Boating and Sailing Accessories

3M Scotch-Brite Roloc Surface Conditioning Discs quickly removes cork or paper gaskets and form-in-place...

AIRHEADs new 12 Volt Hi Pressure Air Pump w/ Pressure Release Valve produces 3 times the pressure of other 12 volt air pumps. Adapters are provided for all popular valves including stem, Boston, Leafield, Bravo, Hulkey Roberts and more. A removable pressure release valve limits the output to 1.4 psi, the perfect inflation pressure for towables. This powerful pump draws too many amps to plug into a cigarette lighter. Hook it up to your car, truck or boat battery with the alligator clips connected to a 10 foot power cord. Volume: 410 liters/min. Draws 28 amps.

The first line of defense in your engine's cooling system is a raw water strainer. These Raw Water Strainers are unequalled for quality and longevity in the marine industry. Features include traditional bronze strainer head, cast mounting brackets, and 304 stainless steel filter basket. The buna-N O-ring seal at the strainer cap ensures there will be no leaks under pressure or vacuum. The unique mounting system allows removal of the entire strainer without tools, and the screw-on strainer cap allows for easy maintenance. Install with pipe or hose.

Shore power male plug 50 Amp 125/250V. Marine grade twist lock construction with stainless steel fasteners.

Fits 19-20' boat Keel Enhances handling, improves tracking. Very simple product to install Increases the value of your boat Eliminate the need for costly repairs

Shore power organizer bag. Heavy duty nylon zippered bag with handle. Ideal for storing cord sets and adapters.

No Description

Threaded Collar Pole Light Mounting Base(2 Pin) - Plug-In Type Base5#176; RakeConstructionStainless SteelBlack PlasticWaterproof snap-on coverPigtail LeadsFits Figs. 1343 1348 1451 1470 1622 and 1656 SeriesAll-Round Pole Lights Product : PERKO PLUG BASE ONLY 2 PIN STAINLESS STEEL Manufacturer : PERKO Manufacturer Part No : 1048P0SDP UPC : 085226370397

Cast bronze. Similar to 322 series except neck is threaded to between 1 and 1-1/2" from flange. Pipe size and maximum hull thickness are given below.

The Tram 1610-HC 5ft VHS Marine Antenna covers all marine-band frequencies and features a heavy-duty fiberglass construction.

Groco Bronze Thru-Hull Fittings are threaded with NPS (straight) male pipe thread, and are for use with Groco Seacocks or with any product with straight female pipe thread.

The Minn Kota& MKA-32 electric steer quick-release bracket allows you to quickly remove your motor, with a cam-lock design that eliminates bracket movement and noise. The upper and lower plates include a slot for securing with padlock (not included). It also includes a composite cover that attaches to the lower half of the bracket when the motor is removed, keeping the deck profile clean.

White red graphics on a black dial background. Very low profile bezels follow the curve of the lens to eliminate water trapping. Pointers are white wblack hub. Thrudial perimeter lighting provides excellent night visibility.

Product Features: Maintenance and Care Type: Hardware

Severe keel damage is a common boating nightmare. Rocks, ramps, sand, coral and debris in the water can all take a toll on your boat or personal watercraft. The KeelGuard is an easytoinstall keel protector that is tough enough to take the abuse so your boat won't have to. Developed by a boat designer who spent years investigating the best protective materials, this unique guard adheres along the keel using extremely strong 3M pressure sensitive acrylic adhesive the same adhesive used by NASA on the space shuttle. Independent radar speed tests have demonstrated smaller boats and personal watercraft protected with KeelGuard consistently achieves higher topend speed. The patent hydrodynamic channel ribbing enhances handling and improves tracking. The 6foot KeelGuard fits boat lengths of 17'18' and PWC's. ScotchBrite pad, primer and burnishing tool included. Colors: Black, Charcoal, Gray, Light Gray, White, Almond, Sand.

Teleflex Morse Teleflex Morse 90 Deg-Big-T-Bezel Chrome 1Pc Made by Teleflex Morse Part number 1-SB27268P

Product Features: Maintenance and Care Type: Hardware

Quality Rule Bilge Pumps - Excellence In Design And Performance Silent, vibrationless 12V motor Totally submersible Moisture-tight teflon seals Will not burn out when run dry Ignition-protected. Rule submersible bilge pumps have set the industry

These are Cannon Downrigger replacement up/down switches and the rubber switch boot (cover). The description Cannon part number and pictures are in the list and table below.The Momentary Down Switch is compatable with older pre Mag Series Cannon downriggers and the Shortstop Switch is compatable with Mag 10 15 and 20 downriggers. The Switch boot (cover) fits both switches.

Perko Garboard Brass Drain and Plug Kit. Fits flush to your boat's transom or exterior, allowing water to drain when trailered. Highest quality Drain and Plug available... made from brass for maximum corrosion resistance. 1/2" NPT Plug threads, 2"-diameter Drain. Order Today! Perko Garboard Brass Drain and Plug Kit

Bases for bow and stern light poles. Contacts are nickel plated and rubber covered to resist corrosion.

The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank. Heavy duty construction for use on commercial or pleasure boats. Multi-position mounting bracket. 1-1/2'' inlet and 1-1/2'' discharge outlet. Pumps an amazing 3800 GPH. 12VDC.

This adapter is equipped with covers and sealing collars and is for use in wet locations. Marinco?s 30A 125V molded cordsets feature a line-up ridge on both the plug and connector ends. The notch lines up with the ground blade to provides permenent and correct orientation.

81A Attaches to cordset or boat inlet 15 or 20A 125V Straight Blade Attaches to dockside receptacle or cordset 30A 125V Locking 81A Attaches to cordset or boat inlet 30A 125V Locking Attaches to dockside receptacle or cordset 15A 125V Straight ...

Cast Bronze. Flange Is Machined To Fit Hull And Grooved To Retain Bedding Compound. Neck Is Threaded To Approximately 3/8\ From Flange. With Flange Nut. Pipe Size And Maximum Hull Thickness Given Below. Hose Size\": 2 Hull\": 2-3/8 Flange\": 3-5/8 Hose Size\": 2 Hull\": 2-3/8 Flange\": 3-5/8 Part Number(s): PKO 0322009PLB PKO-0322009PLB PKO_0322009PLB PKO0322009PLB 9-0322009PLB "

No Description

Product Features: Maintenance and Care Type: Bilge Pumps, Hardware

Scotty 1071 Laketroller Clamp Mount Manual DownriggerNo. 1071 Clamp MountComes with fully portable anodized aluminum clamp for mounting on the gunnel or transom 2 opening.Great for aluminum boats and canoes...

Designed with a full-length solid forged lock pin that can not pull out; easy quarter-turn locks and unlocks head Can not pop open or be falsely locked Patented design features an O-ring and watertight cap to help seal dirt an

Water pump kit for Johnson - Evinrude (OMC). Kit includes gasket o-rins impeller stailess steel bolts and housing. Replaces part number 435929 5001595 for 90-115SL (1995-up) 120-125ESX (1993-94) 120-130-140-150-175-V-6 V-8 (1993-up).