) are usually incorporated to prevent the rudder driving the steering wheel pump. If an autopilot is to be included in such a hydraulic steering system, then the oil flow providing the rudder movement must be controlled by electrical signals from ...

4 turns lock-to-lock. Patented No-Feedback technology. Steering loads are locked out until wheel is turned. For ...

Teleflex Marine Rack & Pinion Nfb Steering Systems Ss151 Complete Package Length 10ft.. 4 Turns Lock-to-lock. Patented No-feedback Technology. Steering Loads Are Locked Out Until Wheel Is Turned. For High-performance Single Outboards. Systems Bolt Up To Older Teleflex The Rack" Rack & Pinion Dashboard Cutouts.

TeleFlex "The Rack" Original Equipment Rack and Pinion Steering System- 15' Item Details and Description Up for auction is a brand new Teleflex "The Rack", original Rack and Pinion Steering System. This is Teleflex original part number SS141. This auction is for a 15' system. Gives you a feeling of total control and reliability as the ideal replacement for most other systems. This item is a direct replacement for other make steering systems (ie. Morse, OMC, Detmar). This is for wheels up to 16" and for boats up to 24'. Easy to install back mount rack design: helm and cable install as one unit from behind the dash Exceeds A.B.Y.C. standards Meets N.M.M.A. certification requirements Kit Includes Rack Cable, Helm, and Bezel (Steering wheel is not included)