Boating and Sailing Accessories

SEASTARreg br 1.7 STEERING KIT by TELEFLEXregbr KITwHELM, CYLINDER, FITTINGS, OIL, BLEEDER KITbr For single amp dual nonpowerassisted OB engines up to 300 HP 600 combined HP for counterrotating duals that have ABYC standa...

Replacement cylinders for single engines up to 300hp and dual nonpower assisted outboard systems up to 600hp. All cylinders allow independent trim and tilt. HC5345 is the most common of the front-mount pivoting outboard cylinders for SeaStar and SeaStar Pro steering systems. HC5342 Slide Plate Cylinder fits Johnson/Evinrude 250-300hp V8 from 1988-1997.

For outboard powered boats up to 140 horsepower (Total) Maximum. Kit comes complete with everything needed for an install. The cylinder utilizes the factory outboard engine supplied drag link for simplified installation. Two lengths of 20' cut to fit tubing are supplied. Kit includes: BayStar Helm Pump(HH4016), BayStar Cylinder (HC4600), BayStar Tubing Kit(HT4425), 2 Bottles of hydraulic steering fluid (HA5430), and Filler Kit (HA5438).

SEASTARreg br 1.7 STEERING KIT by TELEFLEXregbr KITwHELM, CYLINDER, FITTINGS, OIL, BLEEDER KITbr For single amp dual nonpowerassisted OB engines up to 300 HP 600 combined HP for counterrotating duals that have ABYC standa...

Make turning your single or twin motors (up to 600 hp with twin motor setups) easy with a full hydraulic power assist. Suitable for heavier boats and speeds up to 60 mph, these lowfriction hydraulic systems come complete with helm, cylinder, fittings, oil, a bleeder kit and mounting instructions. Available: 16, 18ft hose length. Sports and Outdoors

SeaStar PRO by Teleflex is the ultimate No FeedBack steering system, designed to handle the performance of today's top-end bass boats. SeaStar PRO offers no-compromise comfort, control and steering response for single engine outboards up to 300 HP, even with options like jack plates and performance props. This is the steering system of the BASS Masters Classic since 1994, and the choice of high performance outboard boat builders who need the ultimate in steering. Available in easy-to-install kit: helm, mounting hardware, oil, instructions & cylinder to fit most outboards made since 1984. See application guide below for engines that require additional hardware. NOTE: Hoses must be ordered separately. For hose length, measure intended hose routing or existing cable path and add 2 feet to allow for engine tilt and steering cylinder movement. (Steering wheel sold separately).

We are selling a new Teleflex SeaStar 3/4 inch Dual Hydraulic Steering Fitting Kit. Teleflex part number HF5514. This is a 3/4" bulkhead fitting kit. Contains 4 connector fitting & nipple, 2 street elbow-3/8" Tube (M), 1/4" NPT (F), 2 Tee fitting- 2 ends-3/8" tube (M)-center-1/4" NPT (F), 4 Washers & 4 nuts. This SeaStar fitting kit is for dual cylinder installations. GLS Stock Number: 1010874FS--1PY2--B2

Product Features: Navigation and Steering Type: Hydraulic Steering Systems

Make turning your single or twin motors (up to 600 hp with twin motor setups) easy with a full hydraulic power assist. Suitable for heavier boats and speeds up to 60 mph, these lowfriction hydraulic systems come complete with helm, cylinder, fittings, oil, a bleeder kit and mounting instructions. Available: 16, 18ft hose length. Sports and Outdoors

Teleflex Seastar Sport Tilt. Teleflex Seastar Sport Tilt Made by: Teleflex Part Number: 6217223

Seastar Hydraulic Outboard Steering System Single and multiple non-power-assisted outboard engine applications up to 300 hp for singles (600 hp for counter-rotating twins). Patented Pivot design allows independent engine tilt in dual engine installations. Includes Helm, Cylinder, & Oil. Excludes Hose Helm - HH5271 - SS Helm 1.7 Fr/Mnt Pump, Hydraulic, Rotary Pos Cylinder - HC5345 - High Strength Tiller Bolt Included FEATURES Patented No FeedBack Steering lock valves Low friction hydraulic steering system 5 turns from lock-to-lock (single cylinder) Compact helm has only a 4-7/16 foot print needs only 3 dash hole (Tilt requires larger hole) Standard 3/4 tapered steering shaft

Ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Kit Contains: SeaStar 1.7 Front Mount Helm (HH5271), Pivot Mount Outboard Cylinder (Black) (HC5345/58), and (2) 1 Quart of SeaStar Oil (HA5430). Hose NOT included.

Ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Kit Contains: SeaStar 1.7 Front Mount Helm (HH5271), Pivot Mount Outboard Cylinder (Black) (HC5345/58), and (2) 1 Quart of SeaStar Oil (HA5430). Hose NOT included.

Teleflex Seastar Sport Tilt. Teleflex Seastar Sport Tilt Made by: Teleflex Part Number: 6217223