1/2-13 X 5 GRADE B7/2H FASTENER KIT (10 PACK)

1" Hex Ratchet Wrench allows use with both 3/8" (9.5 mm) and 3/4" (19.1 mm) draw studs. High-impact, rugged plastic carrying case. Includes: Ratchet Wrench - 1" Hex(Greenlee 34941), 1/2" Conduit Punch/Die(Greenlee 721-1/2 /14722), 3/4" Conduit Punch/Die(721-3/4 /124AV), 1" Conduit Punch/Die(721-1/126AV), 1-1/4" Conduit Punch/Die(721-1-1/4 /128AV), 1-1/2" Conduit Punch/Die(Greenlee 721-1-1/2 /440AV), 2" Conduit Punch/Die(721-2/442), Ball Bearing Draw Stud with 1" Hex Head–3/8" x 1-5/8"(Greenlee 00042), Ball Bearing Draw Stud–3/4" x 2-15/16"(Greenlee 304AVBB), Plastic Case(Greenlee 34758)

Industrial Pro 2-1/2" X 1-3/8" Bi-Metal, High Speed Steel, Cobalt Hole Saw. METCO # HS2 12. Use Cat # 20756, 20758 or 20759 mandrels. 8% cobalt high speed steel teeth treated to 64 HCR. Thickened machined base for stability. Heat treated body for maximum resistance. 4/6 variable tooth pitch for aggressive cutting. 10 positive rake angle enhances cutting tough materials. Cuts mild to hardened steel, stainless steel and most polymers, wood, plumbing and electrial fittings, etc.

HELICOIL #1/2-13 TAPS, H3, 8CPB, ST/FL ***LOT OF 4 TAPS*** THIS ITEM IS NEW IN ORIGINAL MFG. PACKAGING. Ideal Item #DNFW-06442 Bay Loc:SH23-C-03 Pic:P1140038 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Shoots both 1-1/2 and 2-1/2 x .131 - .162 diameter plastic and paper collated joist nails with a quick tool-less size adjustment Multi-Blow design and pressure actuation promotes much safer usage over single shot competitors Works with both hardened tip and standard tip joist nails saving you big $$$ on fasteners As light as anything on the market at only 4.8 lbs(!) and features a balanced design resulting in reduced fatigue Utilizes the nail tip as a guide to ensure you hit the hole every time, Manufacturer: Grip-Rite

When we say Pro-Twist is the best, most complete fastener line around, we make a good point. Because the quality of the point is what makes a fastener superior. And Pro-Twist fasteners from PrimeSource are made with high-carbon-content steel for a sharper, stronger point. In fact, our 1022 carbon steel fasteners penetrate 20-gauge steel faster than anything else, and they eliminate strip-out in 25-gauge steel. Our unique thread design also contributes to faster penetration. With Pro-Twist fasteners, you always get faster, easier penetration and less installer fatigue. Pro-Twist fasteners meet very stringent manufacturing standards to meet the demands of the steel framing and drywall industry. And after manufacture, they are tested three times to ensure hardness, strength, correct dimensions and lightning-fast penetration time. Our color-coded packaging is designed to keep Pro-Twist faste

1/2-13 x 5 1/4 A193 B7 Stud FluoroKote#1® Blue - FluoroKote#1® possesses a low coefficient of friction which reduces torque requirements. When FluoroKote#1® coated fasteners are used, galling and seizing become problems of the past. Due to the absence of nut locking oxides after extensive exposure to corrosive environments, fasteners coated with this process do not need to be removed by torching, cutting or nut splitting. The easy on/off properties exhibited by these fasteners provide safe removal with wrenches. Lower your plant maintenance cost and increase safety by using FluoroKote#1® coated fasteners.

CRL 1/4"-20 A-T Series Insert Fasteners (100 Pack) CRL Riv-Nuts Steel Insert Fasteners can be used in light and medium duty fastening applications. They can be installed into thinner materials with greater ease than can be accomplished with weld nuts, pierce nuts, clinch nuts, thread tapping, and thread forming screws. They are "non-grip sensitive", one Steel Insert Fastener part number per thread size accommodates any grip over .030" (.76 mm), eliminating the need for various grip ranges. The unique feature of CRL Riv-Nuts Steel Insert Fasteners is the axial knurl under the flange of the insert. The expansion of the sleeve causes the knurl to bite into the parent material, providing greater torque resistance. Use CRL Riv-Nuts Steel Insert Fasteners to improve your product and speed up production. They"re ideal for high-speed installations, as well as low volume applications using manual tools. Blind Installation (Installs From One Side of Work) for Light to Medium Duty Fastening The Unique Method of Installi

1/2-13 x 5 A193 B7 Stud FluoroKote#1® Blue - FluoroKote#1® possesses a low coefficient of friction which reduces torque requirements. When FluoroKote#1® coated fasteners are used, galling and seizing become problems of the past. Due to the absence of nut locking oxides after extensive exposure to corrosive environments, fasteners coated with this process do not need to be removed by torching, cutting or nut splitting. The easy on/off properties exhibited by these fasteners provide safe removal with wrenches. Lower your plant maintenance cost and increase safety by using FluoroKote#1® coated fasteners.

Duckbill hooks are drop forged high carbon steel with the bill ground to a fine point. Features a drawn carbon steel socket, and a pick forged from high carbon steel before being driven into handle. Socket held securely in place with special retaining tabforged into pick. Handle turned from select White Mountain Hickory or Rock Maple, air dried to 18 percent moisture contact and precision fitted. Heads are painted, handles are clear lacquer finished. No.00120 for log sizes 6" to 16"; replacement handle No.00122. No.00240 for log sizes 6" to 16"; replacement handle No.00242. No.00260 for log sizes 8" to 24"; replacement handle No.00262 NOTE: Not to be used as a wedge or prybar. Load must be applied in direction of handle brand mark. Flexinghandle in a perpendicular direction of grain may cause handles fracture and result in personal injury.

1/2 Drop-in Anchor Setting Tool - Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2 inch and 3/4 inch coil threaded rod. The Lipped Drop-In (DIAL) features a lip at the top of the anchor body that keeps the top of the anchor flush with the concrete. This eliminates the need for precisely drilled hole depths and allows for easier flush installation, consistent embedment and uniform rod lengths. The Short Drop-In Anchor (DIAS) is for use in solid and hollow concrete. The short length enables shallow embedment that helps avoid drilling into rebar or prestressing strands. The wide surface flange allows the DIAS to be installed in deep or bottomless holes.